Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Mountain View
Gate access control in Mountain View usually means one of three things: a keypad that opens the driveway gate, a phone or card entry system on a condo or commercial lot, or a smart system you control from your phone. We repair and install all of them, and we stock parts locally so we’re not waiting on a distributor three states away. If your gate won’t open or the keypad stopped talking to the operator, call (877) 610-2993 and a live person answers. Not a voicemail. Not an answering service. Hal Gatewood has been at this since 2001, and the person who picks up the phone knows gates, not a script.
We work all over Mountain View: Monta Loma, Rex Manor, Waverly Park, Blossom Valley, and the North Bayshore corridor. The city has two very different gates, literally. South of US-101 you find 1950s and 1960s ranch homes with original swing gates that have been through decades of winter fog. North of 101 sits one of the densest collections of tech campuses in the country, including the Googleplex, where gates run on access control boards, loop detectors, and credential readers that get hammered by salt air off the Bay. We service both worlds, and that dual fluency matters here more than in Sunnyvale or Los Altos.
Key takeaways:
- We answer the phone 24/7 with a real person who knows gate systems.
- Every job carries a written 90-Day Done Right Promise: if it’s not right, we come back and make it right.
- Free estimates, no trip charge inside Santa Clara County, and the price is quoted and agreed before any work starts.
- We weld on site. Hal fixes the gate in your driveway rather than hauling it off or selling you a new one when a repair makes more sense.
Why Gatewood Fence & Gate Is Mountain View’s Preferred Gate Access Control Company
Mountain View homeowners can look us up. Hal Gatewood’s name is on the shop, the address is published, and the license number is there for anyone to check. That’s the oldest accountability there is. We’ve been locally owned and owner-operated since 2001, and Hal still shows up on jobs himself. Our Gate Access Control team has fixed keypads on Wyandotte Street, retrofitted phone entry on Shoreline Boulevard, and rebuilt operators on ranch gates near Cuesta Park. We know which boards fail in the North Bayshore fog and which hinges bind on 60-year-old posts south of El Camino.
Mountain View customers tell a consistent story: someone quoted one price on the phone, charged another at the door, and disappeared when the gate acted up again. We don’t work that way. The price you agree to is the price on the invoice. Every job gets the 90-Day Done Right Promise stamped in writing. One call brings Hal back, no runaround. And the response time to Mountain View is short because we’re already working in the city weekly. We’re not driving up from somewhere else; we’re already down the road.
Our crew is background-checked and uniformed. When the person shows up at your driveway, you know who they are and who they work for. Hal’s name is on the shop and the shop is down the road. That matters when you’re letting someone wire a keypad into your home’s entry system.
Our Gate Access Control Services in Mountain View
Keypad Entry
Keypad entry is the most common access control upgrade on Mountain View ranch homes. You get a numeric pad at the driveway that sends a signal to the gate operator, so nobody needs a remote clipped to the sun visor. We install keypads that survive direct sun and the kind of damp fog that settles in Monta Loma and Shoreline West. Most repairs take less than an hour, and we carry keypads for LiftMaster, DoorKing, and Linear in the truck.
Remote Control
If your remotes stopped working one by one, the problem is usually not the remote. It’s the receiver board or the operator’s logic board. We test the signal first, then replace what actually failed. Mountain View driveways are short, which means remotes live in cars that park closer to the salt air near the Bay, and we see receiver corrosion north of 101 more than anywhere else in the county.
Phone Entry
Phone entry systems are the standard on Mountain View townhome and condo complexes, especially along El Camino Real and in the newer developments west of Highway 85. A visitor looks up a directory code, the system calls the resident’s phone, and the resident presses a button to open the gate. We install and repair multi-resident phone entry for HOAs, and we handle the directory programming and backup offline mode so the gate still works during a cellular outage.
Card Reader
Card readers and fob systems show up on commercial lots all around the 94043 ZIP, from office parks off Shoreline Boulevard to the light-industrial blocks near Central Expressway. We wire card readers into existing operators, add standalone readers where no wiring exists, and troubleshoot the two failures that dominate commercial Mountain View: water intrusion at the reader face and loop detector misalignment at the vehicle exit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mountain View
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking, along with LiftMaster, DoorKing, Elite, Mighty Mule, and Ghost Controls. For Mountain View customers, that matters because we stock replacement boards and parts locally for the brands most common on mid-century ranch gates and commercial lots alike. A FAAC 400 operator on a Waverly Park driveway gets the same attention as a BFT board on a Shoreline Boulevard campus. Fast turnaround is the point: when your gate is dead, you don’t want to wait a week for a distributor to ship a part the technician could have had in the truck.
Common Gate Access Control Problems We See in Mountain View Homes
- Operator circuit boards dead from salt air. North of US-101, the fog off San Francisco Bay carries enough salt that control boards on gate operators last three to four years instead of the typical seven or more. The gate goes dark, the keypad lights up but nothing moves, and the fix is a conformal-coated board with stainless hardware. We spec those as standard now on any North Bayshore access control install.
