Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Conyers
Gate repair in Conyers usually means one of two things: a decorative wrought-iron driveway gate on a 1990s HOA lot that’s stopped opening, or a wide farm gate on acreage where the post has been heaved out of plumb by red clay. Either way, you need somebody who works on both, answers the phone, and doesn’t mind getting dirty in a horse pasture. We’ve been doing exactly that since 2001. Call (877) 610-2993 and you’ll get Hal Gatewood’s team, not a recorded menu.
We work across Conyers including 30012, 30013, and 30094, from the subdivisions off Flat Shoals Road out to the equestrian properties south of SR-138. Same-day visits for emergency repairs. Free estimates, quoted before any work starts, with the price you agree to being the price you pay.
Why Gatewood Fence & Gate Is Conyers’s Preferred Gate Repair Company
Hal Gatewood has been owner-operated since 2001. His name is on the shop, his address is published, and his license number is there for anyone to look up. That’s not marketing. That’s the oldest kind of accountability there is: the person who shows up is the person whose name is on the invoice.
We answer every call with a live person, 24 hours a day, seven days a week. Not a voicemail, not a dispatch queue in another state. When a gate fails at 9 p.m. on a Sunday and your driveway is blocked, somebody picks up. In Conyers that matters, because the lots are bigger, the driveways are longer, and a dead Conyers Gate Motor & Opener can strand a truck, a horse trailer, or a whole morning.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround. And every repair over $200 gets $40 off with no trip charge inside the county. Seniors and veterans get a permanent 10% discount. We print it on the estimate because we intend to stand behind it.
Our reviews from Conyers customers consistently mention two things: we show up when we say we will, and we fix the gate in place instead of hauling it off and selling a replacement. That repair-first philosophy runs through everything we do, from hinge welding to control board swaps.
Our Gate Repair Services in Conyers
Electric Gate Repair
Electric gate repair in Conyers covers an unusually wide range: the aging DC actuator on a subdivision ornamental gate, a dead control board on a 20-year-old automatic gate, and heavy-duty industrial operators on farm entrances. Most electric failures here start with the motor or the board, not the gate itself, which is why we also offer Gate Access Control in Conyers. We diagnose on site, replace only what’s failed, and stock common parts for DoorKing, Viking, and Elite operators so turnaround is days, not weeks.
Automatic Gate Repair
Automatic gates in Conyers fail in patterns. The 1980s-2000s housing stock means many automatic gate systems around neighborhoods like Honey Creek and Ellington are hitting 15 to 25 years old right now. Actuators wear out. Control boards burn. Safety edges crack in weather. On rural properties, the opposite problem shows up: operators that were undersized for the gate’s span and weight from day one. We match the operator to the gate and the duty cycle, not the other way around.
Hinge & Post Repair
This is the work that separates Conyers from every neighboring market. Georgia red clay swells with summer rain and shrinks in dry stretches. Your gate post sits in that soil, and over years it heaves. A 6-inch steel post set in concrete on a horse farm off SR-138 can tilt so far the gate binds at the strike and the opener burns out trying to move it. We reset posts deeper than the original footing, re-weld hinge plates on site with Conyers Gate Parts & Welding, and re-align the gate so it swings true. Fix the panel without the post, and you’ll fix it twice. We fix the post.
Gate Realignment
A sagging gate rarely sags in the middle. It sags at the hinge post, and that’s where we start. Gate realignment in Conyers often means correcting years of clay-driven post movement, re-drilling hinge mounts, and re-tensioning the gate frame. On farm gates, a sagging leaf may have snapped a hinge weld entirely. We weld that back in your driveway, with the gate standing where it belongs. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
While we’re out, we also handle lock and latch replacement, rust repair and re-welding of cracked pickets, and safety edge or loop detector replacement, which matters more around here than most places for reasons we’ll get to below.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Conyers
We’re certified to service nine major gate brands, and around Conyers the ones we see most are Viking, DoorKing, and Elite. Viking and DoorKing gear shows up on a lot of the heavier farm and estate gates east and south of town. Elite and Ghost Controls appear more on suburban driveway systems. We keep common actuators, control boards, and safety edge kits stocked for Conyers customers so the fix doesn’t wait on a freight truck. If we don’t have it on the truck, we’ll have it in days or we’ll tell you that honestly before you spend a dollar.
Common Gate Repair Problems We See in Conyers Homes
- Red clay post heave. Conyers sits on Georgia’s Piedmont clay, which swells every time it rains hard and shrinks when it dries out. Over a few seasons, this quietly pushes gate posts out of plumb. A gate that scraped the ground in August may bind at the strike in October. If your opener’s motor is wearing out every two or three years, the post is usually the root cause, not the motor.
