Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Andover
Gate installation in Andover usually costs between $1,800 and $6,500 for a standard residential driveway gate, depending on whether it’s a swing, slide, or double gate, and whether you need a new operator, Andover Gate Access Control, or just the steel itself. Most jobs we quote in the 33023 corridor get scheduled within three to five business days, and a live person answers the phone when you call (877) 610-2993. Andover isn’t a place where you want a crew that’s never worked around Broward County HOA requirements or salt-air corrosion. Hal Gatewood has been fixing and hanging gates since 2001, and the shop’s reputation is built on showing up when we say we will and standing behind the work in writing.
Why Gatewood Fence & Gate Is Andover’s Preferred Gate Installation Company
Most of the gate work we do in Andover comes from homeowners and HOA board members who’ve already paid somebody else to fix the same gate twice. That’s not a knock on the neighborhood. It’s what happens when you mix 1960s and 1970s wrought-iron gates with South Florida humidity and a few decades of deferred maintenance. We know the townhome complexes along the 33023 corridor, the concrete-block single-family streets where original ornamental gates still hang, and the pre-1993 community entrances that keep getting flagged during insurance reviews. When you call for Gate Installation in this part of Broward County, the person who picks up knows what a post-Hurricane Andrew wind-load ordinance means without you having to explain it.
We’re locally owned and owner-operated. Hal Gatewood’s name is on the shop and on every invoice. A live person answers every call, 24 hours a day, seven days a week, not a voicemail and not a call center three states away. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround. No “up to” language. That’s the whole promise. Andover customers also get our standing offers: $40 off any Gate Repair - Andover over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Our Gate Installation Services in Andover
Swing Gate
Swing gates are the most common style we install in Andover, especially on older concrete-block homes where a driveway is wide enough for a single panel to open inward or outward. A properly hung swing gate in this climate needs a hinge post that isn’t rusting at the footing, and that’s where most old installations fail. We pour new footings when the post is gone, hang hurricane-rated steel when the old iron can’t be saved, and match the operator to the gate’s weight, not the other way around.
Sliding Gate
Sliding gates make sense for Andover driveways where space is tight or where the grade slopes toward the street. The problem we see most often in the 33023 corridor is corroded rollers and tracks. Salt-laden Atlantic air sits on that hardware year-round, and a slide gate that jerks or strains its motor is usually riding on rollers that stopped rolling years ago. We install slide gates with sealed bearing rollers and track systems that can take the moisture, plus operators sized for the actual gate, not the brochure photo.
Double Gate
Double gates, also called bi-parting gates, are common at Andover townhome and villa community entrances. Two panels meeting in the middle means twice the hardware and twice the places where rust and misalignment can happen. When we quote a double gate installation in Andover, we look at both posts, the center stop, the operator arm, and the safety edges as one system. Replacing one panel and leaving the other on a tired post just moves the problem six months down the road.
Pedestrian Gate
Plenty of Andover homes and HOA properties need a separate pedestrian gate next to the driveway, whether it’s a matching steel gate with a keypad or a simpler swing gate for foot traffic. We install and service Gate Installation in Andover jobs that include both the vehicle gate and the person gate, so the hardware matches and the access control talks to the same system. If a pedestrian gate is getting slammed by kids or delivery drivers, we’ll hang it with closers and hinges that hold up to daily abuse.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Andover
We service and install operators from Linear, Viking, and Ghost Controls, along with DoorKing and several other major brands, so Andover customers aren’t locked into one manufacturer’s ecosystem. If you’ve got an old Linear board that keeps throwing error codes, we can diagnose it and replace just the board if that’s the right call. We stock the Gate Parts & Welding - Andover owners actually need, which means less waiting on freight from a warehouse in another state. When a control board dies during a summer thunderstorm, the last thing you want is a company that has to order your part and check back in two weeks. We keep common boards, photocells, and receiver parts on hand, and what we don’t stock we can usually have fast.
Common Gate Installation Problems We See in Andover Homes
- Rusted hinge posts on 1960s and 1970s wrought-iron gates. The panel looks fine until it starts dragging on the concrete. The problem is almost always below grade, where the post has been sitting in damp soil for 50 years. Fix the panel without the post and you’ll fix it twice.
