Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Haltom City
Gate installation in Haltom City runs $1,200 to $8,500 for most residential jobs, with commercial sliding gates starting around $4,500. We get calls from homeowners on Barbara Lane and operators off Belknap Street every week, and we know the difference between what a 1960s chain-link gate needs and what a salvage yard slider demands. Hal Gatewood has been at this since 2001, and the crew that shows up in Haltom City has seen every soil condition, control board, and rusted hinge post this town can produce. Call (877) 610-2993 and a live person answers. No voicemail maze, no call center three states away.
Why Gatewood Fence & Gate Is Haltom City’s Preferred Gate Installation Company
We answer our own phone, 24 hours a day, 7 days a week. That matters in Haltom City because a gate that will not open at 6 a.m. means a fleet truck that cannot leave the lot, or a homeowner who cannot get to work on Hwy 377. Our local reputation is built on showing up when we say we will and standing behind every job with the 90-Day Done Right Promise, stamped in writing. If it is not right, Hal comes back and makes it right. No runaround.
Hal Gatewood’s name is on the shop and on every invoice. We are locally owned and owner-operated, with a published address and license number anyone in Haltom City can look up. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Haltom City locally. We have serviced gates and installed new ones around Haltom City for years. The person who gives you the estimate is the same person who will be in your driveway, looking you in the eye when the work is done. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Our Gate Installation Services in Haltom City
We install gates for homes and businesses across Haltom City, including around the I-820 corridor, Belknap Street, and the residential blocks between Haltom Road and Broadway Avenue. Most of what we do falls into four categories, but if your gate does not fit neatly into one, call us and describe what you have. That is how half our jobs start.
Driveway Gate Installation
A driveway gate in Haltom City sits on Blackland Prairie clay that heaves with every wet spring and dry summer. We install driveway gates with proper concrete footings below the shrink-swell zone so the hinge posts stay put. Whether it is a single swing gate for a 1950s brick ranch or a sliding gate for a wider commercial driveway, we plan the footing depth, the gate weight, and the operator type before we order the first part.
Pedestrian Gate Installation
Pedestrian gates in Haltom City take a beating from kids, dogs, and delivery drivers. We install walk gates with commercial-grade hinges and latches that do not sag after two years. For older homes near Haltom High School or the neighborhoods south of Denton Highway, we often recommend stainless or galvanized hardware that stands up to North Texas weather better than the original 1960s equipment.
Sliding Gate Installation
If you run a used-car lot, salvage yard, or fleet yard along Belknap Street or Airport Freeway, you know what a sliding gate goes through. We build and install heavy-duty sliding gates with rack-and-pinion operators, loop detectors, and debris-resistant track packages. A commercial slider in Haltom City cycles 80-plus times a day. It needs everything sized for that load from day one.
Swing Gate Installation
Swing gates remain the most common residential option in Haltom City, but the old posts from the 1960s and 1970s were not set deep enough for today’s operators and safety requirements. Our Gate Installation team checks the existing post condition before we quote anything. If the post is rusted through at the base, we re-pour it. If it is solid, we build from there. We fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We stock parts locally for Haltom City customers, so a dead control board does not mean waiting a week for shipping. Gatewood Fence & Gate is certified to service nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite. When a salvage yard near I-820 loses a Viking slide operator, we are not guessing which part fits. We stock what Haltom City’s commercial operators actually run, which means fast turnaround on the repairs where downtime costs real money.
Common Gate Installation Problems We See in Haltom City Homes
- Rusted hinge posts on post-war homes. The original steel posts on 1950s-to-1970s chain-link gates in Haltom City rust through at the base, where water pools against the concrete. A gate sags in the hinge post, not in the middle, and that is where we start. Full replacement is often cheaper than repeated sag corrections.
- Clay soil heaving throws gates out of alignment. Blackland Prairie clay shrinks and swells through Haltom City’s dry summers and wet springs, shifting posts seasonally. The same yard may need a hinge adjustment every few years until the footing is re-poured deeper. We can tell you which is the problem after one look.
- Obsolete control boards on aging slide gates. Salvage yards and used-car lots along Airport Freeway run 1990s-era boards that burn out after repeated power surges. Replacing the board is sometimes enough, but when the motor is also drawing high amps, you are better off putting that money toward a new operator.
- Worn v-groove rollers and debris-packed tracks. Commercial sliders near the I-820/Belknap interchange jump their tracks when debris builds up and the v-groove rollers wear down. A jump-out bends the rack gear, and then you are looking at a bigger fix than a simple track cleaning.
