Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Briar
Gate parts and welding in Briar usually means one of three jobs: a hinge post that the clay has pushed out of plumb, a pipe-frame ranch gate that’s racked itself out of square, or an operator that quit because the gate no longer travels true. We handle all three, and we weld on site so your gate never leaves your driveway. Hal Gatewood has been fixing gates since 2001, and our crew works the long caliche driveways and acreage entrances around County Road 4768, Boyd Road, and Farm Road 730 regularly. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Briar’s Preferred Gate Parts & Welding Company
Briar is unincorporated Wise County, which means no city inspection department and no municipal code office to call when a gate fails. You’re on your own, and that changes who you want standing in your driveway. We’re locally owned and owner-operated. The name on the shop is Hal Gatewood’s, the address is published, and the license number is right there for anyone to look up. The person who shows up for your Gate Installation - Briar knows what Wise County clay does to a gate post, because he’s been fighting it since before a lot of the newer ranchettes went in.
Briar homeowners call us because we repair what other companies want to replace. A sagging gate in this soil isn’t fixed by bolting on a new hinge and calling it done. The post has moved. The frame has racked. If you fix the panel without the post, you’ll fix it twice. Our 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, we make it right. One call brings Hal back, no runaround and no fine print.
We answer the phone with a live person 24 hours a day, seven days a week. No voicemail, no chat bot, no queue three states away. And every job gets upfront pricing quoted and agreed before any work starts. For Briar homeowners, that’s the whole point.
Our Gate Parts & Welding Services in Briar
Most of what we do for Briar acreage properties falls into four buckets. Here’s how each one plays out on the ground here.
Hinge Replacement
Hinges on Briar gates don’t wear out from use. They get destroyed by geometry. When Wise County clay tilts a post even half an inch, the gate leaf hangs crooked, the hinge barrels bind, and the operator starts tripping its overload. It looks like a hinge failure. It’s almost always a post problem that ate the hinge on the way down. We replace with sealed-bearing hinges sized for the gate’s actual weight, not whatever was on the shelf at the big-box store. A typical hinge replacement on a 12- to 16-foot pipe gate in Briar runs $180-$320 per pair, installed and aligned. But we always check the post first, because putting new hinges on a tilted post is throwing money at a symptom.
Post Replacement
This is the single most common call in Briar after the first fall rain. The clay swells, the post shifts, and the whole gate racks out of square. We dig out the old footing, set the post in a deeper concrete collar, and weld a new base plate so it actually resists the clay cycle. A heavy hinge post replacement with concrete work in Briar generally runs $450-$850 depending on depth, gate weight, and whether the old post was set in native clay or a proper footing. The deeper the collar, the fewer times you’ll pay for this twice. In Wise County, it’s the post that carries the gate, not the hinges.
Rail Repair
Pipe-frame ranch gates in Briar take a beating. Cattle lean on them, kids swing on them, and the freeze-thaw cycle flexes welded joints until cracks start at the rail-to-stile connection. We cut out the cracked section, sleeve or replace the rail, and re-weld with the correct rod for the pipe gauge. Most rail repairs run $160-$400 depending on how far the split has traveled. If the gate has racked hard enough to pull the rails out of square, we’ll recommend a post reset before or alongside the rail work. Fix the panel without the post and you’ll fix it twice.
Custom Welding
Not every Briar gate problem is a repair. Sometimes the gate never fit right in the first place, or you need a new section added, a horse panel attached, or a set of rollers fabricated for a slide gate that someone hung too low. We weld on site from a mobile rig, so your gate stays on your hinges while we work. Custom welding work in Briar typically runs $95-$150 per hour, with most smaller fabrications landing in the $250-$500 range once we account for steel and hardware. We quote a firm number before we strike an arc. You’ll know the price before the work starts, and it won’t change at the door.
Trusted Brands We Service in Briar
We’re certified for Briar Gate Motor & Opener service across nine major brands, and in Briar we see a lot of Viking, Ghost Controls, and DoorKing on the long driveway swings and slides. We stock common replacement parts for these locally, so we’re not waiting on a drop shipment from some warehouse while your gate sits half-open and your livestock eyes the gap. When the first freeze of the ice-storm corridor hits and a gearbox seizes up, we can usually have the part in hand and the gate running again fast.
