Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Briar
Gate repair in Briar usually means one of two things: a swing gate that won’t swing, or an opener that’s given up. Most calls we run out here are long driveway ranch gates and older electric operators that have spent years fighting Wise County clay. A typical hinge and post repair in Briar runs $175-$375, and a full electric gate repair with realignment usually lands between $300 and $650. We answer the phone with a live person around the clock, and we’ll give you a straight quote before any work starts. Call (877) 610-2993 and Hal will tell you what he thinks it is, not what a script tells him to say.
Why Gatewood Fence & Gate Is Briar’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 and he still answers the phone himself half the time. That matters in Briar because the gates out here aren’t cookie-cutter. You’ve got 1980s pipe-frame ranch gates on caliche driveways, 2000s electric swing arms on gravel, and a few newer slide-track setups on the county roads around Eagle Mountain Lake. We’ve worked on all of them. The person who shows up is background-checked, in uniform, and has likely done a dozen jobs within ten minutes of yours.
Every repair carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no phone tree. And the quote he gives you before work starts is the price you pay. The name is on the shop, and the shop is down the road, which means the oldest kind of accountability there is.
We also handle Gate Repair jobs the way Hal has always done them: fix the gate in your driveway when it makes sense, weld on site when steel’s cracked, and don’t swap parts that don’t need swapping. That’s not a sales pitch. It’s just how he’s built the business for 24 years.
Our Gate Repair Services in Briar
Electric Gate Repair
Electric gate repair in Briar usually comes down to one of three things: a control board that’s given up, a motor that’s been fighting a misaligned gate too long, or a safety sensor that got knocked out of line. Older LiftMaster and FAAC boards fail from repeated overcurrent when a gate binds after the clay shifts. We test the whole circuit before we quote you, so you’re not paying for a board when the problem is a bent hinge post 30 feet away.
Automatic Gate Repair
Automatic gate problems on Briar acreage lots are different from what you’d see in a suburban HOA. Long gravel driveways, exposed operators, and yearly freeze-thaw cycles all take a toll. We service Viking, BFT, and Linear operators alongside the bigger names, and we stock common limit switches, control boards, and photocells so we’re not waiting a week on parts from a warehouse. If your gate stopped recognizing the remote, or it stalls mid-travel after a rain, that’s a call we make same-day when we can.
Hinge & Post Repair
This is the one we see most in the 76071. Wise County’s Vertisol clay shrinks in the brutal summer droughts, then swells with the first fall rain. A gate post that was plumb in June can be tilted two degrees by October. That tilt racks the frame, binds the hinges, and stalls a perfectly good opener. We don’t just shim the gate and call it fixed. Hal’s crew digs down past the clay movement zone, pours a new footing when it’s needed, and sets the post so it stays. A gate sags in the hinge post, not in the middle. We start there.
Gate Realignment
Realignment in Briar is almost never a one-time fix on older freight gates and ranch entries. It’s seasonal maintenance. After a dry North Texas summer, the gate sits one way. After a wet fall, it sits another. We measure the frame, set the post, re-square the panel, and reprogram the operator limits so the gate opens fully without dragging. When we’re done, we’ll tell you honestly whether you’re looking at a yearly adjustment or a post that needs a deeper fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Briar
We’re certified to service nine major gate brands, and on Briar jobs we see a lot of LiftMaster, FAAC, and Viking operators on older acreage gates. We also service BFT and Linear systems on newer installs. Because we stock common parts for these brands in our DFW-area shop, we can often have a Briar gate running the same day instead of waiting on a parts drop. If we don’t have it, Hal will tell you straight and give you a timeline he actually believes.
Common Gate Repair Problems We See in Briar Homes
- Clay-heaved hinge posts. Wise County’s shrink-swell soil moves more in a single season than most soils move in a decade. Posts that looked fine all summer tilt after the first real rain, and a swing gate starts dragging or binding mid-travel.
- Failed control boards on legacy operators. Older LiftMaster, FAAC, and DoorKing boards are still out there on plenty of Briar driveways. When motors fight a racked gate for months, the board burns out from overcurrent. We can often retrofit a modern control board without replacing the whole arm.
