Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Georgetown
Gate parts and welding in Georgetown usually means one of three things: a hinge post that has heaved out of the ground, a rail that has rusted or snapped at the weld, or a latch and operator that no longer line up after the clay did its seasonal shuffle. A typical hinge or post repair in Georgetown runs $240-$680, and custom welding work most often lands between $180 and $450 depending on the metal and the finish. We fix the gate where it sits, weld it on site, and stand behind the work with our 90-Day Done Right Promise in writing. Call (877) 610-2993 and you’ll get a real person on the line, not a recording.
Why Gatewood Fence & Gate Is Georgetown’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and on every invoice. That’s the oldest accountability there is. When someone in Serenada or Old Town Georgetown calls about a gate dragging on the driveway, they get a straight answer about what failed and what it will cost before we ever touch a wrench.
Our crews work Georgetown neighborhoods regularly, from the ranch-style homes off Williams Drive to the gated entries and courtyard gates in Sun City Texas and Wolf Ranch. We know what the HOA boards expect, we know what the soil does to posts, and we carry the finishes and parts that match this area. Reviews from Georgetown homeowners consistently mention the same thing: the person who showed up was the person who quoted the job, and the gate was right when they left. That’s how we’ve built a strong local reputation here, one welded hinge at a time.
Since dispatch is coordinated from our Austin office and our crews serve Georgetown locally, response times are measured in hours for most repair calls, not days. We stock common gate hardware, operators, and welding consumables for this market, so we’re not waiting on a truck from somewhere else to fix your gate.
Our Gate Parts & Welding Services in Georgetown
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. In Georgetown, hinge replacement often comes down to more than swapping a worn barrel hinge. We regularly see posts that have moved a half-inch or more through the wet-dry cycles, which means the new hinge has to account for that or you’ll be calling us again in a year. We weld heavy-gauge hinges in place, not bolt-on hardware that wallows out the post. If you’re in Sun City Texas, we match the bronze and wrought-iron finish family Del Webb requires so your HOA passes it the first time.
Post Replacement
Georgetown’s expansive caliche and clay soils over limestone are hard on gate posts. As moisture swings from waterlogged to bone-dry, posts heave and lean, and that’s the dominant repeat call we get across the city. Fix the panel without the post and you’ll fix it twice. We cut out the old footing, set a new post at the proper depth for this soil, and re-weld the hinges and latch plates so the gate swings true and the operator doesn’t fight itself. In Sun City Texas and Wolf Ranch, we see courtyard and driveway gate posts that have moved enough to bind an automated operator, which is exactly the kind of job that demands on-site welding, not a parts swap.
Rail Repair
A rusted bottom rail doesn’t mean the whole gate has to go. We weld in new rail sections and repair cracked or failed welds where they happen, which keeps your gate looking right and saves you the cost of a full replacement. Georgetown’s 100°F-plus summers accelerate oxidation on iron gates, especially near sprinkler heads and on the bottom rail where grass and mulch hold moisture against the metal. We grind back to clean steel, weld the repair, and apply a finish that matches what’s already on the gate.
Custom Welding
Not every gate problem is a broken part. Sometimes a homeowner needs a modification: a taller latch for a grandkid who can’t reach, a reworked hinge mount for a gate that was hung wrong from the start, or a custom bracket for a new operator rail. We do that welding on site, in your driveway, so the gate never leaves the property. When we take on a custom welding job in Georgetown, we build for the soil and the heat, not just for what looks right in a catalog.
Need a full rundown of what we handle? See our Gate Parts & Welding service page for details on every repair type we offer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Georgetown
We service and stock parts for the gate operators Georgetown homeowners actually have: LiftMaster, FAAC, Linear, Viking, Ghost Controls, and DoorKing among them. That matters because a generic operator board or a mismatched remote that works fine in another climate may fail fast here once the summer heat sits on it day after day. We keep common boards, remotes, keypads, and battery backups in our local stock, so we’re not ordering from a warehouse and making you wait another week. Hal and his crew are certified to work on nine major brands, and we know which ones hold up in Georgetown’s heat.
