Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Georgetown
If your automatic gate in Georgetown won’t open from the keypad, won’t close all the way, or keeps reversing for no reason you can see, the most common culprit around here is a gate post that has shifted out of plumb. We fix that in place, often the same day, and we don’t swap parts that don’t need swapping. That’s the short answer. The longer answer is that Gatewood Fence & Gate has been owner-operated since 2001, and our Gate Access Control crew knows the 78626, 78627, 78628, and 78633 ZIP codes well enough to know which neighborhoods sit on the heaviest caliche. Call (877) 610-2993 and a real person picks up, any hour, any day.
Why Gatewood Fence & Gate Is Georgetown’s Preferred Gate Access Control Company
Hal Gatewood’s name is on the shop, not on a franchise agreement. We don’t route your call to a person in another state, and we don’t send a different stranger every time. The person who answers the phone at (877) 610-2993 is someone who can talk through what your gate is doing, over the phone, in plain English. That matters in Georgetown, where a gate that fails at 7 a.m. means you’re stuck on the wrong side of it while the school drop-off line builds up behind you on Williams Drive.
We work on keypads, remotes, phone entry, card readers, video intercoms, and smart access hardware in every corner of Georgetown. But the thing that sets us apart here specifically is that we’re familiar with the builder-grade operators that went into homes in Wolf Ranch and Teravista during the last decade of new construction. Those units fail in predictable ways here. We stock the replacement boards and seals for FAAC, BFT, Linear, and Viking hardware so a repair doesn’t turn into a two-week parts wait.
Our reviews from Georgetown customers, on Google and elsewhere, keep coming back to the same quiet thing: we show up in the window we said we would. No trip charge inside the county, a written price before any work starts, and every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround, no fine print.
Our Gate Access Control Services in Georgetown
Keypad Entry
Adding or repairing a keypad is the single most common access control request we see in Georgetown, especially in Sun City Texas (78633) where courtyard and driveway gates are near-universal. A keypad that eats codes or doesn’t respond in the first press usually means corroded contacts or a failed ribbon cable from the heat, not a dead system. We replace the keypad and test the whole circuit before we leave. Typical keypad replacement in Georgetown runs $180-$320 including the hardware, and adding a new keypad to an existing manual gate starts around $450-$650 with the receiver and wiring.
Remote Control
Remote controls stop working for two reasons around here: dead batteries, or a receiver that has been baked by a Georgetown summer inside a metal box. We reprogram remotes, replace receivers, and add new transmitters for gates that were never set up with more than one opener. A single new remote programmed to your existing operator is usually $60-$120. A receiver replacement runs $140-$220 on most FAAC and BFT models.
Phone Entry
Phone entry and directory systems route visitors from a gate-mounted keypad to your cell or landline, and they need a solid cellular signal plus a clean power feed. In Georgetown, where some of the newer developments west of I-35 have spotty service, we check signal strength before we install anything. Phone entry installation typically runs $850-$1,400 depending on the panel and whether we need to run new conduit. If you have a MyQ or a comparable app, we can often add phone-based opening to your existing system for less.
We quote that price up front, before any work begins. The number we give you is the number on the invoice. Always.
Card Reader
Card readers are common at the community monument entrances in Wolf Ranch and Teravista, but we also install them for individual homeowners who want to hand a card to a caregiver, landscaper, or renter instead of giving out a code that can be shared. A standalone card reader retrofit starts around $600-$900. If you already have a Viking or DoorKing operator, the integration is usually simpler and cheaper than starting from scratch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Georgetown
We’re certified to work on nine major gate brands, and we keep FAAC, BFT, Linear, and Viking parts on the truck for Georgetown service calls because those are the brands we see most often on automated gates in this area’s master-planned communities. FAAC and BFT are especially common at community entrances and HOA monuments. Linear and Viking show up often on residential swing gates. We don’t have to order parts and come back a week later. Usually, the fix is done the same day, with parts that are already here.
Common Gate Access Control Problems We See in Georgetown Homes
- Post shifting from expansive clay. Georgetown sits on the Balcones Escarpment, which means caliche and clay that swell when wet and shrink bone-dry in summer. Gate posts heave, hinges bind, and the operator’s motor fights the geometry until something burns out. This is the most common repeat call we make across Georgetown, and it is much less common in flatter cities to the east.
