Gate Repair in Keller - Same-Day Repair, Priced Before We Start

Gate Repair in Keller, TX

A gate that won’t close in Keller isn’t an afternoon project. It’s a security gap on a home where HOA architectural standards and Fort Worth Prairie clay both have opinions about how that gate should sit. We’re Gatewood Fence & Gate, and we repair gates in Keller’s master-planned neighborhoods with the understanding that a sagging driveway gate here usually starts underground, not at the hinge. When you call (877) 610-2993, a live person answers. And Hal Gatewood’s name is on every job.

Call (877) 610-2993

Why Keller Homes Are Different

Keller sits on the Blackland/Fort Worth Prairie clay belt, and that clay is the main reason gates here need more attention than gates in sandy-soil towns sixty miles east. The soil swells in wet springs and contracts hard during dry summers. That cycle, repeated year after year, slowly torques brick pillar footings out of plumb. A gate that swung clean in March will drag on the latch by August. You didn’t do anything wrong. The ground moved.

Keller’s housing stock makes it worse. Most homes here were built between the mid-1990s and early 2010s with ornamental wrought iron gates mounted on brick pillars. Those gates are heavy. When the pillar shifts even a quarter inch, the gate frame racks, hinge welds start to crack, and the opener has to work harder every day. Seasonal post realignment and gate rehang aren’t a sales pitch here. They’re the defining repair cycle in this city.

Then there’s the HOA layer. In Keller’s master-planned communities, a repair tech often cannot complete visible work without the homeowner first getting architectural review approval for replacement hardware finish and picket profile. A mismatched powder-coat color or wrong scrollwork style can trigger a compliance notice regardless of how well the gate functions. We match original profiles on every repair so that doesn’t happen.

Gate Repair in Keller

Most gate repairs in Keller come down to two things: metal fatigue at the hinges and posts that have gone out of plumb. We get to both within 24 hours in most cases, because a gate that won’t close isn’t something you should have to live with. Our crew carries parts for LiftMaster, Linear, FAAC, BFT, and Viking systems, and we weld on site so your gate stays in your driveway.

Electric Gate Repair

Keller’s upscale subdivisions came up in the mid-1990s through early 2010s, and so did their electric gates. Wiring that’s been baking inside a brick pillar for 20 years doesn’t fail gracefully. We trace voltage drops, replace corroded photo eyes, and rebuild control boards for LiftMaster and Linear systems that were original to the house. Electric gate diagnosis and repair typically lands between $180 and $400 for most board, sensor, and wiring work. No guesswork, no “let’s just replace the whole operator” unless it’s genuinely fried.

Hinge and Post Repair

Here’s the Keller reality: your gate sags in the hinge post, not in the middle. Expansive Blackland clay swells in wet springs and contracts in summer drought, and that cycle torques masonry pillar footings out of plumb year after year. We weld cracked hinge plates on site, re-set posts with proper footings, and match original decorative scrollwork profiles so the HOA never has a reason to send you a letter. Hinge and post repair with on-site welding usually starts at $300 and can run to $900 when we’re re-setting a masonry pillar footing or matching decorative scrollwork. If the post is beyond saving, we’ll tell you before touching a welder.

Gate Realignment

Most Keller driveway gates need seasonal realignment, not replacement. The soil under a 16-foot iron gate doesn’t move evenly. One corner drops, the latch stops catching, and the gate starts scraping concrete. We re-hang gates, shim hinge barrels, and set the strike plate where it should have been all along. A basic gate realignment in Keller runs $125 to $250 depending on gate length and how far the post has moved. The fix keeps your gate matching the street-facing profile it had when the developer installed it, and it usually buys years before the next soil cycle asks for another tune-up.

We handle Gate Repair of all types, from single-family driveway gates to shared easement gates in Keller’s denser subdivisions.

How fast can you get to a gate repair in Keller?

