Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Motor & Opener Across Georgetown
Gate motor and opener work in Georgetown usually breaks down to two questions: how fast can someone get here, and will the fix hold through the next caliche shift. We answer the phone with a live person at (877) 610-2993, and the person who shows up understands Georgetown soil, Georgetown HOA rules, and Georgetown heat. Hal Gatewood has been at this since 2001, and his name is on the shop. That means when a gate motor burns out on a Friday afternoon in Sun City or Wolf Ranch, you are not leaving a voicemail and hoping.
We are the Gate Motor & Opener team that other companies call when their first repair fails. We weld on site, we reset posts properly, and we stand behind the work with a 90-Day Done Right Promise in writing. No call centers. No faceless dispatchers. Just a live person, every hour of the day.
Why Gatewood Fence & Gate Is Georgetown’s Preferred Gate Motor & Opener Company
Georgetown homeowners have been burned by national outfits that quote one number on the phone and hand over a different invoice at the front gate. We hear that story at least twice a week. Hal built this company on the opposite idea: the price you agree to is the price you pay, and every job carries a written promise that if it is not done right, one call brings us back. No fine print, no runaround.
Customers in Georgetown regularly tell us the same thing: they appreciate that the person answering the phone at midnight is the same person who might weld a hinge post at noon. Our published 90-Day Done Right Promise has kept us honest across thousands of gates in the 78626, 78627, 78628, and 78633 ZIP codes. We answer 24 hours a day, seven days a week, because gates fail on Sunday evenings and holiday weekends too.
Local knowledge matters when you are working on automated gates in Georgetown. Knowing that a swing gate post in Wolf Ranch is going to heave after a wet spring is not something a national call center can tell you. Knowing that a Sun City Texas courtyard gate needs a specific bronze finish family to pass HOA inspection is not in the manual that comes in the box. That is experience, and it is why Georgetown homeowners pass our number to their neighbors.
Our Gate Motor & Opener Services in Georgetown
Motor Installation
New gate motor installation in Georgetown starts with measuring the actual gate, not guessing from a photo. A 16-foot ranch gate off Ronald Reagan Boulevard weighs far more than a courtyard gate in Sun City, and the operator has to be sized accordingly. We install swing, slide, and ram operators from brands we trust, set the posts level, wire the safety edges properly, and hand you the remote with the programming already done. Installations are measured, ordered, and scheduled, never rushed or half-baked. We provide a free measure and a written price before any work starts.

Motor Repair
Most gate motor repairs in Georgetown come down to one of three things: a blown capacitor from the gate binding, a cooked circuit board from a hundred-degree afternoon, or limit switches that have drifted out of alignment. Hal’s crew fixes the root cause, not just the symptom. If a motor grinds halfway and stops, we do not just tighten the chain and call it done; we check whether the hinge post has moved out of plumb, because that is what killed the motor in the first place. Fix the motor without the post and you will fix it twice.

Slide Motor
Slide motors take the worst abuse in Georgetown’s climate. The rack and pinion absorbs every shift in the ground, and when caliche soil expands after rain, the gate can bind against the track and snap the gear teeth. We service slide motors on properties throughout Georgetown, from single driveway gates in Teravista to wide ranch entrances east of town. We replace broken rack sections, align the track, and reset the motor mount so the gate rolls clean instead of fighting its own frame.

