Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Mountain View
Gate motor and opener service in Mountain View typically runs $280-$650 for repair work and $1,200-$3,400 for full replacement with installation. Most jobs we handle are completed same-visit when parts are on the truck, and we stock the common boards, arms, and safety sensors for the brands most common in Mountain View. Hal Gatewood has been doing this since 2001. The name is on the shop, the address is published, and a live person answers the phone 24/7. Call (877) 610-2993 and you’ll get a straight answer, not a menu tree.
If you live in Mountain View, you already know the salt air near the bay does things to metal that inland neighbors never deal with. That matters for gate motors. We’ll get into the details below, but the short version is this: north of US-101, gate operator circuit boards fail in three to four years instead of the seven-plus you’d expect elsewhere. South of 101, the old ranch houses have hinge posts that gave up years ago. We fix both, and we don’t sell you a new gate when a weld and a new board would end the problem.
Key takeaways:
- Repairs in Mountain View usually run $280-$650; replacements run $1,200-$3,400 depending on gate size and operator type.
- We service all four Mountain View ZIP codes: 94035, 94039, 94040, and 94041, plus the 94043 area around Shoreline and the Googleplex.
- Battery backup retrofits are a growing share of Mountain View work, especially for HOAs that need gates to keep working during PG&E shutoffs.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back.
- No trip charge inside the county, $40 off any repair over $200, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Why Gatewood Fence & Gate Is Mountain View’s Preferred Gate Motor & Opener Company
Mountain View isn’t a place where you can fake local knowledge. The housing stock on one side of El Camino Real is seventy-year-old ranch tract, and on the other it’s HOA townhome complexes and tech campuses with access control that would confuse a national chain. We work both sides of the city every week. A gate sags in the hinge post, not in the middle, and that’s where we start.
We’re locally owned and owner-operated. Hal Gatewood’s name is on the shop and on every invoice. The person who shows up to your Mountain View home is background-checked, uniformed, and works for the owner, not a rotating subcontractor pool. If you want to see who you’re hiring, drive to the shop and look us in the eye. No call center, no dispatch queue, no “your call is important to us.” A live person answers every call, 24 hours a day.
Our Gate Motor & Opener work across Mountain View has earned us a strong local reputation, and much of it comes from the repair-first approach. Hal fixes the gate in your driveway rather than hauling it off or swapping parts that don’t need swapping. On-site welding is standard equipment on our truck. That’s not something most companies in Santa Clara County still do. It’s the difference between a $700 repair and a $4,000 replacement.
Our Gate Motor & Opener Services in Mountain View
Motor Installation
New gate motor installation across Mountain View typically runs $1,400-$3,400 depending on whether it’s a swing or slide gate, single or dual, and whether we’re running new conduit or tying into an existing power source. We install for the long term in this climate. That means marine-grade hardware and conformal-coated control boards on anything north of US-101. We quote the full price before any work starts, and that’s the price. No surprises at the door.
Motor Repair
Most motor repairs in Mountain View run $280-$650. The typical call is a gate that won’t open, a board that burned out, or an operator that grinds but doesn’t move the gate. On a 1960s ranch near Shoreline Boulevard in the 94043 ZIP, our tech replaced a LiftMaster LA400 swing gate operator whose control board had corroded after only three winters of bay fog. We welded a new steel hinge post with a stainless footing, installed conformal-coated boards, and reset the loop detector so the gate no longer false-triggered on coastal moisture. That’s the kind of repair that fixes the problem instead of the symptom.
Linear Motors
Linear gate motors are common on Mountain View slide gates, especially in the commercial strips along Shoreline and the office parks south of Central Expressway. Repair on a Linear motor in Mountain View typically runs $320-$680, and replacement with installation runs $1,500-$3,200. We carry Linear control boards and limit switch assemblies on the truck, which means most Linear repairs are done the same day we show up.
Slide Motors
Slide gate motors in Mountain View need more attention than swing operators because the track, rollers, and chain drive all take abuse from coastal moisture and debris. We service slide gate motors on residential estates in Los Altos Hills and commercial properties in Mountain View’s industrial districts. Repair work runs $350-$700 depending on what’s failed. We inspect the full chain of components, from the gearbox to the rollers to the safety edges, and we don’t leave a gate running if it doesn’t meet current UL 325 entrapment standards.
Intercom Integration
Older Mountain View HOAs and office parks still run intercom and keypad systems from the 1990s, and many of them have been patched so many times nobody remembers how they’re wired. We integrate new gate motors with existing intercom, keypad, and telephone entry systems, and we do it without tearing out what still works. Intercom integration on a Mountain View gate usually runs $350-$900 for the wiring, programming, and testing, depending on system age and complexity.
Battery Backup
Battery backup retrofits are becoming standard on Mountain View gate systems, particularly for HOA communities and the tech campuses where a dead gate means a dead entry lane. A battery backup install runs $450-$1,100 depending on the operator and whether we’re installing a new disconnect or a full solar-assist setup. It keeps the gate working during the PG&E outages that hit this part of Santa Clara County more often than most residents expect.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mountain View
We’re certified to service nine major gate brands, including Linear, Viking, Ghost Controls, DoorKing, and the rest of the common names you’ll find on Mountain View gates. We stock the boards, arms, safety sensors, and hardware for the brands we see most often in this city, which means we don’t have to order parts and make you wait a week for a gate you need moving today. If you have a Viking slide operator on a commercial property or a Ghost Controls swing opener on a renovated ranch in the 94040 ZIP, we can diagnose it and fix it on the first visit in most cases.
