Gate Repair in Roanoke - Same-Day Repair, Priced Before We Start

Gate Repair in Roanoke, TX

Gate repair in Roanoke typically costs $180-$600 for most common fixes, and we usually have a crew on your street the same day you call. The gates out here fail in a particular way: the Blackland Prairie clay under your posts swells in spring, shrinks in summer, and gradually tips hinge posts until the leaf binds mid-swing. We’re Gatewood Fence & Gate, and we’ve been fixing gates since Hal Gatewood opened the shop in 2001. Call (877) 610-2993 and a live person picks up, day or night.

Call (877) 610-2993

Why Roanoke Homes Are Different

Roanoke sits at the heart of the Highway 114/170 Alliance corridor, one of the fastest-growing upscale residential build-outs in North Texas. The homes here, mostly built between 2000 and 2023, were designed with ornamental iron driveway gates as near-standard features. Those gates are still structurally sound, but the underlying North Texas expansive black clay soil hasn’t cooperated.

The clay swells dramatically during spring rains and cracks open during the prolonged 100°F summer dry spells. A single wet-dry cycle can move a gate post more than an inch. The leaf drifts out of alignment, the leading edge drags, and the operator trips its overload shutoff trying to force steel through the bind. Meanwhile, the original Linear, LiftMaster, and US Automatic hardware installed across entire subdivisions is reaching end-of-life simultaneously. Add in winter ice events that stress exposed operators and lock mechanisms, and you get a repair pattern that’s distinctly Roanoke: the gate looks broken, but it’s usually the post that moved.

We run calls throughout the newer subdivisions off Pearson Lane and Byron Nelson Parkway, through Fairway Ranch and Briarwyck, and into the established lots near the original town center. The crews know which streets catch the north wind and which gates bake in afternoon sun. That local knowledge changes what we pack in the truck.

Gate Repair in Roanoke

Gate repair in Roanoke usually comes down to one of two things: a post that has shifted, or wiring that was never installed to survive clay movement. The motor typically outlives the footing. That’s the pattern we see in 76262 and 76299 week after week, and it’s why we start by looking at the post and the conduit run, not swapping parts and hoping.

Our Gate Repair crews work the Roanoke area daily, carrying replacement parts for the brands you’re most likely to have and welding equipment for on-site structural fixes.

Electric Gate Repair

Roanoke’s newer subdivisions off Pearson Lane and Byron Nelson Parkway are full of electric gates installed when the house was built. The wiring was often pulled through undersized conduit or none at all, and once the black clay starts moving, that wiring chafes, shorts, or pulls loose at the operator. We trace the entire run, repair or replace damaged low-voltage wiring, and re-terminate connections so the gate stops tripping breakers or losing power intermittently. Single operator repair, including board, capacitor, or limit switch replacement, typically runs $220-$480.

Hinge & Post Repair

This is the repair Roanoke actually needs most. The Blackland Prairie clay under 76262 swells with spring rain and shrinks in summer heat. Gate posts cycle up and down an inch or more annually. Over a few years, the hinge post tips, the leaf binds, and the operator overloads or burns out a board trying to shove steel through the bind. We dig the post, set a new footing below the active clay zone with proper concrete, re-weld the hinge plate mount if the original weld is stressed, and re-hang the leaf. Full post reset and re-hang runs $600-$1,200, including concrete, weld time, and alignment.

Gate Realignment

A gate sags in the hinge post, not in the middle, and that’s where we start. We square the leaves, adjust or replace hinge barrels, align the receiver and drop rod, and re-teach operator limits so the gate closes fully and the lockset engages without slamming. In Roanoke, realignment is usually the final step after a post reset, but plenty of gates just need a good tune-up: tighten, shim, lubricate, and adjust. Hinge replacement or realignment typically runs $180-$350 depending on gate size and post condition.

Why does my Roanoke automatic gate keep shutting off mid-swing after a rainstorm?

The clay swells after heavy rain, your gate post heaves upward slightly, and that movement binds the leaf against the operator. The overload sensor sees resistance and shuts the motor down to protect itself. The fix is usually a post reset and hinge realignment, not a new motor. We see this exact failure pattern in 76262 throughout the spring. Call (877) 610-2993 and we’ll verify what’s moving before quoting a fix.