- Builder-grade operators in Wolf Ranch and Teravista (78628). New construction homes often get the cheapest operator that meets the HOA’s spec sheet. Those units weren’t rated for Georgetown’s sustained 100°F+ days, and we regularly see degraded circuit boards, cracked seals, and burned motors on systems that are only five or six years old.
- Safety photocells that misalign as posts settle. When a gate post moves even a quarter inch, the safety beam across the opening falls out of alignment, and the gate either refuses to close or reverses halfway. That’s not a programming problem. That’s a post problem. We fix the post and re-aim the beam.
- Manual gates in Sun City Texas never plumbed for automation. Plenty of the wrought-iron courtyard gates in 78633 were installed as manual gates decades ago. No conduit, no power run, no operator plate. Adding keypad entry or a card reader means trenching through caliche or surface-mounting raceway along the fence line. We do both, and we’ll show you the difference in cost before we dig.
Pricing for Gate Access Control in Georgetown, TX
You’ll get an exact quote before we start. Here’s what Georgetown homeowners can generally expect. Keypad replacement or addition: $180-$650. Remote programming or replacement: $60-$220. Card reader retrofit: $600-$900. Phone entry system: $850-$1,400. Operator replacement (burned motor or failed board): $650-$1,800 depending on the brand, the gate’s length, and the power draw. Trenching for new conduit runs $35-$65 per linear foot through caliche, with the higher end when we’re cutting through limestone pockets. Every job is priced in writing before we touch a tool. And remember: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Georgetown
Most of our days are spent in Georgetown, but we also run service to Round Rock, Brushy Creek, Cedar Park, and Hutto. If you’re in one of those cities and your gate is giving you trouble, the Gate Access Control in Georgetown crew handles those calls too. Same phone number, same 90-Day Done Right Promise. Call (877) 610-2993.
Serving Georgetown, TX - Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Georgetown
Because your gate posts are sitting in expansive clay that swells after heavy rain and shrinks when Georgetown dries out, which throws the posts out of plumb and makes the gate bind against the hinges or the latch plate. We reset posts with a deeper concrete footing and re-align the operator to match, and that’s usually a one-day repair. Call (877) 610-2993 and we’ll schedule a look.
Yes, but the hardware finish has to match the community’s Del Webb aesthetic, which usually means bronze or a specific wrought-iron family, not whatever generic keypad the big-box store carries. Our crew recently serviced a swing gate in Sun City Texas (78633) where the original builder-grade LiftMaster operator had burned out its motor after years of fighting a hinge post that shifted with Georgetown’s expanding clay. We reset the post with a deeper concrete footing, replaced the operator with an Elite model rated for 100°F+ summers, and matched the HOA’s required bronze finish on the keypad and photocell housing. Give us the HOA spec sheet and we’ll match it.
Because the builder installed the cheapest operator that met the HOA’s minimum spec, and that unit wasn’t built for Georgetown’s heat or the load a full-size gate puts on the motor. We see this constantly in Wolf Ranch and Teravista (78628). The fix is usually an operator replacement sized for the gate, plus a fresh set of safety photocells. We can give you an exact price for your gate before any work starts, and a free second opinion if you have a written estimate from another company.
Three ways. The circuit board gets heat-cycled until a solder joint fails, the rubber seals around the motor and logic board dry and crack, and the motor itself works harder than it should because the grease in a poorly rated unit thins out at 105°F. If your LiftMaster is over five years old and mounted in full sun, we’d rather check the board and seals now than replace the whole unit after a failure. Call (877) 610-2993 with the model number and we’ll tell you if it’s worth servicing.
A gate that opens fine but won’t close, or closes all the way and then reverses. Almost always it’s a photocell that fell out of alignment when a post settled a fraction of an inch into the clay, or a hinge post that needs re-plumbing. It looks like an electronics failure. It is almost always a foundation problem first, and we start there instead of replacing the operator board and hoping. Estimates are free, and the price we quote is the price you pay.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Georgetown since 2001.