Common Gate Motor & Opener Problems We See in Mountain View Homes
- Corroded control boards in North Bayshore. Salt air off San Francisco Bay shortens gate operator circuit board life to three or four years around North Shoreline Boulevard and the Googleplex perimeter. We spec conformal-coated boards and stainless fasteners as standard here, not as an upsell.
- Sagging gates on 1950s-1970s ranch homes south of US-101. The original hinge posts on these properties were set in concrete that’s now cracked and shifting. The gate binds against the strike post, the motor strains, and the board overheats. Fix the post first, then the operator.
- Legacy operators without modern entrapment protection. Many older HOA townhome complexes in Mountain View still have operators that predate UL 325 photo-eyes and safety edges. These gates will keep running until the day they hurt someone. We retrofit them with proper safety sensors.
- Seasonal wood gate swelling and racking. Year-round coastal moisture and winter fog cause wood gates on the older ranch properties to swell, rack, and bind against strike posts every November through March. A gate that worked fine in September suddenly won’t close in February. We adjust, reinforce, and where needed, replace the gate with aluminum that won’t move with the weather.
Pricing for Gate Motor & Opener in Mountain View, CA
Here’s what we charge in Mountain View, straight up. Motor repair: $280-$650. Motor replacement with installation: $1,200-$3,400 depending on gate size, operator type, and whether we’re running new power or working with existing conduit. Battery backup retrofits: $450-$1,100. Intercom integration: $350-$900. The price is quoted and agreed in writing before any work starts. If the job grows, you approve the change first. We don’t do the bait-and-switch the national companies pull. Call (877) 610-2993 for a free estimate. It costs nothing to have us look at the gate and tell you what it actually needs.
One thing worth knowing about Mountain View specifically: if your gate is north of US-101, the corrosion math changes the repair-versus-replace calculation. A board that’s already failed once from salt air in three years is likely to fail again in another three. We’ll tell you when a repair is throwing good money after bad and when a replacement with coated boards and stainless hardware is the cheaper five-year answer.
We Also Serve Cities Near Mountain View
If you’re reading this from a neighboring town, you’re not outside our area. We service Los Altos, Los Altos Hills, Sunnyvale, and Stanford as well. The same crew, the same 90-Day Done Right Promise, and the same straight pricing. Whether you’re in Mountain View proper or just across the city line, when you call, you get Gate Motor & Opener in Mountain View service with a live person on the other end. Call (877) 610-2993.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Mountain View
Salt air and heavy bay fog create a corrosive environment that eats through standard circuit board coatings and hardware within three to four years, versus the seven-plus years you’d see inland. The areas around North Shoreline Boulevard and the Googleplex sit close enough to San Francisco Bay that the marine layer deposits salt residue directly onto gate electronics. We spec conformal-coated boards and stainless fasteners on every North Bayshore install, and we recommend them as an upgrade on repairs. Call (877) 610-2993 and we’ll tell you if your existing board is worth saving.
Yes, and it’s one of the most common jobs we do in Mountain View’s 94040, 94041, and 94301 ranch neighborhoods. The key is the hinge post. If the post is still solid, we can mount the new operator and photo-eyes directly. If it’s rusted or cracked, we weld in a new post with a stainless footing before we touch the motor. Retrofitting a swing gate operator with modern safety sensors on a Mountain View ranch home typically runs $1,400-$2,800 including the post work when needed. Call (877) 610-2993 for a free on-site look.
Two things: operators that predate UL 325 entrapment protection and control boards that have been running for fifteen years without service. The older HOAs in Mountain View, especially the complexes built in the 1970s and 1980s, often have original operators still in place. These gates fail because limit switches wear out, boards short, and safety edges that were never installed leave the gate running blind. We retrofit these systems with photo-eyes, safety edges, and new boards. The HOA usually pays $600-$1,200 per gate for a full safety retrofit. Call (877) 610-2993 and ask for Hal.
Yes. Solar gate openers are a good fit for Mountain View driveway gates where running power would mean trenching under concrete or landscaping, and the climate here gets enough sun most of the year to keep a solar-assist system charged. A solar gate opener install in Mountain View runs $1,800-$3,600 depending on the operator and battery bank. We size the panel and battery to the gate’s daily cycles, not to some generic chart. Call (877) 610-2993 and we’ll tell you if solar makes sense for your setup.
Fog and coastal moisture saturate the wood, causing it to swell and rack. The gate grows, the gap disappears, and it binds against the strike post. This happens every winter in Mountain View’s older ranch neighborhoods south of US-101. The permanent fix is to replace the wood gate with aluminum or ornamental iron, or to rebuild the frame with properly sealed hardwood. A temporary adjustment will get you through the season, but you’ll be calling again next November. We’ll give you an honest recommendation. Call (877) 610-2993 for a free estimate.
Call Gatewood Fence & Gate for Gate Motor & Opener in Mountain View
When you call (877) 610-2993, a live person answers. You’ll talk to Hal or someone who works directly for him. We’ll ask what the gate is doing, when it started, and where in Mountain View you are. Then we’ll show up in the window we promised, look at the gate, and tell you what it needs. The quote is free, it’s in writing, and it doesn’t change at the door. Whether you’re off Shoreline Boulevard, in a 1960s ranch near Cuesta Park, or managing an HOA complex in the 94043 ZIP, we know your gate and we know this city’s climate. That’s the whole advantage.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mountain View and the San Francisco Bay Area since 2001.