Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Conyers
Gate installation in Conyers means dealing with red clay, aging HOA hardware, and a lot of horse fences. If you’re off Salem Road or out toward the Georgia International Horse Park, you already know that. A new driveway gate here typically runs $2,800 to $7,500 installed, depending on whether we’re hanging a single swing gate on an existing brick pillar or building a sliding gate with new posts and an opener. We schedule most Conyers installations within 5 to 10 business days, and a live person answers when you call (877) 610-2993.
We’ve been doing this since 2001, and the name on the shop is Hal Gatewood. That matters when a crew shows up at your gate post. We’re the ones still welding on site in Conyers while other companies want to haul your gate off and sell you a new one. If you’re in 30012, 30013, or 30094, we’ll be the ones driving out to you.
Why Gatewood Fence & Gate Is Conyers’s Preferred Gate Installation Company
Conyers is a split market. Half our calls come from brick-pillar HOA subdivisions built in the 1990s and early 2000s, where the wrought-iron driveway gate has been opening and closing for twenty years and the control board finally quit. The other half come from horse properties south and east of SR-138 where a farm gate has to hold up to livestock, hay trailers, and Georgia weather. Most gate companies handle one or the other. We handle both because we’ve been doing it here long enough to know both kinds of jobs cold.
Hal has been at this since 2001, and our Gate Installation team is the same crew that does our repair work. So when we install a gate in Conyers, we’re the ones who’ll be back if anything ever shifts out of alignment. The 90-Day Done Right Promise is in writing on every job. Not “up to” 90 days. Ninety days, one call, we come back.
We answer the phone around the clock with a live person. Not a menu. Not a voicemail. Somebody picks up. For Conyers homeowners who’ve been burned by a national outfit quoting one number on the phone and another at the door, that alone changes the conversation. And we quote your price before any work starts. You’ll see it in writing before we touch a post.
Our Gate Installation Services in Conyers
Here’s what we install most often around Conyers, and how each job tends to play out in this area specifically.
Driveway Gate
A driveway gate in a Conyers subdivision usually means automating an existing ornamental-iron gate or replacing one that’s been repaired too many times to trust. We measure the driveway, check the posts, and recommend whether a retrofit makes sense or a new gate is the cheaper long-term answer. Most Conyers driveway gate installations land between $3,200 and $6,800, including the opener, safety edges, and programming. If the gate was hung before modern entrapment protection existed, we’ll bring it up to current safety code while we’re at it.
Pedestrian Gate
Pedestrian gates in Conyers tend to be narrower, lighter, and easier to get wrong than people expect. The post is everything. A pedestrian gate on clay soil that wasn’t set deep enough will sag within a year and the latch won’t line up. We set pedestrian gate posts below the frost line with enough concrete to resist the shrink-swell cycle of Conyers red clay. Typical pedestrian gate installation runs $900 to $2,400 depending on material and whether you want a keypad, intercom, or simple mechanical latch.
Sliding Gate
Sliding gates are the right call for a lot of Conyers driveways because they don’t swing into traffic or block a sloped driveway. They’re also the workhorse on horse farm entrances off SR-138 where a swing gate would be in the way constantly. We hang sliding gates on steel runners or cantilever systems, with the weight carried properly so the gate doesn’t drag in five years. Sliding gate installation in Conyers typically runs $4,500 to $9,000 depending on length, material, and opener type, because it usually involves new posts, a track or cantilever system, and more welding time.
Swing Gate
Swing gates remain the most common style in Conyers HOA neighborhoods, and they fail here in a particular way: the hinge post moves. Red clay absorbs water, swells, and pushes the post. Then it dries and shrinks. The gate binds against the strike. We’ve seen it a hundred times. When we install a swing gate in Conyers, we over-dig the post holes and pour deeper footings than code requires, because we know what this soil does. Single swing gate installation runs $2,800 to $5,500. Double swing gates run $5,000 to $9,500 with an actuator on each leaf and photo eyes wired to current safety standards.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Conyers
We install and service equipment from Viking, Ghost Controls, and DoorKing, among others. That’s not a badge wall. It means when your opener fails, we can usually match or exceed what the HOA mandated back in 2003 without replacing the whole system. We stock common control boards, safety edges, and receiver parts for these brands so a Conyers repair doesn’t wait on a backordered part from a distributor. If it’s a brand we know is a dead end for parts, we’ll tell you straight rather than pad an estimate around it.
Common Gate Installation Problems We See in Conyers Homes
- Hinge posts heaved out of plumb by red clay. Conyers sits on expansive Piedmont clay that swells when wet and shrinks in dry stretches. That repeated movement tilts gate posts until the gate binds on the strike. It’s the single most common installation failure we correct, and it’s why we pour deeper footings from the start.
- Legacy control boards from the 1990s and early 2000s. A lot of Conyers HOA gates still run obsolete DoorKing or FAAC boards that just die one day. The gate won’t open, the remotes stop responding, and the HOA sends a letter. We retrofit those with modern boards and safety sensors without tearing out the existing gate.
- Ice storm damage on decorative iron pickets. Winter ice loads crack and snap thin iron pickets on double driveway gates, especially older ones hung before current safety standards. We can usually weld and repair on site, but sometimes an installation of a heavier, better-engineered gate is smarter than patching again.
- Farm gates posted too shallow for the load. On rural acreage around the Horse Park corridor, we find 6-inch steel posts set in concrete that’s been lifted and tilted by clay expansion. A gate that heavy needs agricultural-grade hardware and a full post reset, not a shim and a promise.
Pricing for Gate Installation in Conyers, GA
Gate installation in Conyers runs from about $900 for a simple pedestrian gate to $9,500 or more for a double swing or long sliding gate with automation. Here’s the breakdown by typical job. Every price is quoted and agreed before work starts. If it’s not in writing, it’s not the price.
- Pedestrian gate: $900-$2,400
- Single swing driveway gate with opener: $2,800-$5,500
- Double swing driveway gate with dual actuators: $5,000-$9,500
- Sliding driveway gate with track or cantilever: $4,500-$9,000
- Farm swing or slide gate, heavy steel: $3,500-$8,500 depending on length and post work
Call (877) 610-2993 for a written estimate. Estimates are free, and there’s no trip charge inside the county.
We Also Serve Cities Near Conyers
Our crews serve Conyers plus the surrounding communities, including Stonecrest, Redan, Snellville, and Stockbridge. If you’re on the edge of Conyers and wondering whether we’ll come out, the answer is usually yes. Call and ask. We’d rather tell you straight than have you guess wrong.
Serving Conyers, GA - Our Local Coverage Area
We’re based in the Conyers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Conyers
Because the soil here is expansive red clay that swells with rain and shrinks when it dries, and most gate posts weren’t set deep enough to resist that movement. The fix is pulling the post, drilling a deeper footing, and pouring more concrete so the bottom of the post sits below the active shrink-swell zone. In Conyers subdivisions off Salem Road, we typically set gate posts 36 to 42 inches deep, which is deeper than most original installations. If your gate is binding, call (877) 610-2993 and we’ll tell you if the post can be reset or if it needs to be replaced.
Yes. Most 1990s and early 2000s ornamental-iron gates can be retrofitted with photo eyes, safety edges, and a modern control board without removing the gate itself. We’ve done it on dozens of gates in the HOA neighborhoods around the Georgia International Horse Park. The gate stays in place, the opener and safety system get replaced, and we weld any worn hinge barrels while we’re there. Call (877) 610-2993 and we’ll tell you if your gate is a good retrofit candidate or if replacement is actually cheaper.
A swing gate pivots on hinges and arcs through space, which means you need clear ground on both sides and room for the gate leaf to travel. A slide gate runs on a track or cantilever system parallel to the fence line, which is why farms off SR-138 with tight entrances, slopes, or frequent tractor traffic usually do better with a slide gate. Slide gates also handle heavier panels better over time. Swing gates on horse farms work fine when there’s room, but they fail faster if the hinge post moves in red clay. For farm work, we typically recommend a sliding gate with a Ghost Controls solar opener so you’re not trenching power to the gate. Call (877) 610-2993 and we’ll help you pick.
Usually the control board has failed or lost its programming, especially on older DoorKing or FAAC units from the late 1990s and early 2000s that are still common in Conyers HOA entries. Sometimes it’s a dead receiver or a corroded wire connection. We can diagnose it on site, and if the board is obsolete, we’ll retrofit a modern one that works with your existing remotes and keypad. Call (877) 610-2993 and describe what the gate is doing, and we’ll tell you over the phone whether it sounds like a board failure or something simpler.
Yes. We install solar gate openers on rural Conyers properties regularly, especially on horse farms and acreage off SR-138 where running electrical service to the gate would cost thousands. A solar setup with a battery bank and a Ghost Controls or Viking opener handles daily cycling fine as long as the panel gets decent sun. On wooded lots where shade is a problem, we’ll tell you that before you pay for something that won’t hold a charge. Call (877) 610-2993 with your gate location and we’ll give you a straight answer.
If you need gate installation in Conyers, call (877) 610-2993 now. A live person answers. We’ll set a time, show up when we say we will, and put the price in writing before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Conyers since 2001.