Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Haltom City
If your gate is sagging, grinding, or refusing to open on a Haltom City morning, the fix usually costs between $180 and $340, and we can often get it working the same day. At Gatewood Fence & Gate, we have been repairing gates since 2001, and the crew that shows up at your door knows the specific problems Haltom City clay soil and high-cycle commercial traffic throw at a gate. Call (877) 610-2993 and a live person answers, any hour, any day.
Haltom City is not just another stop on a route for us. We know the shared driveways off Denton Highway where a gate has to swing just right, the tight side yards where working space is measured in inches, and the commercial lots near Belknap Street that run a sliding gate fifty times before lunch. That local knowledge is the difference between a repair that holds and one that fails again in six months.
Why Gatewood Fence & Gate Is Haltom City’s Preferred Gate Repair Company
Hal Gatewood put his name on this company, and he has kept the shop owner-operated since 2001. That is the oldest accountability there is. When you call, you are not routed through a call center three states away. Hal or one of his crew answers the phone, and when a job needs doing in Haltom City, the person who shows up is background-checked, uniformed, and backed by a 90-Day Done Right Promise in writing. If it is not done right, one call brings us back. No runaround.
We have repaired residential chain-link gates off Haltom Road and commercial sliders along the Airport Freeway corridor. We have seen the rust-eaten hinge posts on 1960s brick homes and the jammed tracks on salvage yard gates that cycle dozens of times a day. Homeowners and business owners in Haltom City call us because they want someone who will actually show up in the window they promised, quote a price before any work starts, and stand behind it with their name, not a script.
Our Gate Repair Services in Haltom City
Gate Realignment
A gate that drags on the concrete or will not latch is almost never a problem with the gate itself. The post has moved, or the hinges have pulled loose from a post footing that has shifted in Haltom City’s Blackland Prairie clay. Those clay soils swell in wet springs and shrink in dry summers, and the post moves with it. Our Gate Repair team realigns the gate at the hinge post and the latch post, because fixing the panel without addressing the post means you will fix it twice.
Electric Gate Repair
Electric gate operators on Haltom City properties fail for predictable reasons: a seized wheel on a chain-link slider, a misaligned photocell, or a limit switch that has drifted out of position. We service LiftMaster, Viking, DoorKing, and Ghost Controls operators daily, and we stock the common parts for those brands so a repair is not delayed by an order from a warehouse two states away. Hal has been fixing electric gates since 2001, and the name is on the shop.
Hinge & Post Repair
On Haltom City homes built in the 1950s through the 1970s, the original steel gate posts are now 50 to 70 years old. They rust at the base, they lean with ground heave, and the hinges pull loose no matter how many times someone tightens the bolts. We cut out the rusted section, weld in new steel on site, and reset the post so the gate swings true. Welding on site means your gate stays in your driveway, not hauled off to some shop for a week.
Automatic Gate Repair
An automatic gate that opens halfway, beeps, and reverses is telling you something specific. It might be a safety edge fault, a loop detector that has failed, or an operator that has been handling more cycles than it was sized for. Haltom City has an unusual amount of high-cycle commercial gate traffic, especially around the I-820 and Belknap Street interchange, and we are equipped for that workload. Residential or commercial, we diagnose the actual fault and repair the part that failed, not the parts that still work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
Gatewood Fence & Gate is certified to service nine major gate brands, and on any given week in Haltom City we are working on Viking, DoorKing, Ghost Controls, and Elite operators most often. We stock parts for these systems locally, which means a repair on a Haltom City residential gate or a commercial slider near the Airport Freeway is not waiting on a shipment. If your operator is older or an off-brand, Hal will give you an honest read on whether it is worth repairing or time to replace. We will quote that price upfront, before any work starts.
Common Gate Repair Problems We See in Haltom City Homes
- Sagging chain-link swing gates on older post footings. Haltom City’s housing stock dates largely to the post-war boom, and many original gate posts are set in clay that heaves seasonally. We reset or replace those posts and realign the hinges so the latch bar actually meets the latch.
