Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Memphis, TN
Gate repair in Memphis typically costs $250 to $720 for common fixes like hinge replacement, post resetting, and weld work, with most jobs done same day or next day. What makes Memphis different is the ground under the gate: Shelby County clay swells after every spring rain and shrinks in the August heat, heaving posts out of plumb all over town. The gate didn’t break. The ground moved. Call (877) 610-2993 and you’ll talk to someone who knows which one happened.
Why Memphis Homes Are Different
Memphis sits on expansive clay that behaves like a living thing. It drinks up the spring humidity, swells, and pushes gate posts sideways. Then summer bakes it dry and it shrinks, leaving the post leaning into a void. Any gate hung on a shallow footing will sag within a year here. That’s why we set posts in concrete collars below the active clay line, usually 36 to 42 inches deep. A post set 18 inches down is a temporary job, and we won’t sell you one of those.
The other constant in Memphis is moisture. The city’s humid subtropical climate, amplified by the Mississippi River, rusts exposed iron and steel faster than almost anywhere else in the South. Century-old wrought iron gates in Midtown are beautiful until the hinge pins snap from rust. And winter here means ice storms, not gentle snow. Freeze-thaw cycles crack the concrete around gate posts and seize the limit switches on automatic openers. Every one of these conditions shows up in our work weekly.
Gate Repair in Memphis
Most gate repair calls in Memphis come down to one of two things: a post that has migrated in the clay, or rust that has eaten through the hardware. In Midtown, where Victorian and Craftsman homes still have their original ornamental ironwork from the 1900s to the 1930s, nearly every swing-gate call involves a post that has drifted out of square. In Frayser and Whitehaven, the postwar gates are simpler, but the posts were set without adequate footings, so they lean and sag the same way. We fix the post first, then the gate. Fix the panel without the post and you’ll fix it twice.
We do our Gate Repair work on site, in your driveway. The gate doesn’t leave your property, and the welding happens right there. That’s the whole point of a repair-first shop: if the steel is sound enough to save, we save it. We service nine major gate brands, including Ghost Controls and DoorKing openers you’ll find on Memphis driveways.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. In Memphis, the post is usually moving because the clay underneath it is moving. A hinge and post reset in Memphis runs $380 to $720, depending on how far the post has shifted and whether we’re coring out old concrete. We dig out the old footing, set a new concrete collar below frost line, and re-hang the original gate with sag correction. The gate clears the driveway the day we leave and the year after.
Weld & Rust Repair
Weld and rust repair on ornamental iron gates typically lands between $250 and $600 per panel. Midtown’s century-old gates are the prime candidates: eighty years of Mississippi Valley humidity has its say on every hinge pin and bottom rail. We weld new steel into the rusted sections, re-pin the hinges, and match the original profile so the repair doesn’t look like a patch. When the steel is sound enough to save, we save it.
Electric Gate Repair
When an electric gate in Memphis stops mid-cycle, the opener is rarely the first thing we blame. Ice storms crack the concrete around slide tracks, stretch the chain, and knock limit switches out of adjustment. Humidity off the river corrodes circuit boards and wiring connections faster than inland cities see. Electric gate repair, including diagnosis and a new control board or limit switch, runs $180 to $490 for most Memphis homes. We diagnose what actually failed so you’re not paying for a motor you didn’t need.
Why can’t my gate stay closed in Memphis?
The latch misses because the post has moved, not because the latch broke. Shelby County clay swells every spring and shrinks every August, heaving posts out of plumb. Re-hanging the gate without resetting the post in a deeper concrete collar is a temporary fix. Call (877) 610-2993 and we’ll check the post depth before we touch the panel.
Do you repair old wrought iron gates in Midtown?
Yes, constantly. Homes built in Midtown from the 1900s to the 1930s still have their original wrought iron gates. The panels are often still solid; it’s the hinge posts that have rusted through at ground level. We cut out the rotted section, weld in new steel, and re-hang the original ironwork. Call (877) 610-2993 for a free estimate.
