Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Mountain View
Gate parts and welding in Mountain View usually means one of three jobs: a hinge that tore loose, a post that rotted at the base, or a rail that cracked where the operator pushes hardest. The fix starts with knowing why the metal failed here, and in Mountain View that reason is often the Bay itself. Salt air north of US-101 corrodes gate hardware faster than anywhere else in the Santa Clara Valley, so we weld and spec parts for that reality, not for a showroom. Call (877) 610-2993 and a live person answers, any hour, any day. Hal Gatewood has been at this since 2001, and his name is on every invoice we hand you.
Why Gatewood Fence & Gate Is Mountain View’s Preferred Gate Parts & Welding Company
Mountain View homeowners keep our number because we fix the gate in the driveway instead of hauling it to a shop forty minutes away. On-site welding means your gate never leaves your property. We bring the rig, the welder, the grinder, and the stainless stock, and we do the work where the gate hangs. It’s faster for you, and it means Hal or his crew sees the actual ground conditions, the slope, the post depth, and the way the gate moves before we cut anything.
Reputation here isn’t built on a billboard. It’s built in the 94040 and 94041 neighborhoods, where one neighbor watches our truck arrive and three more call before we pack up. Our Google reviews from Mountain View customers consistently mention the same two things: the price quoted on the phone matched the invoice, and the gate worked better after we touched it than it did when it was new. Hal stands behind that with a 90-Day Done Right Promise, stamped in writing on every job. If it isn’t right, one call brings him back. No runaround, no fine print.
We’re owner-operated, not a franchise. The shop publishes its address and license number, and anybody who wants to can drive over and look Hal in the eye. He has been fixing gates since 2001 and gets genuinely irritated when he finds sloppy work somebody else left behind. In a tech town like Mountain View, that’s the oldest accountability there is.
Our Gate Parts & Welding Services in Mountain View
Hinge Replacement
Gate hinges carry the entire weight of the panel, and in Mountain View they fight two enemies at once: gravity and salt. North of 101, standard galvanized hinges pit and seize within a few years, especially closer to North Shoreline Boulevard and the bay. We cut out the old hinge barrels, weld in marine-grade stainless replacements, and re-hang the gate so the reveal is even top to bottom. A sagging gate in the hinge post, not in the middle, and that is where we start. Most hinge replacement jobs on a standard residential driveway gate run $220 to $410 in Mountain View, including the weld prep and hardware.
Post Replacement
A gate post that rocks at the base is a structural failure waiting to drop the whole panel. South of Highway 101, the 1950s and 60s ranch homes often have original posts set in shallow concrete with no drainage. Winter fog seeps in, the steel rots underground, and the post leans. We saw it last spring on a ranch-style property near the 94041 side of town: a heavy ornamental iron swing gate had sagged until it dragged on the concrete. The post was rotten at the base from years of fog moisture. We cut it out, poured a new footing, welded a reinforced post in place, re-hung the gate with stainless hinges, and added a LiftMaster operator with a safety photocell and keypad for the long gravel driveway. Post replacement in Mountain View typically lands between $380 and $850, depending on depth, concrete removal, and whether the old post took the adjacent fence with it.
Rail Repair
Weld cracks on gate rails follow a pattern we see all over Mountain View: they start at the operator bracket, where the motor pushes against the panel, and they spread outward. On wide acreage gates at the city’s southern and eastern edges, under-spec residential operators overwork the rack and pinion until the rail fatigues. We grind out the crack, weld it back with proper penetration, and add a gusset plate so the stress moves off the original failure point. If the rail is beyond saving, we cut and sleeve a new section rather than convincing you to replace the whole gate. Expect $180 to $360 for a typical rail repair, more if the panel needs to be removed and braced for the weld to set true.
Custom Welding
Not every gate repair fits a catalog. Mountain View has a mix of original 1960s steel gates, custom ironwork on renovated ranch homes, and commercial vehicle gates on tech campuses. When something breaks and there is no replacement part, we fabricate it. Custom hinge barrels, bracket plates, latch strikes, stiffener ribs, operator pedestals. We cut, form, and weld on site, and we match the metal to the job: stainless near the bay, black iron with proper coating inland. Custom welding shop time generally runs $120 to $180 per hour, and most fabrication jobs finish in two to four hours. You get a written price before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mountain View
We are certified to service nine major gate brands, and in Mountain View three come up more than the rest: FAAC on European-style swing gates, BFT on many of the HOA and townhome complexes, and Linear on ranch properties and light commercial spaces. We keep common parts for these systems on the truck, so we are not welding a beautiful hinge while your operator sits dead waiting on a ground-shipped board. If you own a Viking or LiftMaster system, we carry those too. For Mountain View customers, the service call usually means we diagnose, quote, and repair in a single visit, because we stock the parts that actually fail here.
Common Gate Parts & Welding Problems We See in Mountain View Homes
- Salt-air corrosion on North Bayshore hardware. Operator circuit boards fail in three to four years instead of the typical seven-plus near Shoreline Boulevard and the Googleplex perimeter. Stainless fasteners and conformal-coated control boards are standard on any north-of-101 job we touch.