My gate isn’t rusted and the motor works - why does it sag and drag on the drive?

The hinge post has almost certainly tipped due to clay heave. A gate sags in the post, not the middle. Even a two- or three-degree lean throws the leaf out of square and makes it drag. We re-set the post footing and re-weld the hinge plate mount if needed, then re-hang the leaf. That solves the sag permanently. This is the most common structural call we handle in Roanoke. Call (877) 610-2993 for a free inspection.

Gate Installation in Roanoke

A new driveway gate in Roanoke typically runs $4,800-$14,500 installed, depending on width, weight, and whether it’s a single swing, dual swing, or sliding design. Most installations we schedule in the 76262 zip code take one to two days on site, with concrete work done a few days ahead of the steel. We walk the site with you, take measurements, and hand you a written price before anything gets ordered.

Our Gate Installation team beds posts deeper than code minimums in Roanoke’s expansive clay, because a post that shifts two degrees throws the leaf out of plane and the operator overloads.

Driveway Gate Installation

A driveway gate in Roanoke has to handle summer heat, winter ice, and the constant slow movement of expansive clay under the posts. We install single and dual swing driveway gates sized to your opening, with your choice of ornamental steel, and we set footings below the active clay zone so the gate doesn’t bind in its first spring. A typical driveway gate installation in Roanoke runs $5,500-$14,000, including the operator, safety edges, and two remotes.

Pedestrian Gate Installation

Pedestrian gates get overlooked in Roanoke. The big driveway gate is automated and the walk gate beside it is a flimsy afterthought that sags off its hinges within a season. We build pedestrian gates from the same steel as the driveway gate and hang them on posts set the same way. Most pedestrian gate installations run $1,800-$4,200, depending on height, width, and hardware.

Sliding Gate Installation

Sliding gates work well on Roanoke lots where the driveway slopes up from the street or where a swing gate would crowd the entry. They ride on a track or cantilever off the posts, which means the concrete pad and post footings have to be dead level and stable. For a 16-foot sliding gate with a FAAC or BFT operator, Roanoke homeowners can expect $7,000-$15,000 installed.

Why do so many automatic gate posts lean in Roanoke’s 76262 zip code?

Roanoke’s Blackland Prairie clay swells when it rains and shrinks when it dries, cycling gate posts up and down enough to tip them off plumb within a couple seasons. For a new install, the post footing has to go below the active clay zone, bedded in compacted crushed limestone, with a reinforced hinge plate mount. Anyone installing a gate in 76262 without accounting for clay movement is building a future repair call.

What’s the most common new-gate mistake we fix in Roanoke’s newer subdivisions?

A post set too shallow in clay soil, with a hinge plate welded light for the gate’s actual weight. The gate looks broken, but the motor is fine. We excavate the footing, bed it deeper, re-weld the hinge plate, and recalibrate the operator and safety photocells. Show me the gate closing on its own and I’ll show you where it’s failing. Call (877) 610-2993 for a free measure and written price.

Gate Motor & Opener in Roanoke

Gate motor and opener repair in Roanoke typically runs $220-$480 for most service calls, and a full motor replacement on a heavy ornamental swing gate lands between $850 and $1,900 depending on the operator and whether we’re welding on site. We serve the 76262 and 76299 zip codes and usually have a crew working the Pearson Lane and Byron Nelson Parkway corridors within the same day you call.

Our Gate Motor & Opener technicians carry replacement parts for nine major brands and test every protection circuit before leaving.

Motor Repair

Most motor failures on Roanoke gates aren’t actually motor failures. The Blackland Prairie clay under those posts swells in spring and shrinks in summer, and over a few years the hinge post tips two or three degrees. The gate binds mid-swing, the operator’s overload shutoff trips, and the homeowner assumes the motor is dead. We start with the posts and hinges, then test the motor. When we do find a genuinely failed motor, we’re certified on the brands you’re most likely to have. A basic service call and motor diagnosis runs $120-$200, trip included inside the county.