- Pre-1993 HOA gates failing wind-load re-inspections. After Hurricane Andrew, Broward County wrote wind-load requirements that many older community gates never met. Insurance reviews keep turning up non-compliant gates in Andover, and the fix is usually a full panel-and-operator replacement, not a retrofit.
- Corroded slide gate rollers and tracks. Salt-laden air from the Atlantic a few miles east sits on steel hardware year-round. Rollers seize, the rack and pinion grind, and the motor works itself to death against friction that didn’t need to be there.
- Surface-only repairs that ignore the footing. A gate sags in the hinge post, not in the middle. We see gates in Andover that have been “fixed” three times by somebody who tightened a hinge and left the rotted footing alone. That’s not a repair. That’s a delay.
Pricing for Gate Installation in Andover, FL
A basic single swing gate with manual operation in Andover typically runs $1,800 to $3,200 installed. Add an automated operator and you’re looking at $3,500 to $5,500 depending on the brand and gate weight. Slide gates usually run $4,000 to $7,500 with operator and track, because the hardware and the installation are more involved. A double gate or a full HOA community entrance with access control, safety edges, and two operators can run $7,000 to $15,000 or more when wind-load compliance is required. Here’s what we tell every Andover customer: these are real numbers, we quote before any work starts, and the price we quote is the price on the invoice. No adjustment at the door. Call (877) 610-2993 for a free estimate and we’ll give you a written number that won’t change.
We Also Serve Cities Near Andover
We run crews from Andover into the surrounding Broward County communities: Miramar to the west, West Park and Hollywood to the east, and West Hollywood to the north. If you live in one of those cities and need gate work, the same live-answer phone line and the same Andover standards apply. You’ll get the same 90-Day Done Right Promise and the same owner-operated accountability.
Serving Andover, FL - Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Andover
A sagging gate in Andover is almost never about the hinge itself. It’s about the post. When a 50-year-old concrete-block home has an original wrought-iron gate, the hinge post has been sitting in damp, salty soil for decades, and it rusts through at the footing. Tightening or replacing a hinge without addressing the post is a temporary fix that usually fails within a season. The fix starts with the footing. Call (877) 610-2993 and we’ll tell you what’s actually happening below grade before you spend another dollar on surface hardware.
Sometimes we can, and we’ll tell you honestly when we can’t. A pre-1993 slide gate in Andover that’s been flagged for wind-load non-compliance usually cannot be retrofitted to meet current Broward County standards without replacing the panels and the operator supports. If the gate is newer or the failure is just rollers, track, or a control board, retrofitting makes sense and we’ll quote it that way. We’ll never sell you a full replacement when a repair will actually hold. But we also won’t patch a gate that’s going to fail your next insurance review. Free second opinion on any written estimate, so bring us the paperwork from your HOA and we’ll give you a straight answer.
Yes. Every automatic vehicular gate installed in Broward County must meet current entrapment-protection standards, which means safety photocells, contact edges, or both, wired to a reversing operator that stops and reverses when something or someone is in the path. That requirement applies in Andover whether the gate was installed last year or 1988. If your older operator doesn’t have working safety edges or photocells, we’ll install them as part of the job, because a 400-pound gate swinging on a motor without entrapment protection is a serious injury risk. This is not a corner we cut, and it’s not a line item we’ll remove to make the quote look cheaper.
Surge events are one of the most common reasons Andover gate operators stop working between June and November. When lightning strikes nearby or power flickers during a storm, the control board can fry even if the gate itself is untouched. We replace a lot of control boards in the 33023 corridor every hurricane season. If your gate won’t respond or you smell a faint burned odor near the operator after a storm, shut off the breaker and call (877) 610-2993. We’ll diagnose the board, and if it’s dead, we’ll tell you what a replacement costs before we touch anything.
It depends on what has actually corroded. If the panel is sound and the hinge post is solid, replacing hinges, rollers, and the operator can run $800 to $1,800 and buy you several more years. If the post is rotted at the footing or the panel has rusted through at the weld points, retrofitting is throwing money away. A full replacement with hurricane-rated steel and a new operator runs $3,500 to $5,500 for a standard single swing gate in Andover and is the cheaper option over a five-year horizon when the old structure is failing. We’ll show you the condition of your post and panel, in your driveway, so you can see for yourself which side of that line you’re on.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Andover since 2001.