We typically reach homes in Keller the same day you call, especially in the 76244 and 76248 ZIP codes. Emergency calls from subdivisions along Bear Creek Parkway usually get a visit within a few hours. A live person answers (877) 610-2993 around the clock and gives you a straight arrival window, not a four-hour “we’ll squeeze you in.”

Do you guarantee your gate repair work in Keller?

Every job carries the 90-Day Done Right Promise in writing. If the gate sags, the weld cracks, or the opener misbehaves within 90 days, one call brings us back to make it right. That’s Hal’s name on the invoice, and he doesn’t hide behind a warranty department.

Gate Installation in Keller

Gate installation in Keller means dealing with two realities that don’t exist in most other Texas towns: HOA architectural review boards that care about finish colors and picket profiles, and Blackland Prairie clay that moves enough to twist a brick pillar out of plumb within two seasons. A new driveway gate here requires footings set below the active clay line, or you’ll be realigning it before the paint cures. We measure, quote, and schedule. No same-day installation promises, because this work is measured, ordered, and built to last.

Driveway Gate Installation

Driveway gates in Keller are typically double swing gates hung between brick masonry pillars, and those pillars are the biggest variable on the job. Because Keller sits on the Fort Worth Prairie clay belt, footings set anywhere near the active soil line will heave in wet springs and drop in drought. We dig footings below the active clay line, reinforce with steel, and set the hinge posts so the gate doesn’t bind when the surrounding soil decides to move. A standard double swing driveway gate with ornamental ironwork and two operators runs $5,800 to $9,500.

Pedestrian Gate Installation

A pedestrian gate in front of a Keller home is often just as ornamental as the driveway gate, but it takes far more abuse. It gets opened and closed dozens of times a day by kids, delivery drivers, and the wind. A pedestrian gate that’s hung true and welded properly will outlast one that’s fighting a shifting post. In Keller, we set every pedestrian gate post below the clay line, same as driveway gates. A single pedestrian gate runs $2,200 to $4,800, depending on profile complexity.

Sliding Gate Installation

Sliding gates are popular on wider Keller driveways where a swing gate would eat too much of the turn radius. The problem in this city is the loop detectors, those saw-cut loops in the driveway that tell the gate when a car is waiting. Clay shrinks away from the saw-cut during summer drought, creating gaps that cause detection failures. We install loop detection with the Keller soil cycle in mind. Custom sliding gates start around $5,500 and can go to $14,000 for heavy security gates with automation and matched intercom entry.

Learn more about our approach to Gate Installation.

Can I replace my Keller driveway gate with a different ornamental style without HOA approval?

No. In most of Keller’s HOA-governed master-planned communities, a visible gate replacement requires architectural review approval for the replacement hardware finish and picket profile before work can proceed. A mismatched powder-coat color or wrong scrollwork style can trigger a compliance notice even if the gate works flawlessly. We help Keller homeowners navigate this by matching existing decorative profiles and finishes.

How does Keller’s soil affect underground loop detectors for automatic driveway gates?

Loop detectors rely on saw-cut loops in the driveway, and in Keller’s expansive clay, the soil shrinks away from the saw-cut during dry months. That creates gaps that cause detection failures, the gate starts and stops erratically, or fails to recognize a vehicle entirely. We install loops with depth and sealant adjusted for our clay profile, which prevents the seasonal failures generic installers leave behind.

Gate Motor & Opener in Keller

If your driveway gate in Keller won’t open, grinds halfway, or reverses for no reason, you need a gate motor tech who knows this city’s specific problems. A gate motor repair in Keller typically runs $180-$520 depending on whether we’re replacing a capacitor, a control board, or the entire operator. Most jobs in the 76244 and 76248 ZIP codes are done same-day or next-morning, and we quote the full price before any wrench turns.

Motor Repair

When a LiftMaster or Viking opener starts humming without moving, or works intermittently, we diagnose on site. Common culprits in Keller: capacitor failures from heat cycling, stripped gears from gates that were never balanced after the post heaved, and control boards fried by power surges during North Texas storms. A capacitor or limit switch repair is usually $120-$200. We carry common parts for all nine brands we service, which means most repairs in Keller are one trip.