Common Gate Parts & Welding Problems We See in Briar Homes
- Clay-driven post tilt. Wise County’s Vertisol clay shrinks in the summer drought and swells after fall rain. Posts heave, gates rack, and hinges bind. This is the dominant failure mode in Briar and the reason post resets outnumber every other repair here.
- Freezing rain glazing and gearbox seizure. Briar sits in the North Texas ice-storm corridor. Freezing rain glazes bare pipe gates and seizes slide gate gearboxes, while plastic limit-switch housings crack and let moisture into the drive.
- Solar panels starved out by tree cover. Long, tree-lined driveways in Briar mean solar gate openers can’t always get enough sun after a storm system parks overhead. We see heavy gates stuck half-open with solar panels that never recovered charge. We can re-site the panel, add capacity, or run a line to the operator.
- Slide gates that chew rack teeth. When the clay moves under a slide track, the rack and pinion get misaligned, and the teeth start shearing. It looks like a gear problem. It’s a footing problem that ate the gear. We fix the footing and the rack together, not one at a time.
Pricing for Gate Parts & Welding in Briar, TX
Here’s what Briar homeowners can expect to pay for the most common jobs. Hinge replacement runs $180-$320 per pair installed and aligned. Post replacement with a deeper concrete collar runs $450-$850. Rail repair runs $160-$400, and custom welding runs $95-$150 per hour with most small fabrications landing between $250 and $500. What changes the number: gate weight and length, how far the post has moved, whether the footing needs to be dug out, and whether the operator needs re-alignment after the metal work. Every quote is given in writing before any work starts, and that’s the number you pay. We also keep standing offers on the table: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Briar
Beyond Briar proper, our gate parts and welding crew covers Eagle Mountain, Azle, Saginaw, and Keller. The drive out to most of these from the shop is quick, and the same clay and ice-storm issues that shape work in Briar apply right across the Wise County line into these neighboring communities.
Serving Briar, TX - Our Local Coverage Area
We’re based in the Briar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Briar
It’s the clay. The first significant fall rain after a dry North Texas summer rehydrates Wise County’s shrink-swell Vertisol all at once, and posts that shifted during the drought tilt overnight. A gate that cleared its stops in August suddenly drags into the ground or stalls mid-travel. This isn’t a hinge problem or an operator problem. It’s a post footing problem, and the fix is a post reset. Call (877) 610-2993 and we’ll dig it out and set it right.
It can, but only if the panel gets enough sun and the battery stack is sized for the gate’s weight and travel. On tree-lined Briar driveways, we often see undercharged solar systems that stall out after overcast stretches. We can re-site the panel to a clear spot, add a second panel, or run a small line to the operator if the panel simply can’t keep up. The gate never should have gone in without checking the sun path first. Give us a call and we’ll look at what you’ve got.
The gate sags in the hinge post, not in the middle. If you want to stop the sag, pour a proper concrete collar deeper than the shrink-swell zone, use sealed-bearing hinges sized for the gate’s actual weight, and check the post for plumb every fall before the rain arrives. Bolting on a diagonal brace or a wheel won’t fix a post that’s already leaning. Call (877) 610-2993 for an honest assessment.
Yes, they have to. Any automatic gate in Texas needs entrapment protection, which means safety photocells or contact edges that stop and reverse the gate when something blocks its path. This isn’t a code technicality. A heavy ranch gate under power can hurt people and kill livestock. Show me the gate closing on its own and I’ll show you where it’s failing. We always set photocells and safety edges as part of any Gate Access Control in Briar repair or install.
Almost certainly. If the footing under the track settles or heaves, the rack and pinion lose alignment and the teeth shear. Replacing the gear without fixing the footing just ruins another gear. We dig out the footing, re-set the track bed, and only then install fresh rack material. Call (877) 610-2993 and we’ll come read the track.
Call Gatewood Fence & Gate for Gate Parts & Welding in Briar
If your gate is dragging, racked, or stalled on a long Briar driveway, call us. Hal Gatewood answers the phone, or you can drive to the shop and look him in the eye. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Estimates are free. Pricing is quoted before we start and never changes at the door. Call (877) 610-2993 now. We serve Gate Parts & Welding in Briar and the whole 76071 zip code.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Briar since 2001.