Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Georgetown
Gate repair in Georgetown usually comes down to two things: a post that has shifted in the caliche soil, or an operator that gave up in the heat. Most jobs take us an afternoon, and Hal or one of his crew will be the one doing the work, not a subcontracted stranger. If your gate is dragging, binding, or dead at the keypad, call (877) 610-2993 and a live person picks up, any hour. We have been running Gatewood Fence & Gate since 2001, and we answer to the name on the shop.
Georgetown’s newer subdivisions, from Sun City Texas in 78633 to Wolf Ranch and Teravista in 78628, are full of automated driveway and courtyard gates that were installed to spec but never quite built for the way our ground moves. When the post heaves, the gate binds. When the gate binds, the operator burns out. We fix the root of it, not just the symptom, and we weld on site so your gate never leaves your driveway.
Why Gatewood Fence & Gate Is Georgetown’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates in Texas since 2001, and the reason Georgetown homeowners keep calling us back is simple: we repair what other companies want to replace. A sagging gate is a hinge-post problem, not a reason to buy a whole new gate. A noisy slide gate is a track and rack problem, not a reason to swap the operator. When Hal shows up, he is looking for the part that failed, not the full replacement invoice.
In Georgetown specifically, homeowners deal with a double bind. The Balcones Escarpment soils expand and contract so aggressively that posts move every season. And the HOA rules in communities like Sun City Texas demand finishes that match the approved Del Webb look. A repair that would pass anywhere in Williamson County can still get flagged by an architectural committee if the hinge finish is wrong. We know the bronze and wrought-iron families those committees expect because we have made the second trip other companies leave you with, and we do not intend to make it again.
Calls are answered by a live person 24/7. Not a voicemail box, not a call center three states away. You get Hal, or you get someone on his crew who actually works in Georgetown every week. Background-checked, uniformed, and carrying the 90-Day Done Right Promise in writing on every job. If it is not done right, one call brings us back.
Our Gate Repair Services in Georgetown
Electric Gate Repair
An electric gate that opens when it feels like it, or not at all, usually points to one of three failures around Georgetown: a circuit board cooked by a summer week over 100°F, a safety photocell knocked out of alignment by a shifting post, or a keypad that has baked in the direct Texas sun. We service LiftMaster, FAAC, and BFT operators regularly in Georgetown, and we can diagnose most electric failures in one visit. Hal will quote the repair before he starts, and the price on the quote is the price on the invoice.
Automatic Gate Repair
Automatic gates in Georgetown work hard. The wet-dry cycles of our expansive soils mean operators get torqued in ways they were never designed for. A swing-gate arm pushing against a post that has leaned three degrees out of plumb is going to strip its own gearbox eventually. We re-align the post, true the gate, and re-check the operator after. That order matters; fixing the operator without the post just means you will be fixing the operator again next spring.
Hinge & Post Repair
This is the most common call we run across Georgetown, and it is the one we care about most. A gate sags in the hinge post, not in the middle, and that is where we start. In Sun City Texas and Teravista, we regularly see posts that have heaved half an inch or more from the caliche’s seasonal movement. We pull the post, address the footing, and re-set it so the gate swings true. If the post is sound but the hinges have worn or rusted through, we weld new hinge barrels on site and grind the old ones off clean.
Gate Realignment
Realignment in Georgetown means more than adjusting a couple of hinges. It means checking the post plumb in two directions, checking the gate’s own square, and checking what the operator is doing to the whole assembly every time it cycles. On slide gates in Teravista, fine caliche dust grinds into the rack and pinion, wearing a groove that makes the gate jump and screech. That jump trips loop detectors and safety reversing systems, and the gate starts reversing for no reason. We clean the rack, dress the pinion, and re-set the track so it rolls quietly again.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Georgetown
We are certified to service nine major gate brands, and around Georgetown we see a lot of FAAC and BFT swing operators on higher-end courtyard gates, plus Linear and Viking on slide gates in newer communities like Wolf Ranch. Hal keeps common parts stocked so a bad control board or a failed photocell does not mean waiting a week on a distributor. If the part has to be ordered, we tell you that before we start and give you a straight answer on the timeline.
Common Gate Repair Problems We See in Georgetown Homes
- Post heaving from caliche soil movement: The wet-dry swings along the Balcones Escarpment push posts out of plumb every season. The gate starts dragging or the operator starts laboring, and eventually something gives. We re-set the post with a deeper pour and re-hang the gate so it swings free.
- Sun City Texas finish mismatches that fail HOA review: The architectural committee in 78633 expects gate hardware to match the established Del Webb aesthetic. Generic big-box hinges or a bright zinc operator arm can fail inspection even though the gate works fine. We keep bronze and wrought-iron finish options on hand for exactly this reason.
