Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Frisco
Gate access control installation and repair in Frisco, TX typically runs $350-$2,400 depending on whether we’re adding a keypad to an existing opener or building out a full video intercom and smart access system. Most keypad and remote control fixes are done in a single visit, and we stock parts for the gate brands that dominate Frisco’s master-planned communities. If your gate won’t open, won’t close, or won’t recognize a code, call (877) 610-2993 and a live person answers. That person works for Gatewood Fence & Gate, not a national call center, and we’ve been repairing gates since 2001.
Frisco homeowners don’t have standard gates. They have HOA-spec ornamental iron gates, matched intercoms, and operators that were installed by the hundreds across entire subdivisions. That uniformity means we can often diagnose your system before we even pull into your driveway, because we’ve already worked on the same setup three doors down.
Why Gatewood Fence & Gate Is Frisco’s Preferred Gate Access Control Company
Hal Gatewood has been owner-operated since 2001, and his name is on every invoice and every truck. When you call about a gate access problem in the 75034 corridor, you’re not calling a dispatch queue. You’re calling a shop that has serviced ornamental iron gates in Stonebriar, The Trails, and neighborhoods across Frisco for years. We know which HOA design rules apply to which subdivision, what color powder-coat was spec’d in 2006, and which Viking or LiftMaster operator is hiding under the control box cover.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, Hal comes back and makes it right. No runaround. We also answer the phone 24/7 with a live person, so a dead gate at 10 p.m. doesn’t mean leaving a message and hoping. And our pricing is stated up front, agreed before any work starts, and never surprises you at the door. You can even drive to the shop and look Hal in the eye if you want to. That’s the kind of accountability we offer in Frisco.
Our Gate Access Control Services in Frisco
We handle the full range of Gate Access Control work on Frisco homes, but in this city the job usually means one of three things: video intercom integration, smart access upgrades, or keypad entry on an ornamental driveway gate that was installed 15 to 20 years ago. Here’s how each one plays out in Frisco specifically.
Keypad Entry
Frisco’s master-planned communities lean heavily on keypad entry as the primary access method for pool gates, pedestrian gates, and driveway gates. The problem we see most in Frisco is sun-damaged keypads. Texas heat degrades the membrane buttons over time, and the keypad stops registering codes reliably. A new outdoor-rated keypad in Frisco typically runs $180-$420 installed, and we always quote the price before we touch the gate.
Remote Control
Remote controls still work fine for most homeowners, but when a Frisco gate operator was installed in the mid-2000s, the receiver it came with doesn’t always play nice with modern multi-button remotes. We can add a newer receiver, program your existing remotes, or set up a dedicated remote for a second vehicle. A remote control receiver upgrade in Frisco generally runs $150-$350.
Phone Entry
Phone entry systems let a visitor call your cell phone from the gate and you open it remotely. This is popular in Frisco for homes with long driveways where a keypad at the curb isn’t practical, or where HOA rules prevent certain hardware mounted on the street side of the gate. Installation of a basic phone entry unit in Frisco runs $400-$900, depending on whether we’re wiring a cellular unit or tying into your existing landline.
Card Reader
Card readers are less common on single-family Frisco homes, but we do see them in gated subdivisions and on properties with separate workshop or ADU access. A standalone card reader installation for a swing gate in Frisco typically costs $450-$1,100. If you’re adding a card reader to an existing operator, we’ll verify the control board has an available accessory input before we quote.
Video Intercom
This is where Frisco really diverges from other DFW suburbs. Many of the ornamental iron driveway gates here were built with matching intercom posts or columns, and the original intercom units are now failing from UV and heat exposure. A new video intercom with a wired or wireless indoor monitor in Frisco runs $800-$2,200 installed, depending on whether we reuse existing conduit or run new low-voltage wire. We always match the finish to your gate hardware so the HOA doesn’t flag it.
Smart Access
Smart access means controlling the gate from your phone instead of a clicker. In Frisco, we frequently add smart controllers to existing LiftMaster, Viking, and DoorKing operators that still work mechanically but lack app support. A smart access retrofit in Frisco typically costs $350-$750. If your operator is a mid-2000s Viking or US Automatic that’s seen better days, we’ll tell you honestly whether a retrofit makes sense or whether you’re better off replacing the operator entirely.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
We’re certified to service nine major gate brands, and in Frisco the ones we see most are Linear, Viking, Ghost Controls, and DoorKing. We keep common boards, remotes, photo-eyes, and keypads for these brands on the truck, because we know what Frisco gates use. When a Viking operator in a 75035 subdivision fails, we don’t have to order parts and come back next week. We fix it that day, which matters when your car is stuck inside the driveway. If we’re installing something new, we’ll spec a brand and model that fits your gate weight, swing radius, and HOA requirements, not whatever happens to be cheapest at the supply house.
Common Gate Access Control Problems We See in Frisco Homes
- Hinge posts shifting with the clay. Blackland Prairie clay swells in the spring and shrinks in the summer, and every wet-dry cycle pushes gate posts a little farther out of plumb. A gate that sags in the hinge post, not in the middle, and that is where we start. Alignment service is the single most common repeat call we do in Frisco.
- Mid-2000s operators exceeding their rated cycle life. Frisco’s building boom put Viking and US Automatic operators on thousands of homes. Those units are now 15 to 20 years old, and motor windings that have baked in 105°F-plus heat for two decades don’t owe anyone anything anymore. Thermal fatigue in circuit boards is the usual failure mode.
- Powder-coat failure on ornamental steel gates. Relentless Texas sun cracks the coating on iron gates, usually first at welded joints and scrollwork. Once the metal is exposed, rust follows. We do on-site welding and refinishing so the gate stays in your driveway instead of getting hauled off to a shop.
- Photo-eye faults that stop the gate halfway. Many “operator board failure” calls in Frisco turn out to be misaligned or sun-cooked photo-eyes. The gate starts closing, the sensor thinks something is in the way, and the gate reverses or stops. We test the UL 325 photo-eyes before we quote a new board, because fixing the wrong part is how you pay twice.
Pricing for Gate Access Control in Frisco, TX
Here’s what you can expect to pay in Frisco for common access control work. These are real ranges based on what we’ve charged in the 75033, 75034, and 75035 ZIP codes recently. The exact figure depends on your existing operator, wire condition, and gate weight, but the price we quote is the price you pay. We agree on it before any work starts.
- Keypad replacement or installation: $180-$420
- Remote control receiver upgrade: $150-$350
- Phone entry system: $400-$900
- Card reader installation: $450-$1,100
- Video intercom installation: $800-$2,200
- Smart access retrofit: $350-$750
- Full operator replacement (with new remotes and photo-eyes): $1,200-$3,500
Those are real numbers, not just “it depends.” If you want an exact quote for your gate, call (877) 610-2993 and we’ll come out and look. Estimates are free, and we offer $40 off any repair over $200. Seniors and veterans get a permanent 10% discount on every job, no haggling required.
We Also Serve Cities Near Frisco
Gatewood Fence & Gate handles gate access control work all around Frisco and the surrounding area. If you’re in Prosper, The Colony, Little Elm, or Celina and your gate actuator or keypad is acting up, the same crew that works in Stonebriar and along Preston Road will come to you. No trip charge inside the county, and the same 90-Day Done Right Promise applies.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Frisco
Your gate posts are shifting because Frisco sits on Blackland Prairie clay, which swells when spring rains saturate it and shrinks when summer heat dries it out. Every wet-dry cycle moves the post footings a little more, and over years the gate binds, sags, or stops latching. The fix is re-setting the posts in properly prepared footings, not just cranking on the hinges again. Call (877) 610-2993 and our crew will correct the footings so the gate stops moving with the seasons.
Start by reading your subdivision’s design guidelines, but honestly, we can tell you faster. We’ve worked in enough Frisco neighborhoods across 75035 to know which operators were spec’d during each building phase. If your HOA locked in a specific Viking or US Automatic model, we’ll tell you before we quote a replacement. A new operator that violates HOA spec means you pay twice and fight your HOA. Call (877) 610-2993 and we’ll help you figure out what’s allowed on your street.
In most cases, yes. The key is matching the finish, mounting style, and profile of the intercom to the existing gate hardware and your subdivision’s design language. Many Frisco HOAs in the 75034 corridor require intercoms to match the gate’s powder-coat color and sit at a specific height. We’ve done enough of these to know what typically passes review. The safest path is to send us your HOA’s gate spec sheet before installation. Call (877) 610-2993 for a free site visit and we’ll tell you exactly what we’d recommend.
Most of the time it’s a sensor issue, not the board. The photo-eyes at the base of the gate are exposed to Frisco heat and direct sun, and over time their lenses cloud, their mountings shift with the clay, or the wiring connections corrode. The gate thinks something is in the path and stops as a safety response. We test the UL 325 photo-eyes and all limit switches before we condemn a board, because a new board on a gate with bad photo-eyes won’t fix anything. Call (877) 610-2993 and we’ll find the actual fault.
A properly installed residential gate operator in Frisco should last 12 to 18 years, but the mid-2000s Viking and US Automatic units installed during Frisco’s building boom are now past that window. Heat accelerates component aging, so a unit that survived 20 Texas summers is already on borrowed time. If yours is original to a 2005-era home in 75035, we’d recommend budgeting for a replacement rather than chasing one board failure after another. Call (877) 610-2993 for an honest assessment, not a sales pitch.
Call Gatewood Fence & Gate for Gate Access Control in Frisco
If your Frisco gate won’t open, won’t close, won’t take a code, or the intercom is dead, call us at (877) 610-2993. A live person answers, 24/7. We’ll come out, look at the gate, tell you what’s wrong, and quote a fixed price before we start any work. Free estimates, no trip charge inside the county, $40 off any repair over $200, and a standing 10% discount for seniors and veterans. The 90-Day Done Right Promise is on every invoice in writing. Hal Gatewood has been at this since 2001, and he stands behind every gate we touch.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Frisco and the surrounding DFW area since 2001.