Gate Installation in Memphis
A new driveway gate in Memphis typically runs $1,800 to $6,500 installed, depending on gate type, material, and whether you’re adding an automatic opener. The Memphis-specific factor is always the soil: a gate post set shallow will tilt within one wet season. We dig footings below the active clay line and let the concrete cure before hanging anything. That’s the difference between a gate that works for twenty years and one that drags a crescent into your driveway by Christmas. For full details, see our Gate Installation page.
Driveway Gate Installation
We install driveway gates sized to your actual opening, not a boxed kit that sort of fits. A manual single swing gate runs $1,800 to $3,200. In Memphis, that often means working with driveways that slope toward the street or shift with the clay underneath. We set posts in concrete collars deep enough to resist seasonal movement, then hang the gate so it swings true the day we leave.
Sliding Gate Installation
Sliding gates are the right answer for many Memphis properties where a swing gate simply will not fit: shared driveways in Midtown, front yards with mature oaks, lots where a gate would swing into the street. A sliding gate, including track and operator, starts around $4,000 and can reach $7,500 for wider or heavier builds. We build slide gates on tracks set above the clay’s movement line, and we size the operator for the gate’s actual weight, not a guess.
Automatic Opener Addition
Adding an automatic opener to an existing gate runs $1,200 to $2,800 depending on brand and power requirements. Memphis has one of the highest residential burglary rates of any major US city, so homeowners in Midtown and older south Memphis neighborhoods retrofit ornamental iron gates with electric openers every week. We install operators with sealed limit switches so the freeze-thaw cycle doesn’t knock them out every winter.
How does Memphis clay affect a new gate installation?
It means footings have to go deeper and posts have to be larger. Set a post 18 inches deep in Memphis clay and it tilts within a year. We set hinge posts in 3-foot concrete collars below the active clay line. Call (877) 610-2993 and we’ll check your soil before quoting.
Do automatic gates in Memphis need entrapment protection?
Yes, every automatic gate operator in Memphis must have entrapment protection, including photocells and either a reversing edge or an inherent entrapment sensor. This is a UL 325 requirement, not a suggestion. We install and test entrapment protection on every automatic gate we put in. Call (877) 610-2993 with questions about your current gate.
Gate Motor & Opener in Memphis
Gate motor and opener work in Memphis usually runs $275 to $900 for repair and $1,400 to $4,800 for a full motor installation, depending on gate size, brand, and whether the existing posts are still square in the ground. The Memphis twist is this: a motor that struggles against a heaved post or a rusted bracket will burn itself out early. We check the post, the track, and the mounting hardware before we ever blame the motor. For full details, see our Gate Motor & Opener page.
Motor Repair
Most motor failures give you a warning before they die: the gate hesitates, hums, or has to be helped by hand. Motor repair in Memphis runs $275 to $600, including diagnosis and the typical part. Our calls in East Memphis and Whitehaven usually come down to limit switches knocked out of adjustment, circuit boards shorted by humidity, or capacitor failure from repeated cycle strain. We replace what failed, not the whole kit.
Motor Installation
A new gate motor install in Memphis starts with the post, not the opener. In neighborhoods like Midtown where wrought iron gates are 80 years old and the clay underneath moves every wet season, a brand new motor on a crooked post is a temporary fix. Full motor installation with new post or track work runs $1,400 to $4,800. Midtown ornamental gates with rotted posts land on the upper end. We measure, order the right operator for the gate’s weight and swing, and set posts in concrete collars built for Memphis soil.
Slide Motor
Slide motors in Memphis face two local enemies: clay that shifts the track and ice storms that bind rollers. Linear or slide motor replacement runs $800 to $1,900 installed, depending on horsepower and gear type. We reset track sections to grade and adjust roller height before we mount or repair the motor. Fixing the slide mechanism without checking the track is how you get to replace the same motor twice.
