Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Mountain View
Gate repair in Mountain View typically runs $185-$480 for most residential fixes, and if you’re in a 94040 or 94041 neighborhood we can usually have someone at your driveway the same day. We’re Gatewood Fence & Gate, and we’ve been repairing, welding, and realigning gates in the South Bay since 2001. Hal Gatewood started this shop, his name is on every invoice, and we answer the phone with a real person every time you call (877) 610-2993. That matters in a city like Mountain View, where a gate that won’t close at a rental property off El Camino or a broken keypad at a townhome complex off Shoreline isn’t a small thing; it’s a liability and a security problem that needs a fix before the next shift change or school pickup.
Why Gatewood Fence & Gate Is Mountain View’s Preferred Gate Repair Company
There is no shortage of gate companies that will quote a Mountain View job over the phone and send someone from two counties away. That is not how we work. Our crew is based in the Bay Area and serves Mountain View directly, which means the person who shows up knows the difference between a salt-air corrosion problem north of Highway 101 and a dry-rot problem in a 1950s ranch fence south of Cuesta Park. Hal has been fixing gates since 2001, and he still welds on site, in your driveway, rather than hauling the gate off and “seeing what he can do.” The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Our Mountain View customers keep us honest the old-fashioned way: they see us at the hardware store, they wave at the truck, and they call back when something else breaks. We earn that. Every job gets a 90-Day Done Right Promise, in writing. If it’s not right, one call brings Hal back, no runaround. We also do free second opinions on any written estimate, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. No trip charge inside the county. You will not haggle with us. The price we quote before we touch your gate is the price on the invoice when we leave.
Our Gate Repair Services in Mountain View
Most Mountain View gates fail for reasons that are predictable: salt air in the 94043 ZIP, fog-swollen wood frames in the ranch-home tracts south of US-101, and hinge posts that have been loose since the Clinton administration. Here is what we actually do about it.
Electric Gate Repair
Electric gate systems on Mountain View townhome and condo complexes need a technician who understands how a keypad, a safety photocell, and a control board talk to each other. When a single component fails, the whole gate stops, and the HOA starts getting angry phone calls. We troubleshoot the whole circuit, not just the part that looks broken. In the North Bayshore area, we routinely replace operator circuit boards with conformal-coated units and marine-grade stainless fasteners, because the bay air eats standard boards in three to four years instead of seven. That is a Mountain View-specific pattern we have seen too many times to ignore.
Automatic Gate Repair
Automatic gates fail in two ways: the motor gives out or the gate binds against the track, post, or strike. Both happen regularly in Mountain View. Motors on Viking and Ghost Controls units, which we see on a lot of renovated mid-century properties south of El Camino Real, often need a new capacitor or limit switch rather than a full motor replacement. That is the repair-first difference. On the residential side, automatic swing gates on 1950s ranch homes with original wood posts will rack out of plumb every winter when the fog rolls in. We fix the post, not just the panel. Fix the panel without the post and you will fix it twice.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. In Mountain View’s older ranch neighborhoods near Cuesta Park and Blossom Valley, we see a lot of hinge posts that were set in concrete 40 or 50 years ago and have now rotted or cracked at the base. Digging out that post, setting a new galvanized or stainless one in fresh concrete, and re-hanging the gate true is a full day’s work, but it is the only fix that lasts. We weld the hinge brackets on site. We do not use off-the-shelf strap hinges that will sag again by spring.
Gate Realignment
Wood gates on Mountain View ranch homes swell and bind seasonally. A gate that drags on the concrete in January may swing fine in August. The problem is rarely the gate leaf itself; it is usually the hinge post pulling out of plumb or the strike post shifting from repeated slamming. We pull the gate back into alignment at the hinges, not by shaving the bottom of the pickets. On a 1960s redwood gate, shaving an inch off the bottom is just vandalism with a saw. We also reset strike posts and add stronger catch hardware where the old latch has wallowed out the wood.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mountain View
We service and repair DoorKing, Linear, Viking, Ghost Controls, and most other major brands you will find on Mountain View properties. Because we do this work all over the city, we keep common parts for these systems in the truck: control boards, limit switches, safety photo eyes, keypads, and the odd capacitor. That means we can often finish a motor repair the same day instead of scheduling a second trip when a part arrives. Our Gate Repair team is certified on nine major brands, so you are not paying us to learn on your gate.
Common Gate Repair Problems We See in Mountain View Homes
- Salt-air circuit board failure in the 94043 ZIP. North Shoreline Boulevard and the Googleplex perimeter are close enough to the Bay that thin metal traces on operator boards corrode fast. We spec conformal-coated boards and stainless hardware as standard for any install north of US-101.
