Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Frisco
Gate parts and welding in Frisco usually means one of three things: a hinge that seized up after a clay-soil heave, a post that’s leaning because the ground shifted, or a rail that cracked where two sections meet. We fix all three on site, in your driveway, usually the same visit. Hal Gatewood started this company in 2001, and the name is on the shop. Call (877) 610-2993 and a live person answers, any hour, any day.
Frisco is a specific kind of town for gate work. The master-planned corridors of 75034 and 75035 were built fast in the 2000s, and a lot of those ornamental iron gates went in the same year with the same hardware. That means we see the same failures block after block, and we stock trucks accordingly. If your gate sags or the latch won’t catch, the fix usually starts at the hinge post, not the middle of the panel. Show me the gate closing on its own and I’ll show you where it’s failing.
Why Gatewood Fence & Gate Is Frisco’s Preferred Gate Parts & Welding Company
Frisco homeowners call us because we answer the phone. Not a voicemail, not a call center three states away. A live person, 24/7, who knows gates and can tell you whether the problem is a $40 hinge or a $400 operator board before we even roll a truck. That matters when your gate is stuck open at 9 p.m. and the HOA is going to notice.
Our crew works Frisco every week. We know the subdivisions where the HOA locked gate specs in 2006, the neighborhoods in 75033 where the clay is particularly aggressive, and which streets in 75034 still have the original Viking operators from the mid-2000s. That’s not trivia. It means we stock the right parts before we arrive. Every job carries the 90-Day Done Right Promise in writing, and every estimate is upfront. You’ll know the price before any wrench turns.
Background-checked, uniformed crew members do the work, and Hal himself shows up on plenty of Frisco jobs. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Frisco
Hinge Replacement
Hinges fail first on Frisco gates. Blackland Prairie clay expands in spring rains and shrinks in summer heat, which tilts posts and throws every bit of load onto the hinge barrels. We replace seized hinge pins, weld in reinforced hinge plates, and align the gate so it swings true on the existing post rather than against it. Fix the panel without the post and you’ll fix it twice.
Post Replacement
When a gate post leans more than a few degrees, it’s not a shim job. We dig down, break out the old footing, re-set the post deeper, and pour fresh concrete that can ride Frisco’s wet-dry cycles. In neighborhoods like The Trails of West Frisco, we’ve done post replacement on multiple houses in a single cul-de-sac after a rough spring storm. The clay heaves uniformly there, so the damage is uniform too.
Rail Repair
Rails crack at the weld joints, especially on ornamental iron gates that have been bumped or over-traveled. We cut out the cracked section, prep the surface, and weld in new steel. The repair is stronger than the original if the original sat on a thin factory bead. Powder-coat touch-up comes after, matched to the gate’s existing color.
Custom Welding
Some repairs need more than a replacement part. We weld cracked rails, rebuild broken latch mounts, reinforce sagging gate frames, and fabricate new sections when a gate design isn’t made anymore. All welding happens on site in your driveway. The gate stays where it belongs, and you watch the work happen.
We also handle gate rollers, latches, and locks. Replacement parts, adjustment, and full replacement when the hardware is past saving.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
Most Frisco automated gates run on Viking, FAAC, BFT, Linear, or early LiftMaster residential operators. We’re certified to service nine major gate brands, and we keep common Frisco parts in the truck: Viking hinges for the mid-2000s installs, FAAC and BFT boards for newer systems, Linear remotes and receivers, and BFT actuators for the heavier ornamental iron gates in 75035. When we say we stock parts for Frisco customers, we mean the specific parts Frisco subdivisions actually use.
Common Gate Parts & Welding Problems We See in Frisco Homes
Here’s what we see most, week after week, driving through Frisco’s gated neighborhoods.
- Clay heave tilting hinge posts. Spring rain swells the Blackland Prairie clay; summer drought shrinks it. The cycle throws posts out of plumb, which makes the latch miss or the gate drag on the drive. We re-set posts and realign hinges more in Frisco than anywhere else we work.
- Mid-2000s operators reaching the end of rated cycle life. Viking, US Automatic, and LiftMaster units installed during Frisco’s building surge are now past their rated cycles. HOA rules locked in gate weights and swing radii, so replacements have to match spec. We map which subdivisions share the same operator model so one truck roll can handle multiple homes.
- UV-cracked powder coat exposing weld points. Frisco’s 105°F summers break down powder-coat finishes, especially on south-facing gates. Once the coating cracks, moisture reaches the steel and the weld joints start to rust. We sand, re-weld where needed, and match the HOA’s original color spec.
- Seized hinges on heaved posts. When a post tilts, the hinge barrel gets loaded unevenly and seizes within a season or two. People force the gate, which snaps a weld or bends a rail. Replacing the hinge without fixing the post just buys a few months.
Pricing for Gate Parts & Welding in Frisco, TX
A hinge replacement in Frisco typically runs $160 to $320, depending on whether it’s a single heavy ornamental hinge or a pair of adjustable barrel hinges on a lighter aluminum gate. Post replacement, including new concrete and re-alignment, usually lands between $450 and $900 in Frisco because the clay soil makes us dig deeper and pour wider footings than we would in sandier ground. Rail repair and custom welding jobs start around $180 for a single cracked weld and run up from there based on prep time and finish matching.
| Service | Typical Frisco Range |
|---|---|
| Hinge replacement (single) | $160 - $320 |
| Hinge replacement (pair, ornamental iron) | $280 - $520 |
| Post replacement with new footing | $450 - $900 |
| Rail repair weld | $180 - $400 |
| Custom welding fabrication | $200 - $600+ |
Before any work begins, Hal or one of his crew walks the gate with you and quotes a firm price. That’s the price on the invoice. $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. A free second opinion on any written estimate, too. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Frisco
Our Gate Parts & Welding work takes us beyond Frisco’s city limits on the same day. We serve Prosper, The Colony, Little Elm, and Celina, including the newer gated communities going up along the 380 corridor. The soils are different to the east and west, and we adjust how we set posts accordingly.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Frisco
For most repairs, no. When we’re replacing a hinge with the same size and finish, or welding a crack that doesn’t change the gate’s appearance, it’s maintenance, not modification. If the repair changes the gate’s look, finish, or dimensions, it falls under the HOA’s design review. We can help you figure out which category your repair falls into, and we’re comfortable working with Frisco management companies. When in doubt, show us your HOA’s design guidelines and we’ll tell you what’s needed before we start. Call (877) 610-2993.
Frisco sits on Blackland Prairie clay that expands and shrinks with the weather. When spring rains saturate the soil under one side of a gate post and summer heat dries it out, the post tilts. Whole subdivisions shift together because the soil and construction dates are uniform. That’s why we often fix three or four gates in one cul-de-sac on a single route. We stock matching hardware for the common HOA gate specs, so the fix is fast and the parts match the neighbors’ gates.
Yes, in most cases. We can brace the gate, remove the affected post, re-set it with a deeper footing, and reattach the gate without removing or reprogramming the operator. If the post shift was severe enough to bind the operator arm, we’ll check the arm, brackets, and travel stops before we call it done. We’ve done this on Viking, FAAC, BFT, and Linear operators across Frisco without disturbing the controller settings.
Yes. We keep finish-matching samples for the ornamental iron colors common in Frisco’s 75034 and 75035 subdivisions. Many were installed to the same HOA design spec, so the color and texture repeat across dozens of homes. We can match the existing finish on your gate and touch up weld repairs so the patch isn’t visible. If your HOA has a specific RAL or powder-coat code on file, even better. We’ve matched them before.
No. If the photo-eye is blocked, dirty, or failed, the operator can’t see a person or car in the gate’s path. That’s a safety feature, not an inconvenience. While we’re welding a hinge or replacing a post, we’ll check the photo-eyes, pressure edges, and reversing function. If everything can’t be made safe that day, we’ll lock the gate in manual mode until the parts arrive. Don’t run an automated gate without working safety edges. Call (877) 610-2993 if you’re unsure whether yours are working.
Ready for a Gate That Works Like It Should?
A gate sags in the hinge post, not in the middle, and that’s where we start. If your Frisco gate is sticking, sagging, or welded in a way that looks like the last guy was in a hurry, call us. We’ll be there, fix it in your driveway, and stand behind it with the 90-Day Done Right Promise. Call (877) 610-2993 for a free estimate, and a live person will answer. Not a voicemail. A person. Hal Gatewood’s name is on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Frisco since 2001.