- Heat-failed operators and degraded seals: Georgetown summers regularly exceed 100°F, and operator cabinets without ventilation bake their circuit boards over time. Rubber seals and plastic gears soften, warp, and fail. We check heat rating and ventilation on every operator we touch.
- Sprinkler rust at the hinge-post base: In Sun City Texas particularly, automatic sprinklers spray the bottom hinge post of courtyard gates every morning. The powder coat eventually flakes off right where the post meets the concrete, and the rust starts from underneath. We cut out the rust, weld in new material, and re-coat so the repair matches the original finish.
Pricing for Gate Repair in Georgetown, TX
Gate repair pricing in Georgetown runs a pretty predictable range depending on what actually failed. The price you get on the phone is a range; the price you get when Hal is standing in your driveway is the price, in writing, before any work starts. Here is what we see across Georgetown:
| Repair Type | Typical Georgetown Range |
|---|---|
| Hinge replacement (single gate, on-site weld) | $180-$340 |
| Post re-set and re-alignment | $350-$750 |
| Operator control board replacement | $275-$520 |
| Safety photocell pair replacement | $160-$280 |
| Full gate realignment with rack cleaning | $260-$450 |
What moves the number within those ranges is the condition of the post footing, whether we are welding on site or replacing a bolt-on part, and how far the gate has drifted from square. We offer a free second opinion on any written estimate, no trip charge inside Williamson County, and $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. The quote you agree to is the invoice you pay.
We Also Serve Cities Near Georgetown
We run Gate Repair calls across Williamson County every week, so if you are in Round Rock, Brushy Creek, Cedar Park, or Hutto, you are still in our regular service area. The same crew that works Georgetown neighborhoods works yours, and the same 90-Day Done Right Promise covers the job. For full details on our Gate Repair in Georgetown service area, call us and we will tell you straight whether we can get to you today.
Serving Georgetown, TX - Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Georgetown
Because the caliche and clay soils under Sun City expand when wet and shrink when dry, and that seasonal movement pushes the hinge post out of vertical a little more every year. Once the post is out of plumb, the gate sags, the operator strains, and the safety sensors fall out of alignment. The fix is to pull the post and re-set the footing deeper, then re-hang the gate. Re-tightening hinges alone will not hold. Call (877) 610-2993 and we will come check the post before you spend money on a new operator.
Yes, in most cases. For a swing gate, the operator mounts to the gate and a post-mounted pillar, so we need a solid post and a power source nearby. If the builder did not run conduit for a future operator, we can often run low-voltage from an exterior outlet with landscaping wire or a short surface-run in conduit along the foundation. For a slide gate, the track and rack already exist, so the work is operator, power, and safety edges. The power run and conduit are usually the part builders skipped, and it is the part we handle most often in Georgetown’s newer communities. Call us for a free measure and a written price.
Worn hinge barrels and bent leaf plates from post movement. Teravista sits on the same expansive soils as the rest of the Balcones Escarpment, and as posts shift, the hinges take uneven load until a barrel egg-shapes or a weld starts to crack. We replace the hinge and often reinforce the mounting point at the same time. The gate stays in your driveway, welded on site, and the repair is covered by the 90-Day Done Right Promise.
The HOA does not mandate a single brand, but it does mandate that the gate hardware and finishes match the community’s approved Del Webb aesthetic families. In practice, that means the visible operator arm, keypad, and hinge finishes need to be bronze or wrought-iron matched, not bright zinc or off-the-shelf white plastic. Some Gatewood jobs have been to remove a perfectly functional operator that failed design review because it was the wrong finish. We keep compliant finishes on hand and can quote a Sun City-compatible repair the first time. Call (877) 610-2993 and describe what the committee flagged; we will tell you what it takes to make it pass.
Usually, it is not for no reason. It is fine caliche dust grinding into the rack and pinion, creating a worn groove on the rack teeth that makes the gate jump at a specific spot. The operator’s loop detector senses the jump as a resistance spike and triggers the safety reverse. Sometimes a loose safety edge connection does the same thing. We clean the rack, dress the pinion, and re-set the track, then cycle the gate a dozen times while watching the reversing sensor. In Georgetown, this is one of the most common slide-gate calls we run, and it is almost always repairable without replacing the operator.
Need a gate fixed in Georgetown? Call (877) 610-2993 now and talk to a real person who knows Georgetown gates. If it is urgent, say so; we will route a crew your way. If you have a written estimate from another company, bring it; Hal will give you a free second opinion before you commit to anything. Estimates are free, the price is agreed before work starts, and every job carries the 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Georgetown since 2001.