Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bartlett
If your driveway gate in Bartlett won’t open, sags at the hinge post, or scrapes the concrete every time the operator kicks on, we can usually have it fixed the same day. Most Bartlett gate repairs run $180-$450, and we quote the full price before any work starts - not an estimate that floats after we step onto the property. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and the crews we send into Bartlett neighborhoods like the ones off Stage Road, Altruria, and Yale Road know these gates. Call (877) 610-2993 and a live person answers. Not a voicemail, not a recording, not a call center. That matters when your gate is stuck open at night.
Why Gatewood Fence & Gate Is Bartlett’s Preferred Gate Repair Company
Bartlett is a particular kind of town for gate work. The housing stock off Kirby Whitten Parkway and Altruria Road was built in a rush between roughly 1972 and 1998, and a lot of those homes went in with ornamental iron driveway gates as original upgrade features. That means we spend a lot of time looking at gates that are 25 to 45 years old, with hinge posts set in shallow footings and operators that were installed when the first Bush was in office. We know what fails on those gates before we even pull up the driveway.
Our Gate Repair crews work all over Bartlett, from the brick ranch subdivisions near Ellendale to the newer cul-de-sac clusters off Highway 70. Dispatch and scheduling are coordinated from our Memphis office, and crews serve Bartlett locally. When you call, you get Hal or someone on his crew who actually knows the difference between a Viking operator and a Ghost Controls board failure. We’re licensed and insured, background-checked, uniformed, and the 90-Day Done Right Promise is written on every invoice in plain English. If it’s not right, one call brings us back.
What actually earns trust in a town like Bartlett is the simplest stuff. We show up in the window we promised. We weld the bracket instead of convincing you to buy a whole new gate. And we fix the hinge post first, because we know a gate drags at the post, not in the middle.
Our Gate Repair Services in Bartlett
Electric Gate Repair
Bartlett’s humid summers are rough on gate electronics. Condensation seeps into control boards, corrodes the relay contacts inside operators, and fries the loop detector circuit that tells the gate when a car is waiting. We service LiftMaster, Linear, Viking, Ghost Controls, and DoorKing operators, and we keep common boards, limit switches, and capacitor kits on the truck so most electrical repairs happen in one trip. If your Bartlett gate opener hums but won’t move, or the keypad stopped taking your code, that’s usually a board-level fix, not a replacement.
Automatic Gate Repair
An automatic gate in Bartlett deals with hard duty: heat, deer, delivery trucks, school traffic, and the occasional teenager who doesn’t wait for the arm to clear. Automatic gate repair for us means checking the whole train - operator, safety photocells, edge sensors, receiver, and the mechanical hinges - not just replacing the part that’s blinking. On gates off Bartlett Boulevard with older swing operators, we frequently find the safety sensor mounts have drifted out of alignment. That causes the gate to stop midway and reverse for no reason, which is a service call we can usually clear in under an hour.
Hinge & Post Repair
This is the repair that saves Bartlett homeowners from a $4,000 gate replacement. Shelby County’s expansive clay soils swell in wet winters and shrink in dry summers, which heaves 1980s-era hinge posts that were never set in deep concrete. A gate that drags or won’t latch usually has a post that has moved half an inch out of plumb - not a gate that’s suddenly bent. We dig out the post, pour a new deep-set footing, weld rust-pitted hinge brackets on site, and stand the gate back true. The repair is done in your driveway. We don’t haul anything off.
Gate Realignment
A sagging gate in Bartlett is a geometry problem, not a mystery. When the hinge side drops, the latch side dips and the gate catches on the driveway apron or the brick column. We realign by correcting the post, shimming and welding the hinges, and adjusting the operator’s travel limits so the gate closes fully without slamming. On shared driveways off Altruria Road and Appling Road, where a swing gate has to clear a neighbor’s fence or a parked car, realignment often means resetting the arc of travel by a few degrees - sometimes that’s all it takes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bartlett
We’re certified to service nine gate brands, and the ones we see most often in Bartlett’s subdivisions are Linear, Viking, Ghost Controls, and DoorKing. Ghost Controls units are popular on the lighter ornamental gates from the 1990s, while DoorKing and Viking show up on the heavier slide gates and commercial-style entries. We stock common replacement parts for these brands locally, so Bartlett customers aren’t waiting on a part to ship from a warehouse two states away. A bad limit switch or a burned relay on a Linear board is a thirty-minute repair, not a week-long wait.