How fast can you get to my gate in Memphis?
Most Memphis neighborhoods see us the same day for emergencies, including Midtown, Whitehaven, Frayser, and East Memphis. Call (877) 610-2993, tell Hal what the gate is doing, and he’ll give you a straight window. A live person answers the phone around the clock.
What causes limit switches to fail in Memphis?
Ice storms, mostly. Memphis gets ice, not easy snow, and the repeated freeze-thaw cycles crack and seize the little mechanical switches that tell the opener where the gate is. The gate slams or refuses to close all the way. We replace them with sealed units. Call (877) 610-2993 for an exact quote.
Gate Access Control in Memphis
Gate access control in Memphis is a two-part job: the electronics that open the gate, and the ground that holds the gate post. Get either one wrong and you’ll be standing in the driveway at midnight wondering why the thing won’t close. A basic keypad replaced on an existing Memphis opener runs $250 to $450. Adding a standalone phone-entry system starts around $600 and can climb to $1,100 depending on the box and how far the phone line runs. For full details, see our Gate Access Control page.
Keypad Entry
A Memphis keypad has to survive heat, humidity, ice, and the occasional curious grandchild. The rubber membranes on cheap units dry out and crack after three summers here. Keypad replacement runs $250 to $450, including the part and the labor. More often than you’d think, the problem isn’t the keypad at all: it’s the buried wire from the keypad to the opener, corroded somewhere inside the conduit. We test the wire before we sell you a part.
Phone Entry Systems
Phone entry is the answer for a Memphis gate that has to let in delivery drivers, home health aides, or a teenager who loses every key ever made. This system ties the gate to a phone line or a cell signal: a visitor calls the gate’s number, the box calls your phone, you press a key, and the gate opens. Phone-entry installation starts around $600 and can climb to $1,100. On a rental property near the University of Memphis, it’s how a landlord avoids copying a gate code every time a tenant changes.
Card Readers
Card readers are the workhorse for Memphis commercial lots, churches, and apartment gates. A card reader install usually lands between $500 and $900. If the post is leaning, the card reader goes out of alignment, so we fix the post when we mount the reader, not two months later. That’s the advantage of a company that welds on site. We also stock replacement fobs and cards, so you don’t have to shut down access for a week waiting on supplies.
What does a full access control install include in Memphis?
A full install includes the new opener or control board, the keypad or reader of your choice, weather-sealed conduit to the post, and setup of remotes, codes, or cards. We handle the power run and safety edges. The price is written and agreed before we start. Call (877) 610-2993 for a free estimate.
Is gate access control in Memphis priced higher than nearby cities?
No. A keypad replacement in Memphis falls in the $250 to $450 range, in line with what we charge in Bartlett or Germantown. There’s no trip charge inside the county, so the cost is the same whether you’re off Poplar or further east. Call (877) 610-2993 for an exact quote.
Gate Parts & Welding in Memphis
Most gate parts in Memphis fail from rust or ground movement, not from manufacturing defects. That’s why we keep common wear parts stocked locally: hinge pins, latch assemblies, limit switches, control boards, and the brackets that hold it all together. When a Midtown wrought iron gate drops a panel because the hinge pin snapped, waiting a week for a part isn’t an option. We show up with what’s needed and weld it back together on site.
On-Site Welding
We weld in your driveway, not at some shop across town. A cracked post, a torn hinge, a sagging panel corner: we cut out the failed steel and weld in new material, then grind it smooth so the repair matches the original. For Memphis gates, the welding is often the difference between a repair that lasts and one that fails again in the spring when the clay moves. Weld repair on ornamental iron gates typically runs $250 to $600 per panel.
Parts Replacement
When a part is beyond saving, we replace it with something that matches. Hinge pins, latch bars, roller carriages, and gate wheels are all parts we stock for the brands most common in Memphis. We service Ghost Controls, DoorKing, and Elite openers daily, and we keep the common parts for those brands on the truck. For a deeper look, see our Gate Parts & Welding page.