Common Gate Parts & Welding Problems We See in Georgetown Homes
- Heaved hinge posts from caliche and clay. Georgetown sits on the Balcones Escarpment, and the soil swings between swollen and dry. Posts move, gates lean, and operators lose their limit settings. The fix is post stabilization and re-welded hinge plates, not just a hinge swap. We have done this more times in Georgetown than we can count, and we get it right the first time.
- Heat-killed operator boards and seals. Summer temperatures over 100°F bake the rubber seals and circuit boards in gate operators that aren’t rated for it. We see intermittent failures as boards overheat, and the timing is often terrible: right when snowbirds leave for months. We install heat-rated components and explain battery backup options so a power cut doesn’t trap anyone.
- Mismatched hardware that fails Sun City Texas HOA review. Off-the-shelf hinges and latches from a big-box store rarely match Del Webb’s approved bronze and wrought-iron finish family. That creates HOA notices, second trips, and a gate that still looks wrong. We know the finish spec for the 78633 ZIP and carry matching hardware.
- Rusted rails and failed welds on slide gates. Community entry monuments and individual slide gates see repeated wheel traffic on the rail, and the summer heat accelerates rust. We cut out bad rail sections, weld new ones, and replace rollers so the gate runs smooth instead of grinding metal against metal.
Pricing for Gate Parts & Welding in Georgetown, TX
Here’s what we charge in Georgetown, straight up. Hinge replacement on a standard single swing gate runs $240-$420 including the hinge, welding, and finish matching. Post replacement runs $380-$680 depending on post size, footing depth through the clay and caliche, and whether we’re re-setting one post or a pair. Rail repairs typically land between $180 and $450 for cut-out, new steel, weld, and finish. Custom welding work starts around $180 and runs to $450 for most residential modifications. If a job runs over $200, we take $40 off. The price we quote is the price you pay, agreed before we start, every time. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Georgetown
Our crews cover the whole Georgetown area, and we’re out in Round Rock, Brushy Creek, Cedar Park, and Hutto regularly. If you’re a bit outside the city center, see our Gate Parts & Welding in Georgetown page for service area details. Same crew, same 90-Day Done Right Promise, no trip charge inside the county.
Serving Georgetown, TX - Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Georgetown
Yes, we match the Del Webb finish spec for Sun City Texas homes in the 78633 ZIP, including the bronze and wrought-iron powder-coat families that HOA boards in that community require. We keep those finishes in stock and apply them to hinges, latch plates, and welded rail repairs so the gate passes inspection the first time. Call (877) 610-2993 and tell us you’re in Sun City; we’ll bring the right finish, not a generic one.
Georgetown’s caliche and clay soils expand when wet and shrink when dry, which heaves hinge posts, leans the gate, and throws the operator out of limit so it binds or stops mid-cycle. We fix this by re-setting or replacing the post with proper depth for this soil, re-welding hinges and latch plates, and then re-programming the operator to match the corrected swing path. Call (877) 610-2993 for a free assessment.
Yes, we install battery backup on LiftMaster, FAAC, and most other operator brands we service in Georgetown. The backup kicks in automatically when power drops, so the gate still opens and closes for a set number of cycles. This is especially common for Sun City Texas residents who leave for months at a time. Call (877) 610-2993 and we’ll spec the right backup for your operator.
For a rusted or sagging gate rail in Wolf Ranch, Teravista, or anywhere in the 78628 ZIP, we cut out the bad section, weld in new steel, and refinish to match your existing gate. We also check the post alignment and hinge wear while we’re there, because a sagging rail is often the symptom of a heaving post underneath. Call (877) 610-2993 for a free estimate.
Yes, we replace slide gate rollers, guide posts, and rail sections on community entry gates in Georgetown’s master-planned communities. We understand the HOA approval process many of these communities have, and we do the work so the gate passes an inspection and keeps running quiet. Call (877) 610-2993 and we’ll come out and look at the gate.
Georgetown Gate Service That Actually Shows Up
If your gate is leaning, dragging, or dead in the driveway, don’t let it sit. We serve Georgetown with on-site welding, real parts, and a live person answering the phone around the clock. The name is on the shop, and the shop is down the road. Call (877) 610-2993 for a free estimate, and you’ll get Hal or one of his crew on the line, ready to set a time that actually works. We’ll quote the price before we start, do the work in your driveway, and put the 90-Day Done Right Promise in writing. That’s how we’ve done it since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Georgetown since 2001.