Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Andover
Gate repair in Andover usually means one of three things: a gate that won’t open, a gate that won’t close, or a gate that sags so badly it scrapes the driveway. Most calls we take from the 33023 corridor are fixed same-day, and the price is quoted and agreed before any work starts. Salt air from the Atlantic, just a few miles east, eats gate hardware faster here than almost anywhere else in the country. If you’re dealing with a dead operator, a rusted hinge post, or a swing gate that groans every time it moves, call (877) 610-2993 and a live person will answer.
Why Gatewood Fence & Gate Is Andover’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is still on the door and on every invoice. That matters in Andover because most of the gate work here is HOA-governed: community entrance gates, townhome villa gates, gate operators with access-control keypads and loop detectors. When an HOA board calls, they want someone who will show up, do the job, and stand behind it in writing. The 90-Day Done Right Promise is printed on every job ticket. If something isn’t right, one call brings Hal back. No runaround.
Crews reach most of Andover within about an hour because scheduling runs out of our South FL office and the service routes are built around Broward County daily. We answer the phone around the clock with a live person, not a voicemail tree. And we’re locally owned and owner-operated, with a published address and license number anyone can look up. That’s the accountability model a 55-year-old homeowner in a villa community actually wants: a verified name, a face they may see at the hardware store, and a repair-first approach rather than a sales pitch to replace the whole gate.
We also repair what other companies want to replace. Hal has an on-site welding rig, so a rusted hinge or cracked weld gets fixed in your driveway, not hauled to some offsite shop for a week. Andover’s older ornamental iron gates from the 1960s and 1970s are prime candidates for weld-and-repair work. Replacing the whole panel when only the post footing rusted through is what a lazy contractor does. Fixing the post and keeping the panel is what we do.
Key Takeaways
- Same-day gate repair is standard for most Andover calls; we run South FL routes through Broward daily.
- Every price is quoted and agreed before any work starts, with no trip charge inside the county.
- On-site welding keeps your gate in your driveway for most hinge, post, and weld repairs.
- The 90-Day Done Right Promise is in writing on every job.
- Seniors and veterans save 10% permanently, and any repair over $200 takes $40 off.
Our Gate Repair Services in Andover
Electric Gate Repair
Electric gate failure in Andover almost always traces back to two culprits: a corroded control board or a burned-out motor capacitor. The humidity and salt air get into the housing, short the board, and suddenly the gate won’t respond to the remote, the keypad, or the loop detector. We diagnose the actual fault and replace only what’s failed. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry common replacement boards and parts on the truck so most Andover repairs happen in one visit.
Automatic Gate Repair
An automatic gate that opens but won’t close, or closes but won’t latch, is a liability in an HOA community. Andover’s villa and townhome communities rely on automatic swing and slide gates for access control, and when they misbehave, it’s more than an inconvenience: it’s a security gap. We check safety photocells, limit switches, loop detectors, and the operator’s programming. Most automatic gate fixes in Andover run between $175 and $425 depending on whether it’s a sensor alignment or a full control board swap.
Hinge & Post Repair
This is the signature repair in Andover’s 1960s and 1970s concrete-block neighborhoods. The ornamental wrought-iron driveway gates look fine from ten feet away, but the hinge post rots through at the base where water and salt sit against the concrete footing. The gate sags, drags, and eventually won’t latch. We cut out the rotted section, weld in new galvanized steel, use stainless fixings, and re-align the gate. The panel stays original. The post is what fails, and a gate sags in the hinge post, not in the middle. That’s where we start.
Gate Realignment
Realignment is rarely just a bolt adjustment in Andover. The real cause is usually corrosion: a hinge pin eaten down to half its diameter, a roller bearing grinding on rust scale, or a post that shifted in the sandy soil after a heavy storm season. We find the actual cause, repair it, and set the gate back to square so it swings or slides without dragging. Realignment work starts around $120 in Andover and goes up if we’re replacing hinge pins, rollers, or cutting and re-welding a bracket.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Andover
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Andover specifically, we see a lot of Viking and DoorKing operators on HOA community gates from the 1990s and early 2000s, plus Linear units on residential driveway gates. We carry replacement boards, remotes, photo eyes, and limit switches for those brands on our service trucks, so we don’t have to order parts and schedule a second visit for most repairs. If you’ve got a Ghost Controls kit on a newer gate, we handle that too.
Common Gate Repair Problems We See in Andover Homes
- Rusted hinge posts on 1960s and 1970s wrought-iron driveway gates. The panel looks fine, but the post has rotted at the concrete line. We weld in a new galvanized footing and the gate stands straight again.
- Control board failures in HOA community gate operators. Humidity and salt corrosion short the boards, especially after storm season. We replace the board and seal the housing properly so it lasts.
- Slide gates jumping the track or grinding near the end of travel. Salt-air oxidation eats the roller bearings and the track brackets within three to five years. The gate grinds, shudders, and eventually trips its own safety circuit.
- Photocell and loop detector malfunctions after heavy weather. Storm surge and standing water get into the sensor housings, and suddenly an automatic gate won’t close or won’t stay open. We recalibrate or replace the sensors and the gate cycles cleanly again.
Pricing for Gate Repair in Andover, FL
Gate repair prices in Andover run on a real range, and we’d rather give you the numbers up front than make you guess. A simple hinge pin replacement or sensor realignment starts around $120 to $180. A full hinge post repair with cutting, welding, and new galvanized steel typically runs $280 to $520. Operator control board replacement on a Viking or DoorKing swing gate usually lands between $325 and $575 including labor. Full gate panel welding, rust repair, and repainting averages $400 to $800 depending on how much steel needs replacing. Every quote is written and agreed before any work starts, with no trip charge inside Broward County. If you’ve got a written estimate from another company, bring it: Hal will give you a free second opinion and you keep the difference. And remember, $40 off any repair over $200, with a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Andover
Andover sits close to several Broward County communities we cover regularly. If you’re in Andover or the surrounding 33023 corridor, we’re already running calls here most days. We also handle Gate Repair work in Miramar, West Park, Hollywood, and West Hollywood. Same crew, same 90-Day Done Right Promise, same live person answering the phone.
