"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
Nationwide Gate Repair
& Installation.
Fixed Fast, Priced Up Front.
A gate stuck open is a security problem and we treat it as one. A new gate or operator is surveyed and priced in writing before anything is ordered. Licensed, insured crews nationwide.
We answer around the clock
Expert Gate Repair and Installation Services
Every job on this list is handled by trained, background-checked technicians working to one national standard, priced upfront from a free estimate.
Electric and Automatic Gate Repair
Sagging hinges, jumped chains, dead control boards and electric gates that stop halfway. Repaired on site in most cases.
Learn More →
Free Gate Estimates
A technician tests the gate and the operator, then quotes the full repair or replacement before any work begins.
Learn More →
Gate Opener Replacement
Swing and slide operators sized to your gate weight and daily cycle count, with safety sensors set and tested.
Learn More →
Gate Installation
Custom iron, steel and wood gates measured, fabricated and hung square on footings that hold their line.
Learn More →Why Choose Gatewood?
The same four answers in every market we serve.
One Standard, Every Location
Every Gatewood team works to the same written standard, the same pricing practice, and the same checklist. The town changes; the job does not.
You Approve the Price First
A free estimate, itemized and in writing, before a tool comes out of the truck. No hourly meter, no discovering the real number at the end.
Licensed, Insured, Background-Checked
Uniformed technicians, licensed for the work in their own state, insured, and background-checked before they ever knock on a door.
Backed by a 90-Day Written Promise
If the work is not right, we come back and make it right. That is the whole promise, and it is on paper, not just on the website.
The Gatewood Way
The standard every Gatewood team is held to, on every job, in every town.
Local roots
an address in this county, not a call center three states away
On time
the window we give you is the window, and we call if it slips
Community first
we hire here, we buy here, we sponsor the team here
Accountable
the owner answers the phone and puts his name on the work
Loyal
we would rather keep you for twenty years than win one big ticket
Our Promise, In Writing
The Locally Verified delivered by Gatewood, a proud Locally company.
90-Day Written Promise“Hal Gatewood publishes his name, his address and his license number, and answers his own phone. Ninety days in writing on every fences and gates job, and one call brings him back.”
Read the full promise →Premium, Long-Lasting Gate Parts
The part decides how long the repair lasts. Here is what we fit, and what the cheap version costs you later.
Gate Operators
The operator is the motor that moves the gate. It absorbs every open and close, so its duty rating decides how many years you get out of it.
We install operators sized to the real weight of the gate and its daily cycle count, with a metal gear train, a soft start and stop, and a proper manual release.
An undersized residential operator on a heavy gate runs at its limit on every cycle. Plastic gear trains strip, the motor overheats, and the unit is finished in a couple of seasons.
Hinges
Hinges carry the entire weight of a swing gate. A gate that sags almost always has a hinge problem, not a gate problem.
We use heavy welded steel hinges with greasable bearings and adjustable posts, so the gate can be brought back to level later without cutting anything apart.
Light bolt-on hinges with a plain steel pin wear oval within a year or two. The gate drops on the latch side, drags on the driveway, and starts binding the operator.
Chains and Racks
A sliding gate is driven either by a chain or by a toothed rack. Either way, that part takes the shock on every start and every stop.
We fit galvanized heavy-pitch chain, or steel rack welded on a straight line and tensioned properly, so the load spreads across several teeth at once.
Thin unplated chain rusts and stretches until it jumps the sprocket, and plastic rack teeth shear off in cold weather and leave the gate stuck in the driveway.
Control Boards
The control board is the electronics that read your remote, your keypad and your safety sensors. It also takes the first hit in a power surge.
We install boards with a conformal coating and surge protection, mounted in a sealed weather-rated enclosure and properly grounded.
A bare board in a loose plastic box collects condensation and insects. One nearby strike or one wet week and the gate stops responding to anything at all.
Safety Photo Eyes
Photo eyes are the beam across the driveway that stops the gate when something is in the way. They are the difference between a nuisance and an accident.
We install sealed weather-rated photo eyes on solid brackets, aligned and tested, and wired so that a sensor fault stops the gate instead of being ignored.
Unsealed indoor-grade eyes on flimsy brackets drift out of alignment with the first bump, and the shortcut fix is to bypass the safety input so it stops tripping.
Doing It This Way Since 2001.
Hal builds gates in his own shop and you can drive there and look at it. He repairs what other companies want to replace, welds on site rather than taking your gate away for a fortnight, and gets genuinely annoyed on your behalf when he finds safety sensors somebody bypassed.
A real American surname that happens to contain the trade, which nobody planned and everybody remembers.
Current Offers
Bring these savings to your next appointment.
10% Off Your First Service Visit
Valid on your first completed service visit with us.
$40 Off Any Repair Over $200
Free Second Opinion on Any Written Estimate
No Trip Charge Inside Our Own County
Senior & Veteran 10% - Always
What Our Customers Say
Homeowners in every market we serve, in their own words.
Frequently Asked Questions
Everything you need to know about our gate repair services.
Tips & Resources
Gate Repair guides, maintenance tips, and straight answers from our experts.
How to Choose the Right Gate Repair Company in Los Angeles
How to Choose the Right Gate Repair Company in Los Angeles Choosing a gate repair company in Los Angeles starts with one...
Read More →Emergency Gate Repair Near Me: What Los Angeles Homeowners Should Do First
Emergency Gate Repair Near Me: What Los Angeles Homeowners Should Do First Your gate is stuck open at 11 p.m. and there’s...
Read More →Gate Repair Pricing Breakdown: What Los Angeles Homeowners Pay in 2026
Gate Repair Pricing Breakdown: What Los Angeles Homeowners Pay in 2026 Gate repair in Los Angeles runs most homeowners between $225 and...
Read More →Good Work Deserves a Good Place to Do It.
We are hiring technicians, apprentices, and office staff across the country. Real training, real tools, and a company that backs you the same way it backs the customer. If you take pride in doing the job right the first time, you will fit in here.
View All Open PositionsOwn a Gatewood Franchise.
Protected territories, real training, national brand backing, and systems that are already working in towns like yours. Territories are open now.