Motor Installation

Installing a new gate motor in Keller isn’t a swap-and-go job. Many homes here have heavy ornamental wrought iron gates on brick pillars, often with scrollwork that adds weight beyond what the original opener was rated for. We size the operator to the actual gate load, not the old unit’s specs. Full operator replacement, including labor, typically lands at $650-$1,400 depending on brand and whether we’re matching an existing intercom or battery backup setup.

Linear Motor Service

Linear residential gate operators are common in Keller subdivisions because they’re compact and reliable when the gate is properly balanced. But a Linear motor on a gate that’s heaving with the clay soil will fail early. We rebuild and replace Linear arms, swap out broken limit switches, and reprogram travel limits so the gate stops gently instead of slamming the post. If your Linear opener was installed by someone who skipped load calculations, we’ll correct the install and show you exactly what was undersized.

We service all major brands through our Gate Motor & Opener program.

Why does my Keller gate opener need seasonal realignment even if the motor works fine?

Because Keller’s expansive clay soil heaves and contracts with the seasons, which shifts your gate posts out of plumb and pulls the gate out of square. The motor keeps working, but it’s fighting misalignment every cycle, which kills gears and capacitors early. Seasonal realignment of the hinge posts and operator limits is the single most important preventive step for a Keller gate.

My gate reverses for no reason - is that the motor or the safety system?

In Keller, it’s usually the safety system, not the motor. False reversals are most often caused by misaligned photocells, a bent safety edge, or a force setting adjusted too sensitively after a storm knocked something loose. The motor itself could be fine. We test the safety loop, check photocell alignment, and calibrate force settings before we ever recommend replacing a motor.

Gate Access Control in Keller

Gate access control in Keller typically costs $450-$1,800 depending on whether you’re adding a keypad to an existing opener or installing a full video intercom with smart phone entry. Most Keller homes we service were built between 1995 and 2015, so the operators sitting on those brick pillars are usually builder-grade units that were never designed for the clay soil movement we get here. We integrate new access control with existing systems and run conduit properly, not stapled to your brickwork like some of the sloppy jobs we’ve had to redo.

Keypad Entry

Adding or replacing a keypad on a Keller driveway gate runs $250-$600 for most residential systems. The keypad itself is straightforward. What complicates it here is the mounting surface. Your keypad is likely mounted to a brick pillar that’s been shifting on Fort Worth Prairie clay since the subdivision was built. A keypad that’s torqued out of level can have buttons stick, seals crack, and water find its way into the wiring. We level the mount, seal against moisture, and match the finish to your existing HOA-approved hardware.

Remote Control

When your remote stops working but the keypad still functions, Keller homeowners call us first. The usual suspects on gates built during Keller’s fast buildout are simple: a receiver board that’s lost its ground, antenna wire that got pinched when the post shifted, or a builder-grade receiver that was never weather-sealed. Remote receiver repair or replacement in Keller runs $180-$400. We fix the root cause rather than handing you a new remote and hoping it works longer than a month.

Phone Entry Systems

Phone entry systems in Keller are increasingly popular for single-home driveway gates where UPS, FedEx, and guests need access when nobody’s home. A basic phone entry addition starts around $600 and climbs from there depending on whether you want a hardwired line or cellular connection. We integrate phone entry with existing LiftMaster, Linear, and FAAC operators, and we’ll run the conduit properly rather than stapling wire to your brickwork.

See our full Gate Access Control options for Keller homes.

Why does my Keller keypad entry work in dry months but fail after heavy spring rains?

Your keypad is failing after rain because Keller’s clay soil swells when wet, shifting your gate post and stressing the conduit that carries your keypad wiring. Moisture then works into the keypad housing through a seal that’s no longer tight. We fix it by re-leveling the post, replacing cracked conduit, and sealing the keypad mount. Call (877) 610-2993 for a free estimate.

Do I need HOA approval before replacing my gate’s video intercom with a different brand?

