Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Conyers
Gate motor and opener work in Conyers falls into two camps: 1990s ornamental driveway gates on brick-pillar HOA entries that are now 15 to 25 years old, and heavy farm gates on the equestrian acreage south and east of SR-138. Both fail differently, and both need a repair outfit that carries parts for nine brands and welds on site. We are that outfit. A live person answers at (877) 610-2993 around the clock, and same-day repair calls in Conyers are routine rather than a favor.
Here’s the honest economics: a control board rebuild on an old LiftMaster or DoorKing swings between $180 and $340, a new swing gate operator with install typically lands at $650 to $1,100, and a solar-powered linear motor for a 20-foot farm slide gate runs $900 to $1,600 depending on access and post condition. The price is quoted and agreed before any work starts. Not after.
Why Gatewood Fence & Gate Is Conyers’s Preferred Gate Motor & Opener Company
Hal Gatewood founded this shop in 2001 and still answers the phone himself most days. The name is on the shop, the license number is published, and the address is no secret. That matters in Conyers because gate work here is relationship work. You want the same person who replaced your control board last year to come back when the red clay shifts your post this year.
We show up in uniform, background-checked, and we fix the gate in your driveway rather than hauling it to a shop across the county. On-site welding is standard for us, not an upsell. If a hinge post needs a new bracket burned in, we burn it in while the gate hangs where it belongs. Every job carries the 90-Day Done Right Promise in writing. If it is not right, one call brings Hal back. No fine print.
From 30012 to 30094, we know the neighborhoods: Honey Creek, the Georgian brick fronts along Salem Road, the subdivisions off Sigman Road, the horse farm lanes down SR-138 toward the Georgia International Horse Park. We know what the clay does to these gates because we have dug enough of it out of hinge post holes to fill a swimming pool.
Our Gate Motor & Opener Services in Conyers
Motor Installation
A new gate motor in Conyers needs to be sized for the gate it is actually moving, not the gate somebody wishes they had. Ornamental iron swing gates with brick pillars take one kind of operator. A 20-foot tubular steel slide gate on a horse farm takes another. We quote them differently, install them on schedule, and set the force limits and travel stops before we leave. Free measure, written price, no surprises at the end.
Motor Repair
Most Conyers repair calls are not mystery failures. A hinge post heaves and the gate binds, the motor strains, the capacitor burns. Or the 2003 control board finally quits and the gate will not roll. We diagnose on site, replace only what is dead, and leave the working parts alone. Repair over replace is not a slogan here. It is the way Hal has run the shop for two decades. $40 off any repair over $200, and no trip charge inside the county.
Linear Motor
Linear motors are the workhorse for Conyers slide gates, especially out near the Horse Park corridor where openings are wide and the gates are heavy. We install and repair linear operators from our Gate Motor & Opener team on farm tracks and residential drives alike. Stripped gear racks, worn drive sprockets, limit switch failures – these are repairable on site in most cases, and we will tell you plainly if the rack itself needs replacing.
Slide Motor
Slide gates south and east of Conyers sit on posts that red clay likes to move. When a post tilts, the rack and pinion teeth shear or the gearbox strips. We reset the post first, then repair the motor. Skipping the post reset means you buy the same gearbox twice. We would rather do it once and leave you with a gate that rolls true for years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Conyers
We are certified on nine major gate brands, and for Conyers customers the ones that come up most are LiftMaster, Ghost Controls, DoorKing, and Viking. We keep common control boards, limit switches, and safety photocells stocked for those four, which means many Conyers repairs finish same-day without waiting on a part to ship. Older FAAC and BFT units we service routinely as well. If your gate operator is a brand we do not list, call anyway. We will tell you honestly whether it is worth fixing.
Common Gate Motor & Opener Problems We See in Conyers Homes
- Split posts and binding strikes after rain. Conyers sits on Georgia red clay. It swells when wet, shrinks when dry, and over a few seasons the hinge posts on ornamental gates drift out of plumb. The gate hangs heavy on the strike side, the opener strains, and eventually the motor burns. Fix the post and the motor together or you will fix the motor again.
- Dead photo-eyes and no entrapment protection on 1990s operators. Many HOA gates in Conyers were installed before modern UL 325 requirements became standard. The control boards work, but the safety eyes are dead or missing entirely. We retrofit them on the same visit. A gate that closes on its own is a liability, and we will show you exactly where yours is failing.
- Stripped rack and pinion teeth on farm slide gates. Horse farm gates along SR-138 and south get slammed by wind, cattle, and time. When a post footing tilts, the rack misaligns and the pinion grinds the teeth off. Agricultural-grade rack replacement and post resetting is a skill set most gate companies in metro Atlanta never develop. We do it regularly.
- Intermittent wireless keypad failures. The 1990s-era operators still running around Conyers predate modern wireless standards. We can add or integrate keypads, phone-based entry, and intercoms to those older systems without pulling out a working operator.
Pricing for Gate Motor & Opener in Conyers, GA
Here is honest money, straight from the Conyers market. A control board replacement runs $180 to $340 depending on the brand and board age. A swing gate operator install typically lands between $650 and $1,100. Slide gate linear operators run $900 to $1,600 with solar power integration adding $300 to $600 depending on exposure. Battery backup additions run $250 to $450. Intercom or keypad integration is $180 to $350. The exact price depends on what we find when we open the cover, but you will hear that number before any work begins and it will not change at the door. Free second opinion on any written estimate you already have. Veterans and seniors always get 10% off, no coupon needed.
We Also Serve Cities Near Conyers
Our crews run from Stonecrest through Redan down to Snellville and Stockbridge, so Conyers is central rather than the edge of our territory. A gate motor job in the Honey Creek subdivision or off Salem Road gets the same response speed as one across the county line. Call and a live person picks up.
Serving Conyers, GA - Our Local Coverage Area
We’re based in the Conyers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Conyers
Red clay under the hinge post swells when the ground gets wet and pushes the post out of plumb. The gate then lands hard against the strike instead of seating cleanly. The long-term fix is resetting the post in new concrete below the expansion zone, not just adjusting the travel stops. Call (877) 610-2993 and we will inspect the post before quoting anything.
Yes. Most LiftMaster operators from the early 2000s can accept a battery backup kit as long as the control board is still functional. We wire the backup to the main board, test the switchover with the gate under load, and quote you the number before starting. $250 to $450 covers most Honey Creek installs.
Usually, yes. We cut out the stripped section of rack and weld in a matching replacement on site, then readjust the pinion alignment. If the post footing has shifted, we reset it at the same time. Repairing the rack without fixing the post just strips the new teeth. Call (877) 610-2993 for a free estimate.
We wire a modern entry system to the operator’s open-command terminals, the same ones the old hardwired keypad used. The operator itself stays in place. A standard keypad integration in Conyers runs $180 to $350 installed, and we program it with you standing at the gate so you see it work before we leave.
If your gate has no working photo-eyes or the operator cannot reverse on contact, yes. UL 325 compliance is not optional on a gate that can close on a child or a dog. We retrofit entrapment protection onto older operators in Conyers routinely, often for less than replacing the whole unit. Call (877) 610-2993 and we will tell you what yours has and what it is missing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Conyers since 2001.