Motor Installation

When a motor does need replacing on a Roanoke property, we match the operator to the gate’s weight, leaf length, and how much wind that particular stretch of Denton County catches. A custom ornamental gate off Byron Nelson Parkway needs a different operator than a light tube gate in an older section of town. We install, set the limits, wire the safety photocells, and dial in the force settings so the gate closes fully without slamming. Full motor replacement on a heavy ornamental gate runs $850-$1,900, with the spread coming down to gate weight, operator brand, and whether the posts need realignment.

Slide Motor Repair

Slide gates have their own set of problems in Roanoke, and ice is a big one. Those hard winter freezes in the Denton/Tarrant County area stress exposed slide gate operators that were never weatherproofed for real cold. Stripped gears and burnt-out motors are common. We also see slide gates that jump the track because the concrete pad shifted with the same clay movement that tips the swing gate posts. A slide motor with a stripped gear usually runs $350-$650 to rebuild depending on the brand.

Why does my Roanoke swing gate bind mid-swing even though the motor sounds fine?

The hinge post has tipped two to three degrees from clay heave, and the gate leaf is binding against the top hinge. In Roanoke, the Blackland Prairie clay swells in spring and shrinks in the 100°F summer heat, cycling posts up and down over an inch a year. The motor sounds fine because it’s working against a moving post, not a dead board. The fix is post realignment and hinge adjustment, not a new operator. Call (877) 610-2993 and we’ll check the post before quoting any motor work.

What is the most common slide gate motor issue in the 76262 area?

Stripped gears and burnt motors from winter ice stress. The slide gate operators installed on 76262 properties often sit exposed to the weather, and when a hard freeze hits, the gear train binds and strips. The motor then burns out trying to move frozen gears. Combined with the concrete pad shifting from clay movement, it’s the most common slide gate failure we see. A weather-shielded operator and a properly bedded pad prevent it. Call (877) 610-2993 for an inspection.

Gate Access Control in Roanoke

Gate access control in Roanoke usually means one of three jobs: fixing a keypad or card reader that quit, adding automation to a gate that was installed manual, or replacing builder-grade equipment that was undersized from day one. In most Roanoke neighborhoods, the equipment wears out from the ground up, not from overuse. Our crews work the 76262 and 76299 zip codes weekly, and Hal Gatewood answers the phone himself around the clock at (877) 610-2993.

Our Gate Access Control installations include proper trenching through Roanoke’s tough clay, with conduit buried below the movement zone.

Keypad Entry

Keypads in Roanoke take punishment from sun and hard freezes, but the failure that brings most calls is simpler: the builder wired the keypad with shallow conduit through expansive clay, and the ground movement finally cracked the wire. A keypad that works intermittently after spring rains is almost always a wiring or post-alignment issue, not a failed keypad. We test the wire before we sell you a new keypad. A typical keypad replacement runs $180-$390 depending on whether it’s a basic code entry or a multi-user model.

Remote Control & Receiver

When a Roanoke homeowner’s remote stops working, we check the operator’s receiver first. Builder-grade receivers in 2000s-era homes off Pearson Lane are failing at the same time now, which is why three houses on the same street will all call within a month. Replacing a receiver or reprogramming remotes runs $120-$280. If the motor is fine but the receiver is dead, we don’t sell you a motor. We sell you a receiver.

Phone Entry Systems

Phone entry is the access control upgrade that makes the most sense for Roanoke homes with long driveways and service entrances. It lets a delivery driver or contractor call a number from the gate keypad and get buzzed in from your phone. The catch in Roanoke is the trenching. Most of these homes never had conduit run for phone entry, and cutting through Blackland Prairie clay is not the same as digging in sandy loam. We’ll quote the trenching honestly and bury the wire deeper than the clay’s movement. Phone entry with trenching typically runs $800-$1,600.

Do I need a loop detector for my driveway gate in Roanoke?

Yes, if you want the gate to open automatically when your vehicle pulls up and to hold open while the car is sitting on the loop. Loop detectors are wired into the operator’s control board and embedded in the driveway. On Roanoke properties with long driveways off Pearson Lane and Byron Nelson Parkway, we usually install two loops: one for approach and one for exit, so the gate doesn’t close on a vehicle. Call (877) 610-2993 to discuss loop placement for your layout.

Can you integrate my existing intercom and camera system with a new gate opener in Roanoke?

Yes, and we do this regularly on the newer custom builds around Roanoke where the original intercom and camera were installed with the gate. We wire the new operator’s control board into your existing intercom so the same button that talks to a visitor still opens the gate. We also tie in the camera trigger so the system records when the gate cycles. Call (877) 610-2993 to walk through your current setup.

Gate Parts & Welding in Roanoke

If your driveway gate in Roanoke has started dragging, sagging, or binding mid-swing, the culprit is usually not the motor. In this part of Denton County, we see the same thing week after week: the black clay soil under your gate post has shifted, the hinge plate weld has stressed, and your operator is now fighting a post that has tipped two or three degrees. That’s a fixable problem, not a replacement problem. Our Gate Parts & Welding crew welds on site so the gate stays in your driveway.

Hinge Replacement

When a gate sags, it sags at the hinge, not in the middle. In Roanoke’s clay soil, hinges bear the brunt of every seasonal shift. A gate post that heaves half an inch changes the load on the hinge plate, and a hinge that looked fine in March is suddenly grinding by August. We replace hinges with correct-weight plates for the gate leaf and weld them square, so the gate swings true again. Typical hinge replacement runs $220-$390 per gate depending on gate size and whether the post needs attention too.

Post Replacement

A bent or cracked gate post is a structural problem, not a cosmetic one. We cut the old post free, dig out the failed concrete footing, and set a new post with a deeper, heavier base. In Roanoke, where Blackland Prairie clay expands and shrinks with every dry summer and wet spring, the footing is the whole job. If you set a post in a shallow footing, you’ll do it again in two years. Post replacement typically runs $480-$850 including the concrete work and re-hanging the gate.

Custom Welding

Sometimes the gate has a problem that isn’t in a catalog. A custom arch, a busted decorative scroll, a section that never quite fit right from the start. We weld it on site, matching the original steel dimensions and paint-ready finish. We’ve seen plenty of Roanoke’s custom home gates with ornamental details an installer couldn’t get square the first time. Custom welding runs $95-$145 per hour plus materials, and you’ll get a clear number before we light the torch.

How much does gate post replacement cost in Roanoke?

Most post replacements in Roanoke run $480-$850, including digging out the old footing and pouring new concrete. The specific cost depends on the gate weight, whether it’s a single or dual swing, and how deep the original footing goes. Poor soil drainage or a post that’s been moving for several seasons can add time. Call (877) 610-2993 for a written quote. It’s free, and the number won’t change at the door.

What warranty comes with gate parts and welding work in Roanoke?

Every job carries the 90-Day Done Right Promise in writing. If the repair doesn’t hold, one call brings Hal back. No phone tree, no waiting a week. The promise is stamped on every invoice, not buried in fine print. Call (877) 610-2993 and we’ll put it in writing before we start.

Brands We Service in Roanoke

We carry parts and are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Roanoke’s common Linear and FAAC operators, we stock capacitors, control boards, and gear trains locally, which means most brand-specific repairs don’t wait on shipping. Turnaround on stocked parts is same-day or next-morning. See our full brands page for model details.

Pricing for Gate Repair in Roanoke, TX

Neighborhoods We Serve in Roanoke

We work in every part of Roanoke, from the established lots near the original town center to the newer master-planned sections still pushing outward. Crews are scheduled specifically for the 76262 and 76299 ZIP codes, which means same-day response for most repair calls across the city.

• Fairway Ranch
• Lakes of Roanoke
• Briarwyck
• Woodland Hills
• Villages of Roanoke

Service Area - Cities Near Roanoke

We run gate repair and installation crews throughout the Denton and Tarrant County corridor, with dispatch coordinated from our Dallas-Fort Worth office. If you’re near Roanoke, we also work regularly in Trophy Club, TX, Southlake, TX, Keller, TX, Lantana, TX, and Flower Mound, TX. Every job carries the same written quote, the same 90-Day Done Right Promise, and the same live-answer phone line at (877) 610-2993.

FAQs About Gate Repair in Roanoke