- Operators undersized for wide farm gates. A 16-foot tubular-steel farm gate weighs several hundred pounds and catches wind like a sail. Residential operators strip rack-and-pinion gears or snap hinge welds trying to move them. We see this constantly on acreage south of SR-138. The gate needs a heavy-duty or industrial actuator, and if someone sold you a residential one, it was never going to last.
- Aging HOA ornamental iron. Subdivisions built in the 1990s and 2000s, especially around 30012 and 30013, have thousands of ornamental iron driveway gates hitting 15 to 25 years old. The decorative gate itself is usually fine. The actuator is tired, the control board is corroding, or the hinges have worn egg-shaped. Replacing those specific parts, on site, restores the gate for another decade. Replacing the whole gate would waste your money.
- Loop detector problems around horse traffic. Around the Georgia International Horse Park corridor, gates get cycled by trucks, trailers, and horses constantly. A loop detector that works fine at a suburban driveway can get confused by a horse standing on it or a trailer parked half-over the loop. We place and tune loops for the actual traffic pattern, not the default setting.
Pricing for Gate Repair in Conyers, GA
Gate repair in Conyers has honest, predictable price ranges. A hinge and post reset on a standard suburban gate typically runs $350-$700, depending on post size and how much concrete has to come out. A full gate realignment with hinge replacement runs $250-$500. Electric gate repair, like a failed control board or actuator swap on a Viking or DoorKing system, runs $400-$900 including the part in most cases. Heavy farm gate post resets on acreage, especially where agricultural-grade steel and deeper footings are required, start at $600 and go up with the gate’s span and the post’s condition.
What changes the price: gate width, post diameter, whether the footing has to be re-poured, and whether the operator needs replacement versus repair. What doesn’t change: the price we quote before we start is the price you pay when we’re done. No trip charge inside the county. $40 off any repair over $200. Free estimates on every job.
We Also Serve Cities Near Conyers
Our Gate Repair crews work throughout the east metro. If you’re in Stonecrest, Redan, Snellville, or Stockbridge, you’re inside our service area and the same rules apply: live person on the line, free estimate, 90-Day Done Right Promise in writing. Same team, same standards, same name on the shop.
Serving Conyers, GA - Our Local Coverage Area
We’re based in the Conyers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Conyers
Conyers sits on red clay Piedmont soil that expands when wet and shrinks when dry. That cycle physically lifts and tilts gate posts over years, which is why binding, sagging, and opener burnout are more common here than in sandier counties. We reset posts with deeper footings and proper drainage to ride out the next wet-dry cycle. If your gate’s been binding at the strike, call (877) 610-2993 for a free estimate before the opener burns out too.
Only if it’s sized correctly. A 16-foot or wider farm gate needs a heavy-duty or industrial actuator with enough torque, plus a solar array and battery bank that can handle the daily duty cycle. A residential solar opener will strip gears in months. We spec the right equipment for the gate’s span, weight, and wind exposure, and we’re happy to quote it honestly. Call (877) 610-2993 and we’ll come measure it for free.
Yes. Wrought-iron driveway gates built in the 1990s and 2000s around neighborhoods like Honey Creek and Ellington are some of the most common repairs on our board. The ironwork is usually repairable; what fails is the actuator, control board, hinges, or safety edges. We replace the failed part and weld or straighten what’s loose, right in the driveway. You don’t need a new gate. You need someone who’ll fix the one you have.
Horses and trailers confuse standard loop detector placements. A horse standing on the loop, a trailer parked across it, or a slow-moving rider can make a gate stall or refuse to close. We position and tune loops for mixed horse and vehicle traffic so the gate opens on approach and stays open safely until everything’s cleared. That’s a regular part of our work in the Horse Park corridor, and it’s not something a mail-order kit handles well.
A sagging farm gate almost always comes from a hinge post that’s no longer plumb, often after red clay heave on a post footing that wasn’t deep enough to begin with. We reset the post, re-weld the hinges, and re-align the gate leaf. In most cases the gate itself is reusable and doesn’t need replacing. We recently reset a 6-inch-diameter hinge post on a horse farm off SR-138 that clay had lifted and tilted; the existing Viking swing gate went back on, we replaced the loop detector, and horses cross without the gate stalling. It’s almost always fixable. Call (877) 610-2993 and we’ll come tell you honestly if it’s a repair or not.
Call Gatewood Fence & Gate for Gate Repair in Conyers
If your gate is acting up in Conyers, call (877) 610-2993 for a free estimate. You’ll talk to a live person, not a voicemail. Hal Gatewood’s crew will show up in the window we promised, fix the gate in place, and hand you a written price before any work starts. Every job’s covered by the 90-Day Done Right Promise. The name is on the shop, the shop is down the road, and the phone gets answered around the clock.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Conyers since the shop opened its doors in 2001.