Common Gate Repair Problems We See in Bartlett Homes
- Heaved hinge posts. Expansive clay under Bartlett subdivisions heaves shallow 1980s footings out of plumb every wet-dry cycle. The post tilts, the gate drags, and the latch stops catching. Fixing the post usually fixes the sag. Patching the panel without the post means you fix it twice.
- Rusted ornamental iron at the base. Humid Bartlett summers push moisture into the powder coat, especially where the gate welds meet the bottom rail. We cut out the pitted section and weld in new stock on site, then re-coat to match. The gate stays in your driveway.
- Operator failure on 1990s units. Original operators from the Reagan-to-Clinton era are hitting end-of-life all across Bartlett. Internal corrosion seizes the motor, or the control board shorts after a power flicker. We repair what’s repairable and recommend replacement only when the repair won’t hold.
- Ice-storm arm and bracket damage. Winter ice events hit the Memphis metro more often than areas just 100 miles south. Ice-laden branches fall on gate arms and swing brackets in Bartlett subdivisions every January and February. The damage is usually mechanical - arms, brackets, hinge mounts - and we see a predictable spike in calls after each storm.
Pricing for Gate Repair in Bartlett, TN
What should a Bartlett homeowner budget? Hinge and post repair typically runs $350-$900 depending on how much concrete work the post needs and whether we’re welding new brackets. Gate realignment is usually $180-$400. Electric gate repair runs $180-$600 for board, sensor, and limit switch work. Automatic operator repair falls between $250-$750. A full operator replacement on a 1990s system can run $1,100-$2,400 including installation and safety sensor setup. These are real ranges for Bartlett’s market, not national averages. We quote the number before we start. That number is the number on the invoice. You also get $40 off any repair over $200, no trip charge inside Shelby County, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a straight price over the phone.
We Also Serve Cities Near Bartlett
Our Bartlett crews regularly run service calls into Germantown, Lakeland, Memphis, and Millington. If you’re just across the line in one of those areas, call the same number and we’ll get you scheduled. No extra charge for the drive inside the county.
Serving Bartlett, TN - Our Local Coverage Area
We’re based in the Bartlett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Bartlett
A gate sags at the hinge post because the post is what’s moving, not the gate panel. Bartlett’s subdivisions were built on Shelby County’s expansive clay, and posts set in the 1970s and 1980s without deep concrete footings heave out of plumb during wet-dry cycles. The fix is a new deep-set footing and sometimes a welded bracket, and it’s the most common repair we do in Bartlett. Call (877) 610-2993 if your gate is dragging - the longer it runs out of plumb, the more stress it puts on the hinges and the operator.
Yes, and on Bartlett’s tighter shared driveways off roads like Altruria, a slide gate with a rack and pinion drive is often the only way to keep a gate without eating a neighbor’s parking space. We survey the driveway, check for the room a slide track needs, and run the power and safety edges as part of the job. The price is written before any work starts. Call (877) 610-2993 and we’ll come measure it for free.
Most ice-storm damage we see in Bartlett is mechanical - bent arms, cracked brackets, broken hinge mounts - not necessarily a dead operator. After a storm we check the operator’s travel limits, the safety sensor alignment, and the board for moisture damage before recommending anything. If the operator is repairable, we repair it. If it’s not, we’ll quote a replacement and you decide. Call (877) 610-2993 for a post-storm inspection.
Usually, yes. On Bartlett subdivision gates, the safety photocells and edge sensors take abuse from heat, moisture, lawn equipment, and kids on bikes. When a sensor drifts out of alignment or its lens gets coated with pollen and dust, the operator reads it as an obstruction and reverses. We clean, realign, and test the full safety loop so the gate closes without false trips. This is a same-day fix in most Bartlett neighborhoods, and it runs $180-$300. Call (877) 610-2993 to get someone out.
In almost every case, yes. We cut out the rust-pitted sections at the base of the gate, weld in matching new stock on site, grind the welds smooth, and re-coat to match the existing finish. The gate never leaves your driveway. If the rust has eaten through the bottom rail in multiple places, we’ll show you that before we recommend a rebuild - no upsell, just straight talk. Call (877) 610-2993 and we’ll come look at it for free.
If you’re in Bartlett and your gate won’t move, won’t latch, or has been dragging for months and getting worse, call (877) 610-2993. Hal or someone on his crew will answer, ask the right questions, and give you a real number before we ever put the truck in drive. Free estimates. Published address. Written 90-Day Done Right Promise. The name is on the shop, and the shop is down the road - that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bartlett since the company was founded in 2001.