- Wood gates swelling on 1950s-1970s ranch homes south of US-101. Winter fog and coastal moisture cause redwood and cedar gates to rack and bind against the strike post. The real fix is resetting the hinge post plumb, not sanding the gate down every year.
- Shared entry system failures at townhome and condo complexes. When one keypad or safety photocell goes down, the entire resident access gate stops working. HOAs need a repair coordinated with the management company quickly, and that is work we do regularly across Mountain View.
- Loose or rusted hinge posts pulling out of plumb. On older properties near Cuesta Park and in the Miramonte tract, hinge posts set in shallow concrete footings rust at the base and lean. A leaning post stresses the gate, the hinges, and the operator motor until something fails completely.
Pricing for Gate Repair in Mountain View, CA
Here are honest ranges for what we charge in Mountain View. A basic hinge adjustment or latch repair runs $185-$260. Resetting a leaning hinge post with new concrete and welded brackets runs $350-$480. Electric gate troubleshooting, including a new control board, keypad, or safety photocell, runs $260-$450 depending on the brand. Full gate realignment on a wood ranch-home gate runs $220-$340. Automatic gate motor repair typically runs $280-$500. Commercial slide gate work at a tech campus or HOA, including loop detector reprogramming and stainless hardware upgrades, runs $450-$850 or more. The price is quoted and agreed before any work starts. Not an estimate range that balloons later. The number you hear is the number you pay. Call (877) 610-2993 for a free estimate on your gate.
We Also Serve Cities Near Mountain View
If you are in Los Altos, Los Altos Hills, Sunnyvale, or Stanford, we cover those too. A lot of our Mountain View customers own rental property nearby, and they call us when a gate fails at the tenant’s place. For more on our local coverage, see Gate Repair in Mountain View.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Mountain View
Yes, in nearly every Mountain View HOA, you need written architectural approval before changing the gate style, height, finish, or adding a motorized opener. Most CC&Rs in the ranch-home tracts south of US-101 and the newer townhome developments require a plan submittal, and some specifically restrict gate height to 6 feet and finish colors to match the existing fence. We can help coordinate that. Bring us the HOA’s architectural guidelines, and we will build and install a gate that matches what the board approved. Call (877) 610-2993 and we can walk through what your specific HOA will likely require.
Because the bay air at that end of Mountain View is salt-laden enough to corrode a standard circuit board in three to four years, whereas the same board inland might last seven or more. The fix is not another standard board; it’s a conformal-coated board and stainless fasteners so the next failure is much further out. We make that the default on any install or repair north of Highway 101. Our crew recently serviced a sliding gate at a tech campus off North Shoreline Boulevard where the control board had shorted from salt-air corrosion in under four years. We replaced it with a coated unit, upgraded all hinges and brackets to marine-grade stainless, and reprogrammed the loop detector and keypad entry so employee vehicles and visitors regained access without false stops. Call (877) 610-2993 if your gate opener is acting up near the Bay.
We coordinate with the management company and the HOA board, and we usually schedule the work during a low-traffic window if the gate must be taken offline. For a single keypad or safety photocell failure, we can often install the replacement part while the gate remains functional in manual mode, so residents are not locked out. For a bigger repair like a motor swap or a track realignment, we give the property manager a specific time window and a backup plan for resident access. The goal is always to restore full automatic operation the same day if parts are in the truck. Call (877) 610-2993 and we will work with your management company directly.
Almost always a post problem. The gate leaf itself does not grow or shrink enough to bind by two inches; the hinge post has pulled out of plumb, and the winter fog swells the wood just enough to close the gap. In Mountain View’s older ranch tracts, the original hinge posts were often set in shallow concrete that has cracked over the decades. We dig out the old post, set a galvanized or stainless replacement in a proper footing, re-hang the gate true, and you will not be sanding the bottom edge every January. Call (877) 610-2993 for a free look at the post.
Yes. We have done exactly that at corporate campuses along North Shoreline Boulevard and elsewhere in the 94043 ZIP. For a slide gate motor or control board replacement, we can often keep the gate in a fixed-open or manual position during business hours and complete the repair after peak arrival and departure windows. We also coordinate with the site facilities team on loop detector programming, badge reader integration, and emergency vehicle access. The typical commercial gate repair at a Mountain View campus runs $450-$850 or more depending on the system. Call (877) 610-2993 and we will schedule the work around your campus, not the other way around.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mountain View and the surrounding South Bay since 2001.