Battery Backup
Power outages happen in Georgetown. Ice storms, thunderstorms, rolling brownouts. When the grid drops, a gate without battery backup becomes a locked wall between you and your truck. We install and service battery backup systems that keep your gate motor running, and we recommend them for every Georgetown homeowner whose gate is their only way in. For solar-powered ranch gates, we check that the battery bank actually holds a charge; cloudy stretches in the hill country drain under-sized banks faster than most people expect.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Georgetown
We are certified to service nine major gate motor brands, including FAAC, BFT, Linear, and Viking. For Georgetown customers, that matters because we keep the parts that actually fail on hand: Linear control boards, FAAC limit switches, BFT gear sets, Viking photoelectric eyes. When a storm knocks out your operator on a Tuesday evening, you do not want to wait a week for a part to ship from a warehouse in another state. We stock what Georgetown gates need, and when a part is not on the truck, we know the local suppliers who have it the same day.
Common Gate Motor & Opener Problems We See in Georgetown Homes
- Post heaving from caliche and clay soil. Georgetown sits on the Balcones Escarpment, where the soil swells after rain and shrinks in drought. When the hinge post moves, the gate binds and the motor capacitors blow. We reset posts deeper and wider so this does not repeat every wet season.
- Circuit board failure from extreme heat. Georgetown summers routinely top 100°F, and cheaper operators are not built for that. The control board degrades, the gate works intermittently, and then it quits entirely. We install heat-rated components wherever possible, and that single change extends motor life noticeably.
- Dead solar batteries on long ranch driveways. Properties east of Georgetown along Ronald Reagan Boulevard often run gates on solar because running mains power costs thousands. When cloudy weeks arrive, the batteries drain and the gate sticks closed. We size battery banks correctly or add an AC trickle circuit when feasible.
- Sun City HOA finish mismatches. Homeowners in 78633 who replace a hinge or a pull with a big-box part sometimes find the HOA flags it. A second trip with the right bronze or wrought-iron finish is avoidable when the tech knows the Del Webb-approved families before pulling parts off the truck.
Pricing for Gate Motor & Opener in Georgetown, TX
Gate motor replacement in Georgetown typically runs $850 to $2,200 depending on the operator type and gate weight. Basic motor repair, like a limit switch replacement or force adjustment, generally falls between $180 and $340. Slide motor service, including rack alignment and gear replacement, commonly lands between $400 and $900. Battery backup installation runs $350 to $800 for most Georgetown properties. These are real ranges for this market, not internet averages. The exact number depends on your gate, your operator, and what actually failed. You get one number, up front, before any work starts. If a bid feels high, bring us the written estimate. We give a free second opinion, and if you have a quote from a competitor, we will tell you honestly whether they are overcharging you or whether the price is fair.
Standing offers for Georgetown customers: $40 off any repair over $200, no trip charge inside the county, free second opinions on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and you will get a live person and a straight answer. To put it plainly: the price is quoted and agreed before any work starts, and that is the number on the invoice.
We Also Serve Cities Near Georgetown
Our Georgetown customers often refer us to family in nearby towns, and we are glad to make the drive. We serve Round Rock, Brushy Creek, Cedar Park, and Hutto with the same live-answer phone line and the same 90-Day Done Right Promise. If you are in one of those communities and your gate motor is acting up, call the same number: (877) 610-2993.
Serving Georgetown, TX - Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Georgetown
Heavy rain in Georgetown swells the caliche clay under your gate posts, which pushes the hinge post out of plumb. The gate then binds against its frame, and the motor has to work harder every cycle until the capacitor blows or the board cooks. The fix is resetting the post footing deeper and leveling the gate so the motor is not fighting the ground. A $250 motor repair without fixing the post becomes another $250 motor repair next rainy season. Call (877) 610-2993 and we will fix the post and the motor in the same visit.
Yes, if the solar panel and battery bank are sized for the gate’s actual weight and width. Many solar openers sold online are undersized for a heavy 20-foot steel gate, especially during Georgetown’s cloudy winter stretches. We size the panel and battery to your gate, not to a generic chart, and we have replaced more than a few under-powered solar installs with systems that actually open the gate every time. If livestock are a concern, we can also set the opener’s sensitivity and positioning to reduce false triggers.
Sun City Texas in 78633 does not mandate a specific motor brand, but it does enforce strict hardware finish standards to match the Del Webb aesthetic. The bronze and wrought-iron finish families approved for that community are specific, and a mismatched hinge or pull can fail inspection. When we work in Sun City, we bring hardware finished for that HOA. That saves you a second trip and a re-inspection.
Livestock trigger gates in Georgetown when the safety photoelectric beams are mounted too low or the loop detector sensitivity is set too broad. A horse nudging a beam or a goat walking through the sensor zone swings the gate repeatedly, which burns through gear sets and batteries. We set beam height and detection loops for the property’s actual animal traffic, and we can add a remote keypad for farm staff so the gate is not cycling open every time a cow wanders near the sensor. Call (877) 610-2993 and we will walk the property with you.
In most Georgetown cases, yes. The sag is almost always in the hinge post, not the middle of the gate, and fixing the post removes the bind that makes the motor grind. We weld on site, so the gate stays in your driveway while we work. If the motor has not been left grinding long enough to strip the gear set, we can often save the operator and get another few years out of it. Replacing the whole operator without fixing the post means doing the same job again in twelve months.
If your gate motor is acting up in Georgetown, call (877) 610-2993. Hal or one of his crew will answer, talk through what is happening, and give you an honest idea of what it will take. Estimates are free, the price is agreed before work begins, and the 90-Day Done Right Promise is in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Georgetown with gate and fence work since 2001.





Before
After
Before
After
Before
After