- Commercial sliding gates jamming on debris-clogged tracks. The auto salvage yards and fleet yards near the I-820/Belknap corridor run sliding gates through gravel, dirt, and tire shavings all day. Debris packs the track, the v-groove wheels seize, and eventually the operator trips its thermal overload.
- Rust-eaten hinge posts and damaged safety photocells on older homes. North Texas hailstorms dent thin steel panels, and the impact points rust first. On older chain-link gates, the post rusts right at ground level, where moisture sits. We weld in new steel rather than slapping a patch over rot.
- Gates that close on their own or drift open. If a gate drifts on a slope, the hinges are not plumb, or the closer has lost tension. On Haltom City lots with small front yards and shared driveways, a drifting gate is a safety problem as much as a nuisance. We fix it at the hinge, because that is where it starts.
Pricing for Gate Repair in Haltom City, TX
Here are straight numbers for Haltom City. A hinge and post repair on a standard chain-link swing gate runs $180 to $320 depending on whether the post needs replacing or can be reset. Gate realignment typically lands between $150 and $280. Electric gate repair starts around $200 for a limit switch or photocell and runs up to $450 for a control board replacement on a commercial operator. A worn v-groove wheel and track cleaning on a commercial slider near Belknap Street usually costs $120 to $200. Every price is quoted and agreed before any work starts, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Haltom City
Our work takes us all over Tarrant County, so if you are in Richland Hills, Watauga, North Richland Hills, or Saginaw, the same crew and the same 90-Day Done Right Promise apply. Whether it is a residential gate in Haltom City or a commercial slider just over the line in Richland Hills, we answer the phone live and show up when we say we will. Learn more about the areas we cover at our Gate Repair in Haltom City city page.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Haltom City
The soil under your gate post is the culprit. Haltom City sits on Blackland Prairie clay, which swells in wet weather and shrinks in dry spells, and that movement works hinge screws loose over time. Even if someone retightens them, the post continues to move unless it is reset deeper or stabilized. We fix the root problem instead of the symptom, so you are not rehanging the gate every spring. Call (877) 610-2993 and we will take a look at the post footing.
Most commercial sliding gate failures in that corridor are same-day fixes if we can get to the site during business hours. The usual culprits are seized v-groove wheels, debris-filled tracks, and worn rack and pinion teeth, and we stock those parts locally because we see them so often on Haltom City fleet yards and salvage lots. We serviced a heavy sliding chain-link gate on a used car lot just off Belknap Street not long ago, where the operator was tripping its thermal overload from a seized wheel and a gravel-packed track. Our crew replaced the wheel, cleared the track, and reset the limit switches so the gate could cycle cleanly. Call (877) 610-2993 and describe what the gate is doing, and we will give you a straight answer on timing.
Yes. We add loop detectors to existing automatic gate operators on Haltom City properties regularly, especially on residential gates where a vehicle approaches and the gate should open automatically. It involves cutting a small loop into the driveway surface, running the lead wire to the operator, and programming the board to recognize the signal. We do it with your existing operator whenever the board has an open loop input. Call (877) 610-2993 for a free estimate and we will tell you whether your current operator is compatible.
No, and on Haltom City commercial lots it almost always means debris in the track or a worn v-groove wheel. The auto salvage yards and used-car lots near the I-820/Belknap interchange kick gravel, dirt, and metal shavings onto the tracks constantly, and a gate that has to cycle dozens of times a day wears through wheels fast. A grinding noise signals metal-on-metal contact, and running it that way will eventually burn out the operator motor. Get it addressed before it kills the operator. Call (877) 610-2993 and we will diagnose it.
We do. A keypad that will not accept the code, a receiver that only works from close range, or a solar panel that no longer holds a charge are all repairable problems we see on Haltom City residential gates. Sometimes it is a simple corroded connection; sometimes the keypad itself has failed and needs replacing. We will test the whole circuit and replace only what failed. Call (877) 610-2993 and Hal or a crew member will work through it with you.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haltom City and the surrounding Tarrant County communities since 2001.