- Wood gate swelling on ranch-era properties. Winter fog and coastal moisture make original wood gates south of US-101 swell, rack, and bind against their strike posts every season. The fix is usually bracing and re-hanging, not replacing the gate.
- Oversized gates with undersized operators. Wide farm and acreage gates at Mountain View’s edges burn out residential operator motors or strip rack-and-pinion gears when heavy vehicles use them daily. We match the operator to the gate, not the other way around.
- Hinge failure from seized bearings. A gate that starts groaning when it moves is telling you a bearing is dry and about to lock. Catching it early saves the post and the panel; wait long enough and the hinge tears out of the wood or the weld pops off the post.
Pricing for Gate Parts & Welding in Mountain View, CA
Here are real numbers for Mountain View’s market, because you deserve to know before you call. Hinge replacements run $220 to $410. Post replacement: $380 to $850. Rail repair: $180 to $360. Custom welding shop time: $120 to $180 per hour. What shifts the price is post depth and concrete removal, how much of the old hardware is salvageable, and whether the job is north of 101 where we upgrade to stainless by default. Every quote is written, agreed, and signed before the first cut. We don’t change the number at the door. $40 off any repair over $200 and no trip charge inside the county apply to Mountain View jobs, plus our permanent 10% discount for seniors and veterans. If you have another company’s written estimate, bring it to us for a free second opinion. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Mountain View
Most of our Mountain View work comes from zip codes 94039, 94040, 94041, and 94042, but we regularly cross the city lines when a neighbor asks. We handle Gate Parts & Welding for properties in Los Altos, Los Altos Hills, Sunnyvale, and Stanford as well. If your gate is failing and you’re close enough to see the Bay from your driveway, you’re in our service area. Our full Mountain View service page covers the neighborhoods we know best, including the ranch tracts south of 101 and the North Bayshore corridor.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Mountain View
North of 101 sits closer to San Francisco Bay, where salt-laden air pushes inland and condenses on metal. Hinges pit and seize, welded steel rails bloom with rust, and operator circuit boards corrode at the solder points. This is why we default to marine-grade stainless and conformal-coated boards on any North Bayshore job, from North Shoreline Boulevard to the Googleplex perimeter. Sunnyvale and Los Altos sit farther from the bay and simply do not see the same failure rate. Still, the salt is only part of it; under-spec hardware takes care of the rest. Call (877) 610-2993 and we’ll tell you whether your gate needs corrosion-resistant parts now or later.
Yes, and we do it without pulling a trencher across your property. We size the operator to the gate’s true weight and daily cycle count, mount a solar panel and battery bank with enough reserve for the foggy weeks, and set up the keypad or vehicle wand so it actually works at the end of your driveway. For heavy gates we reinforce the hinge post and the rail before the operator goes on, because a solar motor still has to push the same panel. The gate is powered, but the mechanics still need to be right. Call (877) 610-2993 to talk through your gate’s span and what it weighs.
Usually, welding is part of the fix, not the whole fix. The wood swells from fog and coastal moisture, but the reason it binds is that the post shifted or the hinge side of the frame racked. We straighten the frame with welded steel corner braces, re-hang the hinges so the panel swings true, and set the strike post so the latch meets it cleanly even when the wood swells. You keep the wood gate, but the steel does the structural work. We have done this on ranch homes throughout the 94041 and 94040 areas, and the gates stop binding the same winter. Call (877) 610-2993 for a look at your gate before the next fog cycle.
Mountain View builds to California state code, which requires automatic gates to have an approved entrapment protection device, typically photo-eyes and a reversing mechanism. We test your system’s safety circuit during any gate parts and welding visit and we’ll tell you plainly if the sensors are positioned wrong, dirty, or bypassed. A gate that reverses on contact is the safety minimum. A gate that does not close on a child or a pet is a lawsuit waiting for an address. Call (877) 610-2993 and we’ll test the whole safety loop while we’re there.
No, it’s salt air. The bay side of Mountain View eats control boards because the coastal moisture settles into every unsealed connector and corrodes the traces. We replace the board and seal it with a conformal coating, upgrade the enclosure gasket, and switch fasteners to stainless. Gates we have treated this way along North Shoreline and the campus edges stop coming back every three years. If your HOA has replaced the board twice already, ask for a sealed board this time and watch the problem disappear. Call (877) 610-2993 and we’ll bring the right board and the coating.
Don’t Let a Small Gate Repair Turn Into a New Gate
The hinge is loose, the post is shifting, the rail is cracking. None of those are reasons to replace a gate. They’re reasons to weld, reinforce, and re-hang. Hal Gatewood will tell you the truth about what your gate needs, and if a repair won’t hold, he’ll tell you that too, and why, and what a replacement actually costs. No inflated quotes, no gate hauled off to a shop you’ll never see. Call (877) 610-2993 for a free estimate, or drive over to the shop and talk to us face to face. Hal has been fixing gates in the Bay Area since 2001, and he’ll give you his cell number without being asked.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mountain View with on-site welding and gate repair.