Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haltom City
Gate parts and welding in Haltom City comes down to one question: do you fix the gate where it stands, or do you replace something that still has years left in it? We fix it. Hal Gatewood has been welding and rebuilding gates since 2001, and our crew spends more time on Haltom City commercial slides and 1950s-era swing gates than most DFW companies spend on residential suburbs. Call (877) 610-2993 and a live person answers, day or night, not a voicemail.
Haltom City is different from the bedroom communities around it. The salvage yards, fleet lots, and light industrial corridors along I-820 and Belknap Street run sliding gates dozens of times a day. Residential streets off Haltom Road and Broadway Avenue are lined with post-war brick homes whose original chain-link gates are now sixty and seventy years old. We know both because we work both, every week.
Why Gatewood Fence & Gate Is Haltom City’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. That’s not a slogan; it’s how we have operated since 2001. We publish our address and license number because we want you to look us up. We’re part of the Gate Parts & Welding side of the business that other companies treat as an afterthought – for us, it’s the whole point.
Haltom City customers don’t get a rotating cast of strangers. They get a background-checked, uniformed crew led by someone who has been fixing gates longer than most of the operators in the salvage yards have been installed. Our 90-Day Done Right Promise is stamped in writing on every job: if it’s not done right, one call brings us back. No runaround, no fine print.
Here’s what matters to the person who answers the door in Haltom City: the 76117 area has hundreds of light industrial lots and modest residential streets. We stock parts specifically for both. Worn v-groove wheels, heavy barrel hinges, post-footing steel, and obsolete control board retrofits are on our trucks, not ordered from a catalog while you wait. Our techs run commercial gate calls off Belknap and residential calls off Denton Highway in the same day because Haltom City is compact. The name is on the shop, and the shop is down the road.
Our Gate Parts & Welding Services in Haltom City
Hinge Replacement
A sagging gate in Haltom City sags in the hinge post, not in the middle. That’s where we start. On chain-link swing gates built in the 1950s through 1970s, the original steel posts have spent five or six decades in Blackland Prairie clay that expands and contracts with every wet spring and dry summer. The hinge post shifts, the gate binds, and the strap hinges bend or crack at the weld. We cut out the old hinges, weld in new ones, and shim or reset the post so the gate hangs square again. Fix the panel without the post and you’ll fix it twice.
Post Replacement
When a Haltom City gate post fails, it’s almost always at the heel, right where the post meets the concrete footing. The seasonal shrink-swell of the clay soil works the post back and forth until the steel fatigues. We dig it out, set a new post in fresh concrete, and weld or bolt the gate hardware back to it. For residential chain-link gates, that means new hinges and a new latch. For commercial sliding gates, it means resetting the track post and re-aligning the v-groove wheels so the operator stops fighting the load. We quote the full job before we start, and the price is agreed before any work begins.
Rail Repair
Top rails and tension rails on Haltom City chain-link gates take a beating from both use and weather. North Texas hailstorms dent the top rails on lightweight gates; years of slamming cranes the tension wire and lets the mesh go slack. We cut out bent or rusted rail sections, weld in new steel, and pull the mesh tight so the gate doesn’t flop or catch on the latch post. On commercial sliders, the load-bearing bottom rail is the one that fails first. We reinforce it with welded steel rather than replacing the whole panel, which saves Haltom City business owners real money.
Custom Welding
Some jobs don’t fit a catalog. A salvage yard off Belknap needs a custom stop plate welded to a steel post because the gate keeps overtraveling. A homeowner on a Watauga-adjacent street wants a drop rod bracket welded to a gate that predates the modern hardware. Hal welds on site, in the driveway or on the lot, so the gate never leaves your property. We don’t haul it off and return it when we get around to it. We fix it where it stands. If the steel is too far gone to weld, we’ll tell you that plainly and show you why replacement is the cheaper answer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
Our crew is certified to service nine major gate brands, including Linear, Viking, and DoorKing. Haltom City has a lot of legacy equipment – DoorKing slide operators at auto lots, Linear swing arms on residential gates, Viking control boards from the 1990s still running behind the salvage yard fence. We stock parts for these systems because we know what’s out here. When an obsolete control board burns out, we retrofit with current entrapment-protection hardware rather than leaving you with a non-compliant gate. The operator gets modern safety photocells and a new board. The gate gets its wheels and rail clearanced. It goes back to work the same day.
Check the Gate Parts & Welding in Haltom City page for the full list of brands and our local service details.
