Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bartlett
Gate hinge sagging, a post leaning out of plumb, a weld cracked through from rust, an operator pulling the gate into the ground: in Bartlett we see these calls every week. If you live in Bartlett and your ornamental iron gate is failing at the hardware, you want a welder who shows up ready to fix it in the driveway, not a company hauling your gate away for two weeks. Gatewood Fence & Gate does on-site welding and parts replacement across Bartlett, and Hal Gatewood has been at it since 2001. Call (877) 610-2993 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Bartlett’s Preferred Gate Parts & Welding Company
Our Gate Parts & Welding crew works Bartlett subdivisions steadily, and the reason is simple: the housing stock here is unique. Bartlett brick ranches built from the 1970s through the 1990s came with ornamental iron gates that are now 25 to 45 years old. Hinges, posts, rail sections, rollers, and operators all reach the end of service life around the same window. One national outfit looks at that gate and quotes a full replacement. Hal looks at it and tells you what actually failed.
Bartlett customers call us because we have been Bartlett regulars for years. The reviews from homeowners off Stage Road, Yale Road, and Appling Road keep saying the same thing: the person who showed up was the person who answered the phone, the price on the invoice was the price agreed before work started, and the gate still swings right months later. We carry the 90-Day Done Right Promise in writing on every job. One call brings Hal back, no runaround.
Response time to Bartlett is usually same day for repair work, especially when a gate is stuck closed or hanging off a post. We keep our schedulers in the Memphis metro so nobody sits in a dispatch queue three states away. The person who picks up the phone knows what a Bartlett hinge post failure looks like.
Our Gate Parts & Welding Services in Bartlett
Hinge Replacement
Heavy iron gates hang on barrel hinges or strap hinges that wear thin after decades of heat and humidity. In Bartlett we replace original hinges on gates that predate the current owner, often because the hinge pin has ovaled out and the gate drags on the striker post. We cut the old hinge off, weld a new one in place, and re-hang the gate the same visit. If the old weld held for 30 years, that hinge did its job. The new one should outlast the post.
Post Replacement
Shelby County expansive clay is the root cause of most Bartlett gate post failures we see. Clay swells in wet winters and contracts through dry summers, and posts set in the 1980s without deep-poured concrete footings heave out of plumb. A gate sags in the hinge post, not in the middle, and that is where we start. We dig the old footing, set a new post with a deeper pour, and weld or bolt the gate back level. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Humid summers in Bartlett push moisture into ornamental iron rail sections, and rust pitting weakens the weld joints where rails meet stiles. Those cracks run under the paint until the bottom rail separates and the whole gate racks. We cut out the rotted section, weld in new matching rail stock, and grind the joint smooth. The repair is invisible under paint, and the gate stops twisting.
Custom Welding
Not every Bartlett gate problem is a simple replacement. Sometimes a hinge mount is rusted beyond reusing, or a gate needs a custom bracket for a new opener, or a homeowner wants a pedestrian insert welded into an existing driveway gate. Hal welds on site with a mobile rig, so the work happens in your driveway. No hauling, no week-long disappearances. If you can describe the gate and text a photo, we can usually give you a firm price before we roll the truck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bartlett
We service and stock parts for the gate operator brands Bartlett homeowners actually have: Viking, DoorKing, and Ghost Controls among them. A 1990s Viking operator on an original Bartlett gate is still repairable in most cases, and we’d rather rebuild the gear train than sell you an operator you don’t need. For older DoorKing and Elite swing operators, we keep common boards and limit switches on the truck so we don’t burn a second trip waiting on a part house. Bartlett weather destroys the outdoor components first, and we know which ones fail here.
Common Gate Parts & Welding Problems We See in Bartlett Homes
- Hinge post heave from expansive clay. Posts set without deep footings in the 1972-1998 construction boom shift every wet winter. The gate drags, the opener works harder, and the hinges bind until something gives. We dig and reset.
- Rust pitting at weld joints. Bartlett’s humid subtropical summers accelerate corrosion on ornamental iron. Weld seams fail first because the heat-affected zone is chemically weaker. We cut, patch, and re-weld before the rail drops.
- Ice storm damage to swing gate arms. January and February ice events in the Memphis metro snap branches onto gate arms and bend operators. Post-storm operator replacement is a predictable Bartlett seasonal call, and we plan for it.
- Slide gate derailment from wet winters. Shifted post footings push the rack and pinion out of alignment, and a gate that jumped the track will not just sit there. It blocks your driveway. We re-align the track, replace the rollers if they are shot, and set the gate back on line.
Pricing for Gate Parts & Welding in Bartlett, TN
A hinge replacement on a standard ornamental iron driveway gate in Bartlett typically runs $180 to $360, depending on hinge size and post condition. Post replacement with a new deep-poured footing runs $400 to $800, and that includes re-hanging the gate and welding the hinges. Rail repair and custom welding patches generally land between $150 and $450 depending on the length of rotted rail and how much grinding the joint needs. Gate roller replacement on a slide gate is $120 to $250 per set. Every price is quoted and agreed before any work starts, and $40 off any repair over $200 applies. No trip charge inside the county, and seniors and veterans always get 10% off. Call (877) 610-2993 for a free estimate, or text a photo and get a firm number.
We Also Serve Cities Near Bartlett
Our Bartlett crew also runs regular service through Germantown, Lakeland, Memphis, and Millington. The gate in your driveway works the same whether it was hung in 1982 or 2002, and so does the person standing in front of it. One call covers all of it: (877) 610-2993.
Serving Bartlett, TN - Our Local Coverage Area
We’re based in the Bartlett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bartlett
The hinge post is heaving in the clay. Bartlett’s expansive soil shifts between wet winters and dry summers, and a 30-year-old post without a deep footing moves a fraction of an inch every year. That fraction is enough to drop the gate leaf and make it drag. Tightening hinges only re-clamps the gate to a post that is still moving. We replace the post with a deeper pour and re-hang the gate. No fix that skips the post will hold. Call (877) 610-2993 and we’ll come look at the post first.
Yes. We cut out the rotted rail section, match the stock profile, weld the new piece in, and grind the joint clean. The gate stays in your driveway the whole time. Humid Bartlett summers rust the bottom rail and the weld seams first, and a patch done before the rail separates is a whole lot cheaper than a re-fabricated gate. Send a photo and we can usually price it before we roll out.
Yes. We install and service swing gate operators on existing iron gates throughout Bartlett, including older gates that were never automated. The gate needs to swing freely and hang square first, which means we check the hinges and posts before we mount the operator. If the post is soft from rust or heave, we address that before the operator goes on. Call (877) 610-2993 for a free measure and a written price.
The post footing has shifted in wet clay and pushed the rack out of alignment with the pinion. A slide gate works on a straight line, and when the track bows even slightly, the rollers walk off. Heavy rain does not cause the jump, it exposes the post movement that was already there. We re-align the track, check the rollers for flat spots, and reset any post that is still moving. Rain won’t fix it, but we can.
Yes. Rollers are wear parts, and Bartlett’s sand and clay grit works itself into the bearings faster than people expect. Most slide gates have the rollers replaced two or three times over the life of the gate. If the track is still straight and the posts are sound, there’s no reason to touch the gate panel. A roller set runs $120 to $250, and we keep common sizes on the truck.
If your gate is stuck, sagging, or dragging in Bartlett, call (877) 610-2993 now. A live person answers, the price is upfront, and the 90-Day Done Right Promise is on the invoice. Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That’s the whole warranty.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bartlett since 2001.