In most Keller HOA communities, yes. Any visible hardware on your gate, including a video intercom or keypad, often must match the community’s approved finish profile and design standards. A functional intercom in the wrong color can get you a compliance letter. We’ll help you identify what your HOA requires and stock finishes that pass. Call us before you buy a unit online.

Gate Parts & Welding in Keller

Gate parts and welding in Keller usually means one of three things: a hinge post that’s been pulled out of plumb by shifting clay, a cracked weld on an ornamental picket, or a roller bracket that’s finally given up on a shared driveway gate. Most repairs run $180 to $480 for a single hinge or weld fix, and we can often have it done the same visit. If you’re in the 76244 or 76248 ZIP and your gate won’t close, we bring the welder to you.

Hinge Replacement

Hinge replacement in Keller typically runs $220 to $390 per hinge, depending on the weight of the gate leaf and whether the post itself needs resetting. On the ornate wrought iron gates common in Keller’s 1990s and 2000s master-planned communities, the hinge isn’t always a bolt-on part. It’s often welded to the post face, which means cutting the old hinge free, grinding the post clean, and welding the new one in place while the gate leaf is hung and balanced.

Post Replacement

A sagging Keller gate usually points to the post, not the panel. Fix the panel without the post and you’ll fix it twice. Post replacement in Keller runs $480 to $900 for a typical ornamental driveway gate post, including digging out the old footing and setting the new post below the active clay zone. The clay here, part of the Fort Worth Prairie belt, swells in wet springs and contracts in summer drought, and any footing set in that movement will eventually rack the gate frame out of square.

Custom Welding

Custom welding covers the work that has no part number: a broken scroll, a bent spindle, a missing finial, a gate leaf that needs extension to close a gap that wasn’t there when the house was built. Rates run $120 to $220 per hour, and most Keller custom weld jobs take an hour or two. We do all of it on site in your driveway. We don’t ask you to dismount the gate, load it into a truck, and haul it somewhere. Hal brings the welder and the material to you.

Our Gate Parts & Welding covers everything from emergency hinge fixes to full scrollwork reproduction.

Does Keller require HOA approval before I can weld a visible crack on my driveway gate picket?

It depends on your HOA’s architectural guidelines, but many Keller HOAs require prior review for any visible ironwork repair, including a welded crack or a new hinge, because the finish color and picket profile must match the original. We’ll match the existing powder coat and scrollwork so the repair is invisible, and we can help you prepare the HOA submission if your community requires one.

Why does my Keller swing gate hinge keep breaking at the post after heavy spring rains?

Because the clay under the post is expanding and lifting the footing, which torques the hinge weld until it fails from cyclic stress. You’ll need the footing excavated and reset below the active clay zone, then the hinge re-welded and the gate leaf re-hung. We see this every spring in Keller’s clay-belt neighborhoods. Call us for a post footing inspection before the next cycle makes it worse.

Brands We Service in Keller

We carry parts and stock common components for nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most repairs in Keller are completed in one trip because the part is already on the truck. If we don’t have it, we’ll tell you when it’s coming, not leave you guessing. See our brands for full details.

Pricing for Gate Repair in Keller, TX

Neighborhoods We Serve in Keller

We work throughout Keller’s master-planned communities and established sections, from the older neighborhoods near Keller Town Center to the newer builds along the east side of 76244. Typical response time across these areas is within 24 hours for most repair calls. A live person answers the phone around the clock, so you’ll never sit through a menu.

• Hidden Lakes
• Marshall Ridge
• Willis Creek Ranch
• Bloomingdale Hills
• Stepping Stones

Service Area - Cities Near Keller

We dispatch and schedule from our Dallas-Fort Worth office, with crews serving Keller locally every day. If you’re just outside city limits, we also cover Watauga, TX, North Richland Hills, TX, Roanoke, TX, Saginaw, TX, and Richland Hills, TX. No trip charge inside Tarrant County, and the same upfront pricing applies across every ZIP we serve.

FAQs About Gate Repair in Keller