- Ice-storm damage to exposed gearboxes. Briar sits in the North Texas ice corridor. Freezing rain seizes operator gearboxes and shatters plastic limit-switch housings on exposed ranch gates more reliably than areas closer to the DFW heat island.
- Worn hinges on 30-year-old pipe gates. Those 1980s and 1990s pipe-frame gates are tough, but the hinges weren’t built for decades of abuse. When the hinge pin wallows out, the gate drops, the latch misses, and the whole frame torques under its own weight.
Pricing for Gate Repair in Briar, TX
Here’s what Briar homeowners can expect. A hinge and post reset typically runs $175-$375 depending on post size and footing depth. Gate realignment alone is usually $150-$300 when the post is still solid. Electric gate repair with a new control board lands between $300 and $650. Full weld repair on a cracked pipe frame runs $150-$450 depending on how much steel needs attention. We stand by these ranges because we quote the job in writing before any work starts, and that price doesn’t move at the door. There’s no trip charge inside the county, everyone gets $40 off any repair over $200, and seniors and veterans save 10% on every job, permanently. Call (877) 610-2993 and we’ll give you an exact number over the phone.
We Also Serve Cities Near Briar
If you’re just outside Briar, we run the same local crews to Eagle Mountain, Azle, Saginaw, and Keller. You’ll get the same 90-Day Done Right Promise and the same live person on the phone. Learn more about what we do in Gate Repair in Briar and the surrounding Wise and Tarrant areas.
Serving Briar, TX - Our Local Coverage Area
We’re based in the Briar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Briar
It’s the Wise County clay cycle. All summer, the Vertisol soil under your gate posts shrinks and cracks. Then the first real fall rain comes and the clay rehydrates and swells all at once. That sudden heave tilts hinge posts just enough to rack the frame, and a gate that cleared its stops in August suddenly stalls or drags into the gravel. The fix is a post reset and realignment, not just reprogramming the limits. Call (877) 610-2993 and we’ll set it straight before the next swell.
In most cases you can retrofit. If the motor and gearbox are still healthy, we can add modern safety photocells and a current control board to an older LiftMaster arm. It’s often cheaper than a full replacement, and it brings the gate into compliance with current automatic opener safety rules. When the gearbox is worn to the point of slop, replacement becomes the cheaper answer over two or three repair cycles. Hal makes that call honestly, and the estimate is free.
Yes. Once you put an automatic opener on any gate, it has to meet current safety standards regardless of the gate’s age. That means photocells or contact edges, proper force settings, and audible or visual warning in some configurations. We handle that on every retrofit. A lot of older Briar gates were chained up to openers years ago without safety equipment, and we correct that as part of the repair. Call (877) 610-2993 and we’ll walk through what your setup needs.
On a gate set above the clay movement zone with a proper footing, you might go five to eight years between post adjustments. On a gate with a shallow footing or original 1980s posts, it’s more like every two or three years. We reset a 1990s pipe-frame swing gate on a caliche driveway off County Road 4850 where the original LiftMaster had racked the frame so badly after a fall swell that the gate dragged into the gravel. Hal’s crew pulled the hinge post, poured a new footing below the clay line, and rehung the gate with fresh hinges and realigned limits. That gate hasn’t needed post work since.
The hinge post is structural. The panel is cosmetic. If a gate sags because the post has tilted in swelling clay, shimming the hinges or jacking the panel just moves the problem around. The frame stays racked, the hinges bind, and the opener fights the whole mess until something burns out. A proper fix means resetting the post, then realigning the panel to the new post. That’s the first thing we check on every Briar sag call. If you want a straight answer on which one your gate needs, call (877) 610-2993 and Hal will tell you.
Call Gatewood Fence & Gate for Gate Repair in Briar
If your gate’s dragging, stalled, or just plain done, call us at (877) 610-2993. You’ll get a live person, an honest assessment, and a written price before any work starts. We serve all of Briar, including the ranch acreage off County Road 4850 and the driveways around Eagle Mountain Lake. Hal’s name is on the shop, and he’s been at this since 2001. That’s not marketing. That’s just who you’ll meet.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Briar and Wise County since 2001.