- Worn hinge posts on 1950s and 1960s swing gates. The gate sags in the hinge post, not in the middle. When the post shears or the footing cracks, the gate racks, binds against the strike post, and trips the safety photocell. You fix the panel without the post and you’ll fix it twice. We weld and refoot posts in place.
- Keypad erosion and water intrusion. Mountain View’s winter fog wets keypad faces and seeps past worn gaskets. The buttons eventually stop registering, or the keypad sends a signal but the operator ignores it. We replace the keypad with a sealed unit rated for coastal damp, then reprogram the codes on site.
- HOA slide gates failing on loop detectors. Newer townhome complexes across the city have vehicle loop detectors that corrode or get knocked out of alignment by delivery trucks. The gate either reverses for no reason or ignores cars entirely. We test the loop, reset the sensitivity, and replace the loop wire when it’s beyond saving.
Honest Pricing for Gate Access Control in Mountain View, CA
Gate access control pricing in Mountain View typically falls into these ranges, and we give you the exact number before any work starts. A keypad entry install runs $340 to $680 depending on whether we’re adding it to an existing operator or pulling new low-voltage wire. A basic phone entry system for a single residence runs $550 to $900; multi-unit phone entry for an HOA starts around $1,500 and goes up with the number of directory codes. A card reader install is $400 to $800 for a single reader, with each additional reader about $250 to $450. If you’re retrofitting a 1960s ranch gate with a keypad and video intercom, budget $1,200 to $2,400 for the full package including the operator upgrade if needed. Smart access systems with phone control run $700 to $1,400 installed. Every quote is free, and the price is agreed before any work begins. You’ll also get $40 off any repair over $200, and seniors and veterans always get 10% off. Call (877) 610-2993 for an exact number.
We Also Serve Cities Near Mountain View
If you’re in Los Altos, Los Altos Hills, Sunnyvale, or Stanford, we work there too. The crews that handle Gate Access Control in Mountain View rotate through every one of those cities weekly, and the same live-answer phone number covers the whole area. Same pricing, same 90-Day Done Right Promise, same person answering at 2 a.m. when the gate won’t close.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Mountain View
Salt air. The North Bayshore sits close enough to San Francisco Bay that fog-borne salt corrodes circuit boards, terminals, and connectors at roughly twice the rate of more inland parts of the county. We spec conformal-coated control boards and stainless fasteners on any access control install north of US-101, and that typically doubles the board’s life. If your gate operator near Shoreline Boulevard or the Googleplex has died within three to four years, this is almost always the cause. Call (877) 610-2993 and Hal will tell you straight whether the board is worth saving.
In most Mountain View ranch homes south of US-101, retrofitting is the cheaper answer. A 1960s gate with a sound metal frame and hinge posts that haven’t cracked can take a new operator, keypad, and video intercom for $1,200 to $2,400. If the posts are rusted through or the frame is racking, replacement starts to make more sense. We’ll tell you which one applies and quote both options honestly. The estimate is free, and the price is agreed before work starts.
UL 325 is the federal standard, and it requires photo eyes or other external entrapment sensors, an internal reversing mechanism on the operator, and warning signage. The same rules apply in Mountain View as the rest of California. On older gates installed before these requirements existed, we add safety photocells and edge sensors as part of any retrofitted access control system. Not as an upsell. Because a gate that doesn’t reverse is a lawsuit and worse, a real danger to a kid or a dog.
Coastal moisture and winter fog swell the wood, and the gate racks when the hinge posts shift. A gate sags in the hinge post, not in the middle. The short answer: the wood expands and the post has already leaned a few degrees. We square the gate, reset the posts, and add hardware that resists seasonal movement. Fix the panel without the post and you’ll fix it twice. A typical post refoot in Mountain View with new hardware runs $350 to $650.
Commercial campuses in the 94043 ZIP run on access control boards, loop detectors, credential readers, and often a mix of pedestrian and vehicle gates on the same property. One gate ignored a car, another wouldn’t close, and the badge reader stopped talking to the server. We handle the full loop: test the detectors, flash or replace control boards, re-terminate the low-voltage wiring, and get the credential system talking again. Our team has repaired gates and operators along North Shoreline Boulevard and the Googleplex perimeter, and we carry commercial-grade stainless hardware as standard for that salt-air corridor. Call (877) 610-2993 for a free assessment.
Call Gatewood Fence & Gate for Gate Access Control in Mountain View
When your gate won’t open or the keypad stopped working, call (877) 610-2993. A live person answers, day or night. We’ll give you a free estimate over the phone or at your driveway, and the price is quoted and agreed before any work begins. Every job carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop. He’s been at this since 2001. If it’s not done right, one call brings him back. That’s the whole promise.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mountain View and the surrounding Bay Area since 2001.