Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Roanoke
A gate motor that won’t open at 6:45 on a Tuesday morning doesn’t care about your schedule. In Roanoke, where ornamental iron driveway gates are practically standard on homes built after 2000, a dead opener means you’re either climbing out to swing a 400-pound gate by hand or you’re late. We fix it fast. Gatewood Fence & Gate has been owner-operated since 2001, and we answer the phone when you call: (877) 610-2993. Hal Gatewood’s name is on the shop and on every invoice. That’s the whole accountability model.
Here’s the thing most Roanoke homeowners don’t know until they’ve paid for it twice: the motor is usually not the real problem. The clay under your hinge post is. More on that below, because it changes everything about how a gate opener should be serviced in this town.
Why Gatewood Fence & Gate Is Roanoke’s Preferred Gate Motor & Opener Company
We have worked on gates in Roanoke long enough to know the rhythm of the place. Master-planned neighborhoods off Pearson Lane, estates along Byron Nelson Parkway, the custom builds over in Fairway Ranch, the smaller acreage properties out 1171. Each one has gates that fail in predictable ways. The clay heaves. The original installers used hardware that’s now hitting end-of-life. Homeowners call us because they’ve already replaced a motor once and it still won’t run clean.
Hal has been at this since 2001, and he still shows up to look at the gate himself. Reviews from Roanoke customers consistently mention the same thing: the person who answered the phone is the person who drove out, and the repair actually held. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings him back. No runaround, no fine print, no “well, technically.” It either works or we fix it.
A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail, not an automated queue. A person. That matters at 10:30 on a Saturday night when the gate won’t open and the cars are trapped in the driveway.
Our Gate Motor & Opener Services in Roanoke
We handle the full range of gate motor and opener work, but in Roanoke we lead with what this town actually needs. High-end iron gates demand precise installation. The clay demands recalibration. And Texas ice storms demand backup power. Here’s what that looks like.
Motor Installation
Installing a gate motor in Roanoke isn’t a bolt-and-go job. The Blackland Prairie clay under 76262 shifts seasonally, which means the post, the operator mount, and the gate leaf have to be aligned with that movement in mind. We install operators that can tolerate the soil cycle, set travel limits correctly the first time, and make sure the whole assembly runs quiet. If your gate is heavy ornamental iron, a new operator needs to be sized for the actual weight and swing of the leaf, not whatever was on the shelf. We get that right.
Motor Repair
We are a repair-first shop. Hal fixes the gate in your driveway rather than hauling it off or swapping parts that don’t need swapping. On Roanoke gates, motor repair often means diagnosing why the operator keeps tripping its overload shutoff. Sometimes it’s the control board. Sometimes it’s a gear that’s stripped from years of fighting a misaligned hinge post. We test the motor, isolate the real fault, and tell you honestly what needs replacing and what doesn’t. We weld on-site. That’s standard for us.
Linear Motor Service
Linear operators are all over Roanoke’s early-2000s subdivisions. They were installed by the hundreds when these neighborhoods went up, and now they’re reaching end-of-life at roughly the same time across entire streets. We service Linear gate motors specifically: arm replacements, travel limit recalibration, control board swaps, and full operator replacements when the original unit is beyond saving. We also stock the common Linear parts so we’re not waiting a week on a courier while your gate is propped open.
Slide Motor Service
On wider Roanoke properties, especially out along 1171 and in the custom-acreage builds, slide gates carry a lot of weight. A slide motor under daily load against a track that’s out of level will burn through chain drives and sprockets fast. We service slide motor systems, including track leveling, roller replacement, and operator repair or replacement. We carry slide operators sized for heavy iron gates, and we don’t guess at it. We measure the gate, measure the load, and install the right unit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Roanoke
We’re certified to service nine major gate brands, and in Roanoke we see a lot of Linear, LiftMaster, and FAAC on the original 2000s-era installs. We also work on BFT, Viking, and the rest. What that means for you: we have the diagnostic tools and the parts knowledge for the opener already bolted to your gate, not just for whatever brand we’d prefer to sell you. We stock common parts locally for Roanoke customers, which shortens turnaround significantly when a control board or a safety edge fails.
And if you’re replacing an end-of-life operator, we’ll recommend a brand based on your gate’s weight, swing direction, and exposure to the elements. Not based on a sales spiff.
Common Gate Motor & Opener Problems We See in Roanoke Homes
Roanoke throws specific problems at gate openers. Here are the ones we see week after week:
- The motor sounds fine but the gate shuts off halfway. Almost always, the hinge post has tipped 2-3 degrees from clay heave and the gate leaf is binding mid-swing. The operator’s overload shutoff trips because it’s working too hard, not because the motor is bad. We fix the post and recalibrate the travel limits.
- Whole neighborhoods hit with no-power gates at once. Roanoke subdivisions built between 2000 and 2010 used Linear, LiftMaster, and US Automatic operators. Those units are now reaching end-of-life simultaneously. If your neighbor’s gate just died, yours may be next. We see this pattern all across 76262.
- Ice events killing exposed operators. Winter storms in Denton and Tarrant County freeze gate operators and lock mechanisms that were never weatherproofed for a hard freeze. A battery backup keeps the gate running during an outage, but the operator itself still needs to be sealed and protected from ice stress.
- Weld failure at the hinge plate mount. The clay-heave cycle stresses the weld where the gate leaf attaches to the post. The weld eventually cracks, the post tips, and the gate starts binding. It looks like a motor problem but it’s a steel problem. We weld on-site to fix it properly.
Pricing for Gate Motor & Opener in Roanoke, TX
Here’s the straight answer, because you should know before you call. A gate motor repair in Roanoke typically runs $185 to $420, depending on whether it’s a component swap like a capacitor, limit switch, or control board, or a heavier repair like a gear replacement. A full motor installation runs $1,200 to $3,800, depending on the operator’s capacity, whether it’s a swing or slide application, and whether we’re adding battery backup or a keypad at the same time. Linear motor service falls in that same range. A slide motor replacement on a heavy custom gate can push toward the higher end because the operator itself is larger and the installation takes longer.
Any price we quote is agreed upon before work starts. Not an estimate we’ll “refine” at the door. The number Hal writes down is the number on the invoice. Estimates are free. We also offer $40 off any repair over $200, no trip charge inside Denton and Tarrant County lines, and a free second opinion on any written estimate you’ve gotten from another company. Seniors and veterans get 10% off, permanently.
We Also Serve Cities Near Roanoke
We serve Roanoke and the surrounding area out of the Dallas-Fort Worth metro, so a lot of our days are spent between Gate Motor & Opener in Roanoke, Trophy Club, Southlake, Keller, and Lantana. If you’re in one of those cities and your gate operator is failing, call us at (877) 610-2993 and ask for the soonest window.
Serving Roanoke, TX - Our Local Coverage Area
We’re based in the Roanoke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Roanoke
Your hinge post has most likely tipped 2-3 degrees from Blackland Prairie clay movement, and the gate leaf is binding mid-swing. The motor is working harder than it should, the operator’s overload shutoff trips, and the whole thing stops. The fix is post realignment and hinge recalibration, not a new motor. We see this constantly in Roanoke, especially on 2000s-era builds off Pearson Lane and Byron Nelson Parkway. Call (877) 610-2993 and Hal will set it straight.
Yes, you should have one. Roanoke gets ice events and hard freezes often enough that a power outage can leave your gate dead exactly when you need it to close. A battery backup keeps a swing or slide gate operating through an outage. We install battery backup on most gate motor replacements we do here because the alternative is a gate that stays open during a winter storm.
UL 325 is the safety standard for automated gate operators. It governs entrapment protection: photo eyes, safety edges, force settings, all of it. If your operator isn’t compliant, your gate can become genuinely dangerous, especially around kids and animals. We make sure every gate motor we install or repair in Roanoke meets UL 325 requirements. It’s a safety standard, not a suggestion.
The gate probably isn’t as straight as it looks. A hinge post tipped 2-3 degrees by clay heave can be hard to see from the curb, but the operator senses the binding and reverses to prevent damage. We find this all the time on ornamental iron gates in Roanoke’s newer subdivisions. The weld at the hinge plate mount gets stressed, the post shifts, and the gate fights the motor. We fix the root cause and recalibrate the travel limits.
In most cases, you can add a keypad to your existing operator without replacing the whole system. We do it regularly in Roanoke. If your current opener is an older Linear or LiftMaster unit that’s already struggling, there’s a point where adding accessories to a dying operator doesn’t make sense. We’ll tell you honestly whether a keypad is a simple add-on or whether it’s time to replace the operator. Call (877) 610-2993 and we’ll walk through it.
Call Gatewood Fence & Gate for Gate Motor & Opener in Roanoke
If your gate opener is grinding, reversing, dead, or just running rough, call us at (877) 610-2993. A live person answers around the clock. Tell us what’s happening, and we’ll schedule a time that works. The estimate is free, the price is agreed before we start, and the 90-Day Done Right Promise is in writing on every job. Hal Gatewood’s name is on the shop. That’s not a slogan; it’s how we’ve operated since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Roanoke since our founding in 2001.