Pricing for Gate Installation in Haltom City, TX
A typical residential chain-link swing gate installation in Haltom City runs $1,200 to $3,800 depending on gate width, post condition, and whether you want a manual latch or an electric opener. A pedestrian gate with new posts and hardware runs $600 to $1,900. Driveway gates with automation start around $3,000 and go up from there. Commercial sliding gates start around $4,500 for a basic chain-link slider and reach $8,500 or more for heavy-duty rack-and-pinion setups with loop detectors and safety edges. The quote you get before work starts is the price you pay. Every estimate is free, and we offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote on gate installation in Haltom City.
We Also Serve Cities Near Haltom City
We handle Gate Installation in Haltom City and regularly run crews to Richland Hills, Watauga, North Richland Hills, and Saginaw. If you are a few minutes outside the city line, the same crew, the same pricing, and the same 90-Day Done Right Promise apply. No surge charges for neighboring towns.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Haltom City
If the board is dead and the motor still runs when given direct power, a board replacement usually makes sense. But when the motor is drawing high amps or the operator is 15-plus years old, a full operator replacement is often the cheaper long-term answer, because the motor, gearbox, and limit switches have all worn together. Show me the gate closing on its own and I’ll show you where it’s failing. Call (877) 610-2993 and we can test it on site, then give you a straight answer either way.
We use saw-cut loops sealed with a fuel-resistant epoxy that holds up to diesel and oil exposure, the standard for Haltom City’s salvage yards and wholesale lots. We also set the detector sensitivity high enough to catch a tow truck but not so high the gate cycles for a stray shopping cart. The loop is only as good as the sealant around it. That is where most installers cut corners and where we will not.
If the post is still plumb and the footing has no visible cracking, we can often hang a new gate on the existing post. But many 1960s-era footings in Haltom City were poured shallow, and the clay has been heaving them for 60 years. When a post moves even a half-inch seasonally, a new gate will bind at the latch. We will check it with a level and tell you the truth. Re-pouring a footing is a few hundred dollars of concrete and labor, far less than rebuilding a gate twice.
For a double gate on an exposed lot near the I-820 corridor, we use a heavier gauge frame, reinforced hinge posts, and a drop rod on the inactive leaf, sometimes adding a center stop for extra support. The wind whipping across the open lots off Airport Freeway puts a load on double swing gates that a fenced backyard never sees. We plan for that from the first measurement.
Yes. We install electric strikes on existing chain-link pedestrian gates all over Haltom City, often paired with a keypad and a standard gate latch upgraded to a heavy-duty model. The old 1970s post and frame are usually fine. What fails is the original latch, and we replace it with a commercial magnetic lock or electric strike rated for outdoor exposure. Call (877) 610-2993 for an exact quote, your estimate is free.
Haltom City’s Commercial Corridor: Gate Installations Most Cities Never See
Haltom City’s East Belknap corridor has one of the highest densities of auto salvage yards and wholesale used-car lots in Tarrant County. That is not something you notice on a map. It is something you feel when half your gate calls come from fleet managers and lot owners who run their sliding gates 80-plus times a day. The result is that a large share of gate installation work in Haltom City involves high-cycle commercial chain-link sliders, often requiring loop detectors, rack-and-pinion operators, and debris-resistant track packages that residential markets never see. At a used-car lot near the I-820/Belknap interchange, our crew replaced a worn Viking rack-and-pinion slide gate operator that had failed after years of 80-plus cycles a day. The original post footing had cracked from constant vibration, so we poured a new reinforced footing, trued the track, and installed a new safety photocell pair, then calibrated the loop detectors for the narrow entrance. That is a normal Tuesday in Haltom City. It is not normal in North Richland Hills or Watauga.
Haltom City’s residential stock, most of it built in the 1950s through 1970s, sits on the same expansive Blackland Prairie clay. The shrink-swell cycle throws gate posts out of alignment every season. We see it on Barbara Lane, on the streets south of Glenview Drive, and around the older blocks near Haltom Road. The gates themselves are usually chain-link with mechanical latches that have not been serviced in 20 years. Ornamental iron is less common here than in wealthier Tarrant County suburbs, so most residential gate work focuses on chain-link swing-gate hardware and mechanical latches. The soil is the common thread. It moves everything, and gates bear the brunt.
Give Us a Call and a Live Person Answers
If you need gate installation in Haltom City, call (877) 610-2993. You will get Hal or someone from his crew, not a recording. We will come out, measure, check the posts, check the soil, and give you a written price before any work starts. Free estimate, no trip charge inside the county. If you have a written estimate from another company, bring it. We will give you a second opinion for free and tell you honestly if you are being overcharged. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haltom City with gate installation and repair since 2001.