Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Andover
Gate parts and welding in Andover usually means one of two calls: a gate that’s sagging so badly it drags across the driveway, or an HOA entrance that went dead after a storm. Most of what we repair in the 33023 corridor comes down to what South Florida wind and saturated ground do to steel posts, hinges, and welded joints over time. We answer the phone around the clock, we weld on site so your gate stays in your driveway, and we put the price in writing before any work starts. Call (877) 610-2993 and a live person picks up.
Key Takeaways
- On-site welding means we fix the gate where it stands rather than hauling it off to a shop.
- Post footings in Andover fail from tropical downpours long before the steel gives out, which is why we start at the post.
- Pre-1993 HOA gates are routinely flagged during Broward County re-inspections and often need post-and-panel replacement, not just new hinges.
- Every job carries the 90-Day Done Right Promise in writing, and estimates are free.
Why Gatewood Fence & Gate Is Andover’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is on the building and on every invoice. That matters in Andover because the communities off Miramar Parkway and Douglas Road have seen plenty of contractors who quote one number on the phone and show up with another. We don’t work that way. The price we quote is the price you pay, agreed before we touch the gate.
We’re not a corporate outfit. Hal answers the phone himself half the time, and the person who shows up in Andover is background-checked and uniformed, with a truck stocked for the gate brands common in this part of Broward County. Dispatch and scheduling are coordinated from our South Florida office, but the crew that rolls up to your home or HOA entrance works Andover week in and week out.
Andover’s density works in our favor. Because we run so many calls inside the 33023 ZIP, we know the gate types on the townhome communities along Douglas Road, and we know which 1970s-era homes still have original wrought-iron driveway gates that have been rusting for fifty years. That local familiarity means we diagnose faster and quote accurately the first time.
Our Gate Parts & Welding Services in Andover
Most companies want to sell a new gate. We’d rather fix the one you have. This page covers the Gate Parts & Welding work we handle daily across Andover, but the philosophy is the same on every job: repair what’s broken, replace what’s truly spent, and never weld a band-aid over a structural failure.
Hinge Replacement
Andover’s salt-laden Atlantic air eats steel hinges years ahead of their rated lifespan. We see hinge pins seized solid with rust corrosion on gates that are only a decade old. When we replace a hinge in the 33023, we don’t just swap the part and leave. We check the post lean, grind the old weld clean, and set the new hinge so the gate swings without dragging on the drive. A hinge is only as good as the post holding it.
Post Replacement
This is the big one in Andover after heavy rain. Tropical downpours soak the sandy soil, footings loosen, and hinge posts tilt. A gate sags in the hinge post, not in the middle, and that is where we start. We dig the old footing, reset the post in fresh concrete, and often weld a reinforced hinge boss onto the post before rehanging the gate. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Slide gates on Andover townhome communities take a beating from constant cycling and wind exposure. Bent rails, cracked welds at the rail-to-pickup joints, and worn rack-and-pinion teeth are all common failures. We can straighten or replace the rail on site, re-weld the joints, and get the gate rolling smoothly without swapping the whole frame.
Custom Welding
Older ornamental iron gates in Andover are full of tiny stress fractures that rust has widened over decades. We can weld cracked scrollwork, reinforce weak joints, and fabricate custom brackets or hinge bosses that match the existing steel. If the gate is worth saving, we’ll save it. If the steel is too far gone, we’ll tell you straight rather than pad a repair bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Andover
We’re certified to service nine major gate brands, and the ones we see most often in Andover communities are Linear, Viking, and Ghost Controls. We keep common boards, photocells, and hardware on the trucks so a no-power operator or a failed safety edge doesn’t mean a week of waiting for parts. When an HOA entrance gate goes down on a Saturday morning, we can usually have it running the same afternoon.
Common Gate Parts & Welding Problems We See in Andover Homes
- Wind-driven panel fatigue: Broward County’s post-Hurricane Andrew wind-load rules exist for a reason. Solid infill gates catch wind like a sail, and repeated storm cycles crack weld joints at the hinge points. A gate that rattles in the wind is a gate that’s already failing.
- Saturated footings loosening post bases: Days of heavy rain across the 33023 corridor leave the sandy soil loose, and posts start to shift. A swing gate that suddenly drags after a storm usually means the footing moved, not that the hinges wore out.
- Salt-air corrosion on rollers and rack drives: Even a few miles inland, Andover picks up Atlantic salt in the air. Rollers seize, rack teeth strip, and operators burn out trying to push against resistance that shouldn’t be there.
- Pre-1993 gates flagged at HOA re-inspection: Community insurance reviews catch older gates that don’t meet current wind-load requirements. What looked like a simple hinge call becomes a full footing-and-panel replacement once the inspector signs off.
Pricing for Gate Parts & Welding in Andover, FL
Here’s what Andover homeowners and HOAs can expect. Hinge replacement on a standard wrought-iron or aluminum swing gate typically runs $145-$295 including the new hardware and weld work. A post replacement with a new concrete footing runs $380-$700 depending on depth, post size, and whether we need to weld a reinforced boss. Custom welding repairs on ornamental iron run $120-$400 based on the number of cracked joints and the access. Slide gate rail repair or replacement runs $250-$600. Every quote is written, agreed before work starts, and carries the 90-Day Done Right Promise. Call (877) 610-2993 for a free estimate.
Standing offers for Andover customers: $40 off any repair over $200, free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Andover
If you’re in Miramar, West Park, Hollywood, or West Hollywood, we run the same trucks and the same crews. This page is written for Andover, but the gate work doesn’t stop at the ZIP line. Call and we’ll tell you straight what it’ll take to get your gate working again.
Serving Andover, FL - Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Andover
Every automated gate has a manual release, usually a keyed lock or a pull cord on the operator. On swing gates, you’ll find it on the gate arm itself or the operator housing. On slide gates, it’s typically behind a small access door on the motor. Turn the release and you can push the gate by hand. If the release is rusted shut or you can’t find it, call (877) 610-2993 and we’ll walk you through it.
Gates installed before 1993 were built before the county adopted post-Hurricane Andrew wind-load standards. During a community insurance review or re-inspection, older gates are often flagged for insufficient uplift resistance, undersized footings, or panel designs that catch too much wind. The fix usually involves new post footings, a reinforced panel, and sometimes a full operator upgrade. We handle those compliance replacements regularly in the 33023 corridor.
The fix starts at the post. Saturated ground after tropical rain lets the hinge post tilt, and no new hinge will hold a gate true if the post is moving. We reset the footing, correct the post angle, then weld fresh hinges and a reinforced boss so the gate clears the drive without dragging. Just swapping a hinge buys a few months at best. Call (877) 610-2993 and we’ll tell you what your post is actually doing.
Yes, in nearly every case. Photocells take the same humidity and salt exposure as the rest of the gate, and an old set will often fail right after a new operator goes in. When we replace an operator in Andover, we install fresh photocells, test the safety edges, and confirm the gate reverses properly before we leave. It’s part of any operator swap, not an add-on.
Most of the time we can weld it. Cracks at scrollwork joints and hinge bosses are repairable on site. We grind back the rust, weld the joint solid, and treat the area so it holds. If the steel is rusted thin enough to crumble when we test it, we’ll tell you replacement is the honest call. Either way, you get a straight answer. Call (877) 610-2993 and we’ll assess the gate for free.
Call Gatewood Fence & Gate in Andover
If your gate is dragging, stuck open, or dead after a storm, call (877) 610-2993. We’ll give you a straight answer, a written price, and a real person on the line every time. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Andover and Broward County since 2001.