Serving Andover, FL - Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Andover
The short answer is salt air and humidity getting into the control housing. Andover sits a few miles from the Atlantic, and the airborne salt combined with year-round moisture corrodes the board’s solder points and traces far faster than a gate operator installed inland would fail. If the board isn’t sealed, or the housing has a cracked gasket, it’s a matter of time. We replace the board, seal the housing, and use conformal-coated boards where available so the replacement lasts years instead of months. Call (877) 610-2993 and we’ll diagnose it on site.
Almost always, yes. The sagging is rarely the panel’s fault. It’s the hinge post rotting at the base where water and salt collect against the concrete footing. We cut out the rotted section of post, weld in new galvanized steel with stainless fixings, and re-align the gate. The original panel stays. That’s the repair-first approach we’ve used since 2001, and it saves thousands compared to a full gate replacement. We’ll quote the repair in writing before we start.
If your community gate was installed before 1993, there’s a real chance it doesn’t meet the wind-load and lateral-force codes that went into effect after Hurricane Andrew. HOA insurance reviews and county re-inspections flag these gates regularly, and you’ll get a notice asking for documentation or an upgrade. We can inspect the gate, the operator, and the posts, and tell you exactly what’s compliant and what’s not. Often it’s a panel reinforcement and operator replacement job, not a full gate rebuild. Call (877) 610-2993 for a free evaluation, and we’ll help you sort out the compliance documentation.
That grinding and jumping almost always comes from salt-air corrosion on the roller bearings and the track brackets. After three to five years in Andover’s coastal air, the bearings seize up and the gate drags instead of rolling, which makes the motor strain and the gate shudder as it reaches the limit. We replace the rollers, clean and re-set the track, and the gate runs quiet again. If you keep running it while it grinds, you’ll burn out the operator motor too. Call (877) 610-2993 and we’ll fix both if needed.
Possibly, but more often it’s a wet photo eye sensor or a shorted safety circuit from water intrusion. When the safety circuit reads a fault, the operator refuses to close because it thinks something is in the way. The loop detector can also get water in its housing and fail open or closed. We test the photo eyes, the loop detector, and the board, then replace only what’s actually failed. Most post-storm gate failures in Andover are fixed in one visit. Call (877) 610-2993 and we’ll get you closing again.
What Actually Lasts on the Coast: Andover’s Salt-Air Gate Problem
Here’s what we know from nearly two and a half decades of repairing gates in Andover’s 33023 corridor. The communities here, HOA-governed townhomes and villas packed tightly along major access roads, run automated vehicular gates at nearly every entrance. The year-round tropical humidity and the salt-laden Atlantic air just miles east mean gate operators, control boards, and steel hardware corrode and fail at a pace far faster than most of the continental US. It’s not rare for a galvanized hinge pin to be eaten down by half inside three years. Control boards that should last a decade short out in two. Slide gate rollers seize after four. The result is a high, recurring volume of repair calls in a tight geographic footprint.
Andover’s housing stock splits into two groups with different failure patterns. The 1960s and 1970s concrete-block single-family homes often have original ornamental wrought-iron driveway gates that have spent five or six decades rusting in the humidity. The failure there is almost always the hinge post at the base, not the panel. The 1990s and 2000s townhome communities run aluminum and steel swing or slide gates with automated operators and access-control systems, and those fail at the operator, the board, and the roller bearings. Knowing which era your gate came from tells us where to look first.
On a routine call in Andover’s 33023 corridor, we found a 1990s-era aluminum swing gate at a townhome community entrance where the hinge post had rotted through at the base. The gate operator was a LiftMaster LA400 with a corroded control board. We replaced the post footing with galvanized steel and stainless fixings, then swapped the board and recalibrated the safety photocells. The gate now cycles cleanly, and the HOA passed their wind-load re-inspection. That’s the kind of repair that looks like a full replacement to a national company, but it’s a day’s work for us.
The material difference matters, and most homeowners never hear this from a salesperson. Galvanized steel stands up to Andover’s salt air far longer than painted mild steel. Painted steel looks fine new, but once the paint gets a scratch, the salt gets in and the rust spreads underneath. Stainless fixings cost more but they don’t rot and they don’t seize, which means the next repair is a simple adjustment instead of a cut-out job. If you’re getting a post replaced or a bracket welded, ask for galvanized steel and stainless hardware. That spec is what actually lasts on the coast.
Broward County’s post-Hurricane Andrew wind-load ordinances add another layer for HOA communities. Older gates installed before 1993 are frequently flagged as non-compliant during insurance reviews or re-inspections. What looks like a simple hinge repair can turn into a panel reinforcement and operator replacement job because the gate has to meet uplift and lateral-force ratings that didn’t exist when it was installed. We walk the board through what’s actually required, what can be welded and reinforced, and what genuinely needs replacing. No upselling, just straight answers with the code on the table.
So if your Andover gate is sagging, grinding, refusing to close, or the operator is dead after a storm, the fix usually comes down to replacing the part that actually failed with a material that can handle this climate. Not a full gate replacement. Not a sales pitch. Just honest repair work, done in your driveway, with Hal Gatewood’s name on the invoice and the 90-Day Done Right Promise behind it. Call (877) 610-2993 for a free estimate. A live person answers, day or night.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Broward County since 2001.