Common Gate Parts & Welding Problems We See in Haltom City Homes
- Worn v-groove wheels on commercial sliding gates. The salvage yards and fleet lots near I-820 and Belknap run their sliders dozens of cycles a day. Worn wheels skip and drag, chewing up the track and burning out operators. We stock replacement wheels and rack and pinion spacers so the gate doesn’t sit dead while parts get ordered.
- Leaning gate posts every spring. The Blackland Prairie clay under Haltom City swells with spring rain and shrinks in August heat. This seasonal movement shifts 1950s-era hinge posts and throws your swing gate out of alignment year after year. The fix is a resettled post footing and new hinge welds, not just a hinge adjustment.
- Obsolete control boards without entrapment protection. Most legacy gate operators in Haltom City pre-date the UL 325 safety standard. No photocells, no reverse edges, no automatic stop. We retrofit the board and add current entrapment protection so the gate is compliant and doesn’t crush someone on a salvage yard lot.
- Rust at the post base and hinge welds. Older chain-link gates on Haltom City’s small residential lots rust where the post meets the concrete and where the hinge welds sit under constant moisture. We cut out the rust, weld in fresh steel, and coat the joints so the gate doesn’t fail mid-swing.
Pricing for Gate Parts & Welding in Haltom City, TX
A typical hinge replacement on a Haltom City residential chain-link gate runs $150-$280 including new strap hinges and welded attachment. Post replacement runs $220-$450 depending on post size and the condition of the surrounding concrete. V-groove wheel replacement on a commercial slider runs $90-$160 per wheel with labor, and a full rack and pinion clearance runs $180-$320. Custom welding jobs like a reinforcement brace or stop plate start around $120 and run up from there based on steel and time. We quote the price before we start, and the number we quote is the number you pay. Free estimates, no trip charge inside the county, and a free second opinion on any written estimate. Ask about the permanent 10% discount for seniors and veterans.
Call (877) 610-2993 for an exact quote on your gate – the estimate is free and there’s no pressure to book.
We Also Serve Cities Near Haltom City
Our crews run gate parts and welding calls throughout the area, including Richland Hills, Watauga, North Richland Hills, and Saginaw. Dispatch is coordinated from our Dallas-Fort Worth office, but the tech who pulls up to your Haltom City gate is part of Hal’s crew, not a stranger in a branded van. Same local knowledge, same 90-Day Done Right Promise, same live phone answer.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haltom City
Haltom City sits on Blackland Prairie clay, which expands when wet and shrinks when dry. The spring rains swell the soil around your post footing, and the summer heat contracts it. That back-and-forth movement works the post loose and makes it lean. The real fix is resettling the post in fresh concrete and re-welding the hinges so the gate stays square through the seasons. Call (877) 610-2993 for a free estimate on post resetting.
Yes. Most pre-UL 325 operators need a new control board, safety photocells, and reverse-edge hardware. We stock retrofit kits for the operators still running on Haltom City’s commercial lots, and we install them on site. The retrofit typically runs $400-$700 depending on the operator, and it brings the gate up to current compliance. We quote the full number before we start.
On a Haltom City salvage yard gate cycling 40-plus times a day, v-groove wheels should be inspected every six months and replaced every one to two years. The yards near I-820 and Belknap run their gates harder than any residential gate in the county, and worn rollers damage the rack and pinion. We can set up a maintenance schedule that catches the wear before the gate binds. Call (877) 610-2993 to talk about your specific gate.
Usually, yes. We weld a steel brace along the frame or across the sagging corner, then pull the mesh tight and re-set the hinge hardware. If the original pipe is too rusted to take a solid weld, we’ll tell you before we touch it. The 90-Day Done Right Promise covers every brace we weld. Free estimates, no trip charge inside the county.
We keep retrofit boards, limit switches, and safety hardware for legacy LiftMaster and Viking operators on the truck. Many Haltom City commercial gates and residential swing arms run these exact systems, and waiting on a mail-order board leaves your gate dead. We stock local parts because local gates need them. Call (877) 610-2993 and we’ll tell you over the phone whether we have your part in hand.
Contact Gatewood Fence & Gate in Haltom City
If your Haltom City gate is leaning, sagging, dragging, or bound up, don’t wait for it to fail. Call (877) 610-2993 for a free estimate from Hal’s crew. A live person answers around the clock, seven days a week. We come out, look at the gate, quote you a price, and fix it where it stands. No call center, no stranger, no surprise on the invoice. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haltom City and surrounding Tarrant County communities since 2001.