Can you weld a gate in my driveway in Memphis?
Yes. We weld on site, in your driveway, so the gate never leaves your property. For a cracked panel or a snapped hinge pin in Midtown or Whitehaven, we can usually get the weld done the same day. Call (877) 610-2993 for a free estimate.
Do you stock parts for older gate brands in Memphis?
We keep common wear parts for the brands we service, including Elite and DoorKing openers. If a part isn’t on the truck, we can usually source it same week through our local suppliers. Call (877) 610-2993 and tell us what you’ve got.
Brands We Service in Memphis
We service Viking, Ghost Controls, and Elite openers on Memphis gates, with common parts stocked locally for faster turnaround. For the full list of brands we’re certified to work on, see our brands page.
Pricing for Gate Repair in Memphis, TN
| Service | Typical range in Memphis |
|---|---|
| Electric gate repair (diagnosis + part) | $180 - $490 |
| Hinge and post reset | $380 - $720 |
| Weld and rust repair per panel | $250 - $600 |
| Full automatic opener replacement | $1,200 - $2,800 |
| Keypad replacement | $250 - $450 |
| Phone entry system install | $600 - $1,100 |
| Card reader install | $500 - $900 |
| Manual single swing gate install | $1,800 - $3,200 |
| Sliding gate with track and operator | $4,000 - $7,500 |
| Motor repair | $275 - $600 |
What pushes the price up in Memphis is the dirt. If the post shifted, we’re digging. If the track cracked from an ice storm, we’re re-pouring. You get the price in writing before any work starts, and that number does not change at the door.
Neighborhoods We Serve in Memphis
We work throughout Memphis, with crews dispatched from our local shop. Typical response time for repairs in the Memphis area is same-day or next-day, depending on the season and the job.
- Midtown (38104, 38105) - century-old ornamental iron gates on heaving clay
- Cooper-Young (38104) - Craftsman bungalows with original swing gates
- East Memphis (38111, 38120) - wider driveways, double swing gates, and slide gates
- Frayser (38127) - postwar ranch homes with shallow gate post footings
- Whitehaven (38116) - tubular steel gates on expansive clay
Service Area - Cities Near Memphis
We serve Memphis, TN and the surrounding communities. If you’re in New South Memphis, TN, Germantown, TN, Bartlett, TN, Millington, TN, or Lakeland, TN, the same crew and the same pricing apply. No trip charge inside the county.
Serving Memphis, TN - Our Local Coverage Area
Gatewood Fence & Gate crews serve Memphis and the communities around it; dispatch is coordinated from our Memphis office. The map shows the Memphis coverage area; if your address is on it, we can help.
Also serving nearby: Memphis, TN, New South Memphis, TN, Germantown, TN, Bartlett, TN, Millington, TN, Lakeland, TN.
FAQs About Gate Repair in Memphis
Most Memphis neighborhoods see us the same day for emergency repairs, and next day for scheduled work. A live person answers the phone 24 hours a day. Call (877) 610-2993 and tell us what the gate is doing, and we’ll give you a straight window.
For most repairs, no permit is needed in Memphis. For new installations with substantial post work or electrical runs, we handle the paperwork and let you know up front if anything is required. Call (877) 610-2993 and we’ll tell you what applies to your property.
Yes. Every job carries the 90-Day Done Right Promise in writing. If the gate drifts out of alignment or the opener fails within 90 days, one call brings us back at no charge. Hal’s name is on the invoice, and the shop is down the road. Call (877) 610-2993 for a free estimate.
Call (877) 610-2993 and talk to Hal or someone on his crew who actually knows gates. You’ll get a straight answer about what’s wrong, what it’ll cost, and when we can be there. The price is quoted and agreed before any work starts, and the 90-Day Done Right Promise means the job is stamped in writing. If your gate is dragging, sagging, or refusing to open, call today. A live person answers, around the clock.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Memphis Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth