Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Mountain View, CA
Gate repair in Mountain View runs anywhere from $180 for a simple hinge adjustment to $2,800 for a full operator replacement on a heavy residential swing gate, and most repair jobs are finished the same day we look at them. What makes Mountain View different from Sunnyvale or Los Altos is the split: south of Highway 101 you’ve got 1950s and 1960s ranch homes with wood gates that swell every winter fog season, while north of 101 the salt air off San Francisco Bay corrodes metal hardware and circuit boards in three to four years instead of the typical seven-plus. We know both sides of the freeway because we work both sides every week. Call (877) 610-2993 and a live person answers, day or night.
Why Mountain View Homes Are Different
Mountain View has quietly become two distinct service territories, and the gate work reflects that. South of Highway 101, the residential fabric is largely 1950s through 1970s ranch tract homes. The original wood side-yard and driveway gates on those properties swell with winter fog, rack against their strike posts seasonally, and the hinge posts, many set in undersized footings, have been slowly levering out of plumb for decades. A gate that sticks every December and swings free in June hasn’t broken. It was hung for a different climate, and it needs a hinge post reset, not a new panel.
North of 101 is a different animal. Properties along North Shoreline Boulevard and around the Googleplex sit close enough to San Francisco Bay that metal gate hardware, hinges, latches, and spring-loaded operators corrode measurably faster than anywhere else in the Santa Clara Valley. We regularly see gate operator circuit boards fail in three to four years instead of the typical seven-plus. That pattern is exactly why we tell every North Bayshore customer to use stainless fasteners and conformal-coated control boards from the start. It’s not an upsell. It’s what the salt air requires. Add in the townhome and condo complexes scattered across the city with HOA-contracted automatic gates, and you get a repair market that demands someone who actually knows the local conditions, not a generic gate company working from a script.
Gate Repair in Mountain View
Gate repair in Mountain View usually means one of two things: a sagging wood gate on a 1950s ranch south of US-101, or an automatic opener that quit on a townhome complex or North Bayshore campus. We handle both, and we come to your driveway with the parts and the welder already on the truck. Hal Gatewood has been fixing gates since 2001, and the person who shows up at your door answers to his name. For a deeper look at how we approach repair work, see our Gate Repair page.
Electric Gate Repair
Electric gates in Mountain View fail for predictable reasons. North of US-101, it’s salt air eating circuit boards. In HOA communities, it’s loop detectors knocked out of calibration when paving crews sealcoat the entry lane. We troubleshoot the whole system, not just the symptom: the operator, the photocells, the loop, the keypad, and every connection in between. Show me the gate closing on its own and I’ll show you where it’s failing. Basic electric gate troubleshooting and repair in Mountain View runs $180 to $380.
Automatic Gate Repair
Automatic gate systems are the most common call we get from Mountain View townhome and condo complexes. Operators on North Bayshore corporate campuses fail from hardened salt-air corrosion on the rack and pinion track, and the only real fix is stainless rail hardware and sealed electronics. On residential swing gates, the problem is usually mechanical before it’s electrical: a hinge post that moved, a leaf that sagged, a photocell beam that broke because the geometry shifted. We find the cause, not just the fault code. Circuit board replacement with a North Bayshore spec coated board runs $350 to $700.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start. On Mountain View’s older ranch homes, original redwood posts rot below grade or heave with winter moisture, and the gate racks and binds against the strike post. We dig out the old footing, set the post deeper, and re-hang the gate so it swings like it did in 1968. Fix the panel without the post and you’ll fix it twice. Hinge replacement on a single gate runs $275 to $450, and a full hinge post reset or replacement runs $500 to $900.
Gate Realignment
Seasonal fog and clay-heavy soil shifting mean gates in Mountain View drift out of true more than you’d expect. A gate that dragged last winter may bind this spring. We re-square swing gates, re-level slide gates, adjust hinges and latches, and reset operator limits so the opener isn’t fighting the frame. Realignment is part of half the repair jobs we do here. It’s not a separate upsell; it’s usually the actual fix. Gate realignment runs $150 to $275.
Do I need HOA architectural approval before repairing or replacing my gate in Mountain View?
Yes, in most Mountain View HOAs you need written approval before changing the style, height, finish, or operator type on any gate visible from the street or common area. Repairing existing hardware usually does not require approval, but replacing a wood gate with ornamental iron or adding an automatic opener usually does. We know the local requirements and can help you put together the spec sheet and drawings your management company expects.
Why does my gate operator fail so often if I live north of US-101 in Mountain View?
Salt air from San Francisco Bay corrodes circuit boards, connectors, and fasteners much faster than inland locations. Operators that last seven-plus years elsewhere routinely fail in three to four years in the 94043 ZIP and North Bayshore area. The fix is conformal-coated control boards, sealed enclosures, and stainless hardware. Call (877) 610-2993 and we’ll spec it right the first time.
Gate Installation in Mountain View
If you’re searching for gate installation in Mountain View, here’s the honest starting point: a new driveway gate in this city typically runs $2,800 to $7,500 installed, depending on material, width, and whether you’re adding automation. Most jobs land between $4,000 and $5,500. We’ve been cutting, welding, and hanging gates since 2001, and Hal Gatewood runs the crew himself. For more detail on how we approach new installs, see our Gate Installation page.
Driveway Gate Installation
A driveway gate in Mountain View has to do more than look right. On the older ranch properties south of Highway 101, the original gates were often chain-link or plain wood, fine for 1965, not fine when you’ve just spent $300,000 renovating the house. We install motorized ornamental iron and aluminum swing gates that match the new architecture, and we set the posts deep enough that the gate won’t sag into the strike post the first winter. Single swing gate installs run $2,800 to $5,500 in Mountain View.
Pedestrian Gate Installation
Pedestrian gates are the quiet workhorses of Mountain View side yards. We hang them on the 1950s and 1960s ranches off Miramonte Avenue and along the streets near Cuesta Park, where the original side-yard gates have been swelling and binding against posts for decades. A new steel-framed pedestrian gate with a proper closer can change how the whole side of the house feels, and it doesn’t have to cost four grand. Most pedestrian gate installs in Mountain View run $900 to $2,200.
Sliding Gate Installation
Sliding gates make sense on flatter lots where a swing gate would eat the whole driveway apron. We see this constantly in the 94043 corridor near North Bayshore, where commercial and residential lots sit close to Shoreline Amphitheatre and space is tight. A sliding gate needs a straight, level track run, so we pour the concrete track bed, set the rail, and hang the gate so it rolls quiet instead of grinding. Sliding gate installs in Mountain View typically land between $4,500 and $9,000.
Can you handle a gate for a condo complex or HOA in Mountain View?
Yes. We do HOA-contracted automatic-gate work throughout Mountain View, especially in the newer townhome and condo developments. That includes matching existing hardware, meeting board requirements for noise and hours, and providing documentation for the property manager. If your HOA needs a quote or a maintenance plan, call (877) 610-2993 and ask to speak with Hal directly.
Is gate installation more expensive in Mountain View than nearby cities?
Mountain View pricing runs close to the Peninsula average, though North Bayshore installs sometimes run 10 to 15 percent above a Sunnyvale job because of the stainless hardware and conformal-coated boards we specify for salt-air exposure. You’ll spend less on a basic side-yard gate than you would on a commercial-grade sliding gate near the Googleplex. For an exact quote on your project, call (877) 610-2993. Estimates are free.
Gate Motor & Opener in Mountain View
Gate motor and opener repair in Mountain View usually runs between $285 and $690 for most common failures, with full motor replacement or retrofit landing between $1,100 and $2,800 depending on the gate’s size, age, and whether we’re retrofitting an older system or starting fresh. We get to Mountain View homes and commercial properties the same day for motor failures that leave a gate stuck open or closed, because a dead opener leaves your driveway exposed. For more on how we handle opener work, see our Gate Motor & Opener page.
Motor Installation
A new gate motor installation in Mountain View typically runs $1,400 to $2,800 for a residential swing or slide gate. That includes the operator, mounting hardware, safety photocells, and a new or reinforced post footing where needed. We install on both sides of the freeway, and the North Bayshore jobs get stainless fasteners and conformal-coated control boards as standard because the salt air off the bay eats unprotected metals fast.
Motor Repair
Most gate motor repairs in Mountain View cost between $285 and $690 and are completed in a single visit. Common fixes include failed capacitors, stripped drive gears, bad limit switches, and water-damaged control boards. If we can fix it, we say so. If the motor is beyond saving, we’ll tell you that too, and give you a straight quote for replacement before any work starts.
Linear Motor
Linear gate motors, especially on sliding gates, are common throughout Mountain View because they handle heavy steel gates well and last through years of daily cycling. We service and install Linear operators and stock the common wear parts, limit switch assemblies, and chain drives so we’re not waiting a week on a part to get your gate moving again. Control board replacement for a Linear opener runs $240 to $520 depending on the model.
Slide Motor
Slide gate motors are a fixture at Mountain View apartment complexes, HOAs, and commercial lots along El Camino Real and the 94043 corridor near the Googleplex. When a slide motor fails, the gate usually won’t move at all, which means trucks can’t get in and security gets twitchy. We respond same day for slide motor failures at commercial properties, and we carry the parts to rebuild or replace most major-brand slide operators on the truck. Full motor replacement or retrofit runs $1,100 to $2,800.
Why does my gate opener circuit board on North Shoreline Boulevard keep failing every few years?
Because salt air off San Francisco Bay is corroding the board’s traces and connectors. Gate operator circuit boards in Mountain View’s North Bayshore area, especially along North Shoreline Boulevard and around the Googleplex, fail in three to four years instead of the typical seven-plus. The fix is a conformal-coated control board and stainless fasteners on every component that touches the bay air. Call (877) 610-2993 and ask us about the right board for your gate.
Our HOA has an old DoorKing slide gate operator that trips the loop detector when trucks enter. Can you retrofit it?
Yes, and this is one of the most common jobs we do at Mountain View apartment complexes and office lots. The loop detector’s sensitivity or frequency is usually out of tune for the gate’s metal mass, and a retrofit with a newer detector module solves it without replacing the entire DoorKing operator. We do these repairs same day for commercial clients because a gate that won’t open for delivery trucks becomes a problem fast.
Gate Access Control in Mountain View
When your gate opener stops responding to the keypad or your intercom goes silent, you want someone who knows exactly what’s failing in a Mountain View system. Gate access control here covers everything from simple keypad entry on a 1960s ranch home south of El Camino Real to full card-reader and video intercom setups at the corporate campuses hugging North Shoreline Boulevard. We diagnose the actual problem and fix it without telling you to replace what still works. For more on access systems, see our Gate Access Control page.
Keypad Entry
Keypad entry is the most common access system we repair in Mountain View’s older neighborhoods like Cuesta Park and Rex Manor. These ranch homes, many built in the 1950s and 1960s, often have add-on keypads wired to gate operators that were installed a decade later. Codes get forgotten, keypads get sun-baked and cracked, and wiring degrades. We replace keypad units, reprogram codes, and swap weathered conduit so the whole run stays clean. A typical keypad replacement in Mountain View runs $140 to $280 including programming.
Phone Entry
Phone entry systems are common at the townhome and condo complexes throughout Mountain View, where guests buzz a resident’s cell phone and get buzzed in. The phone modules fail, the relays wear out, and the cellular signal in dense housing can drop. We replace phone entry boards, reprogram the relay logic, and run new low-voltage wire when old runs have corroded. A phone entry system fix in Mountain View usually lands between $250 and $600.
Card Reader
Card readers show up more in Mountain View than in almost any neighboring city because of the corporate and HOA demand. Parking access, pedestrian gates at townhome clusters, and rear service gates at office buildings all rely on credential readers that can fail from salt-air corrosion or simple age. We service and replace card readers, add second readers where needed, and tie them into existing gate operator logic without ripping out what still works. Card reader replacement with programming typically runs $400 to $900.
Can you come out on an emergency when my gate won’t open at all?
Yes. A dead gate that’s blocking your driveway is an emergency, and we treat it that way. We answer the phone 24/7, and we’ll get someone to your Mountain View home as fast as the schedule allows. If the gate is stuck shut and you can’t get your car out, tell the person who answers and we’ll prioritize the call. Call (877) 610-2993.
Do you cover all of Mountain View, including the 94043 area near the Googleplex?
Yes. We cover ZIP codes 94035, 94039, 94040, and 94041, plus 94043 including the corporate campuses along Amphitheatre Parkway and North Shoreline Boulevard. North Shoreline is actually one of our most frequent access control service areas because of the salt-air corrosion effects on operator boards and card readers. Call (877) 610-2993 to confirm your neighborhood.
Gate Parts & Welding in Mountain View
Most gate failures in Mountain View come down to two things: the hinge post gave out, or the weld cracked where someone cut corners twenty years ago. Hal Gatewood has been fixing both since 2001, and he’ll tell you straight: a gate sags in the hinge post, not in the middle, and that is where we start. Whether you’re off North Shoreline Boulevard near the bay, in a 1960s ranch south of Highway 101, or managing a townhome complex gate, we bring the welder to your driveway. For more on what we fabricate, see our Gate Parts & Welding page.
Hinge Replacement
Salt air north of US-101 eats mild steel hinges fast. In the North Bayshore area, we regularly see hinge pins corroded and seized within three to four years, especially on gates facing the bay breeze. In Mountain View, we spec marine-grade stainless or powder-coated hinge hardware on any install near the bay because the standard hardware store hinge will not survive the coastal moisture. A hinge replacement in Mountain View typically runs $180 to $340 for a standard swing gate, including hardware and on-site welding if needed.
Post Replacement
This is the big one. A gate sags in the hinge post, not in the middle, and older Mountain View ranch gates are some of the worst offenders. The original posts on 1950s through 1970s tract homes south of Highway 101 were often set in undersized footings, and decades of winter fog swelling the gate panel has slowly levered those posts out of plumb. We pull the old post, pour a new footing, and weld a reinforced post back on. In Mountain View, a post replacement with new footing runs $450 to $900 depending on access and post size.
Rail Repair
When a wide gate sags, the top and bottom rails take the twist. On ranch-style swing gates on long Mountain View gravel driveways, we often find the bottom rail bent or cracked at the weld where it meets the hinge stile. Sometimes the fix is welding a gusset plate to reinforce the corner. Other times the rail needs straightening and re-welding. Figure on $150 to $400 for most rail repairs in Mountain View, less if we catch it before the post goes out of plumb.
Custom Welding
Not every gate repair fits a catalog part. When a mid-century ranch gate has an ornamental scroll broken off, or a townhome complex needs a custom strike post fabricated to match an existing gate, we weld it on site. Most small custom welds fall between $120 and $350. We quote the job after we see the gate, and the price is agreed before any work starts.
Can you repair the sag on my ranch gate without replacing the whole panel?
In most cases, yes. A sagging ranch gate in Mountain View is usually a hinge post problem, not a panel problem. We pull the gate, set a new post footing, weld a reinforced hinge post, and re-hang the panel. The panel itself typically only gets replaced if the rails are cracked beyond a safe weld or the wood is rotted through. Call (877) 610-2993 for a free estimate.
I have a long driveway without power at the gate. Can I still get an automatic opener?
You can. Solar gate openers have gotten good enough that running mains power down a long Mountain View driveway is no longer necessary. We install heavy-duty solar operators paired with keypad entry on acreage gates throughout 94040 and the eastern edges of the city. The solar panel and battery keep the gate cycling through fog and winter overcast, and we size the operator to the actual gate weight.
Brands We Service in Mountain View
We’re certified to service nine major gate brands, and in Mountain View we most often work on Linear, Viking, Ghost Controls, and DoorKing equipment. We stock common wear parts locally, so we’re not waiting a week on a limit switch or a control board. See our brands page for the full list and what we carry.
Pricing for Gate Repair in Mountain View, CA
| Service | Typical range in Mountain View |
|---|---|
| Gate realignment | $150-$275 |
| Hinge replacement (single gate) | $275-$450 |
| Hinge post reset or replacement | $500-$900 |
| Electric gate troubleshooting and basic repair | $180-$380 |
| Circuit board replacement (North Bayshore spec) | $350-$700 |
| Loop detector repair or relocation | $300-$550 |
| Full operator replacement (residential swing) | $1,200-$2,800 |
| Pedestrian gate installation | $900-$2,200 |
| Single swing driveway gate installation | $2,800-$5,500 |
| Motor repair (common failures) | $285-$690 |
| Keypad replacement | $140-$280 |
| Post replacement with new footing | $450-$900 |
What pushes a Mountain View job higher is usually location north of US-101, where stainless hardware and conformal-coated boards add $50 to $150 to parts cost, or a gate that’s been sagging long enough that the post, the rails, and the operator all need work at once. Whatever the number is, it’s quoted and agreed before we touch a single bolt, and it doesn’t change when the invoice comes.
Neighborhoods We Serve in Mountain View
We work across the full city, from the bayside streets of North Bayshore to the tree-lined blocks of Rex Manor and Waverly Park. Typical response time for a residential call in Mountain View is same-day or next morning, and you’ll get a person on the phone immediately with a time window we actually keep.
- Cuesta Park
- Blossom Valley
- Rex Manor
- Waverly Park
- North Bayshore
Service Area - Cities Near Mountain View
Along with Mountain View, CA, we serve the neighboring communities of Los Altos, CA, Los Altos Hills, CA, Sunnyvale, CA, Stanford, CA, and Palo Alto, CA. The conditions change fast between these cities, salt air near the bay, fog in the foothills, clay soil everywhere, and we plan every job for the microclimate that gate actually lives in.
Serving Mountain View, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Mountain View and the communities around it; dispatch is coordinated from our San Francisco Bay Area office. The map shows the Mountain View coverage area; if your address is on it, we can help.
Also serving nearby: Mountain View, CA, Los Altos, CA, Los Altos Hills, CA, Sunnyvale, CA, Stanford, CA, Palo Alto, CA.
FAQs About Gate Repair in Mountain View
For gate repair in Mountain View, we can usually get to you the same day you call, often within a few hours. We know the neighborhoods and the traffic patterns on El Camino Real and Shoreline Boulevard, and we schedule Mountain View jobs in tight windows so you’re not waiting around for four hours. Call (877) 610-2993 and we’ll tell you straight when we can be there.
Most gate repairs don’t require a permit, but replacing a gate post with a new concrete footing or adding an automatic opener may, depending on your property’s zoning and HOA rules. We’ll tell you if your job needs one and help with the paperwork where required. The price quoted is always the price you pay, agreed before work starts.
Yes, and we do it regularly. The corporate campuses near North Shoreline Boulevard and Amphitheatre Parkway run sophisticated vehicle-access and pedestrian gate systems, and we service the access control boards, loop detectors, credential readers, and slide operators on those properties. Same-day response for a gate that’s blocking a service entrance is standard, not an exception. Call (877) 610-2993.
If you’ve got a gate that’s sagging, sticking, or refusing to open in Mountain View, call (877) 610-2993 for a free estimate. A live person answers, and the quote you get is the price you’ll pay, in writing, before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mountain View Customers Say
"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim