Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Celina, TX
Gate repair in Celina typically costs $150 to $900 depending on whether we’re adjusting a hinge on a ranch gate or replacing a control board on a two-year-old automated system in Light Farms. Most repairs are quoted and completed same-day, and we answer the phone with a live person at (877) 610-2993 around the clock. Celina’s unique mix of legacy agricultural gates and new HOA-mandated iron automation means no two jobs are the same, and we carry parts and welding gear for both.
Why Celina Homes Are Different
Celina sits at the active frontier of DFW’s northward growth, where former ranch and farmland is rapidly converting into master-planned HOA communities. That creates an almost unique dual market: legacy agricultural swing gates and cattle-style hardware on older acreage lots exist side-by-side with brand-new automated decorative iron gates in developments like Light Farms and Mustang Lakes. No neighboring city has this same scale of simultaneous rural-to-suburban gate conversion happening right now.
The soil makes the work harder here than anywhere south of us. Collin County’s expansive black clay shrinks and swells with every seasonal moisture swing, and Celina gets it worse than Frisco or McKinney because the ground is freshly graded and hasn’t stabilized. Dry summers pull moisture out and the clay contracts; wet springs saturate it and it swells. Gate posts heave, lean, and shift enough to throw latches and automation arms out of alignment on an annual cycle. We regularly see gates that are only two to four years old already binding or dragging because the post moved, not because the gate failed.
HOA covenants add another layer. Communities like Light Farms and Mustang Lakes mandate specific gate styles, finishes, and heights, and some require pre-approval for repairs that change appearance. We know those rules and keep the paperwork straight so you don’t get a violation letter two weeks later.
Gate Repair in Celina
Gate repair in Celina usually means one of two things: a sagging hinge post on a two-year-old automated gate in Light Farms, or a 40-year-old cattle gate on a former ranch lot that hasn’t closed right since the last big rain. Both are common here, and both need a different fix. We know the difference because we’ve watched farmland turn into subdivisions and we’ve repaired gates on both sides of that line. Hal Gatewood’s crew carries parts for nine major brands and a welder for the jobs that can’t be fixed with a bolt-on part.
Electric Gate Repair
Electric gates in Celina fail for predictable reasons. The freshly graded clay lots under newer subdivisions shrink and swell with seasonal moisture swings, throwing the gate out of plumb, making the operator work harder, and burning out the motor. We diagnose the whole system: the panel, the operator, the safety photocells, and the ground under the post. A two-year-old operator that keeps throwing error codes is usually not a brand problem - it’s a post problem, and we fix it before we sell you a motor you don’t need. Electric gate repair on a modern operator typically runs $180 to $450 for most board, sensor, or limit-switch replacements.
Hinge and Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Celina’s expansive black clay is harder on gate posts than almost any soil in the metro area. On newer lots where the ground was graded two or three years ago, we see posts out of plumb by a full inch or more. We re-set them in deeper concrete footings with gravel drainage so they don’t move again next spring. A typical hinge post re-set on a swing gate in Celina runs $350 to $700, depending on post depth and whether the footing needs replacing.
Gate Realignment
Show me the gate closing on its own and I’ll show you where it’s failing. Realignment in Celina means measuring the post’s plumb line, checking whether the concrete footing has shifted, and verifying that the latch and operator are both working on the same geometry. If the post moved, realignment without re-setting the post is temporary. We do both on site, and we quote the work before we start. Gate realignment alone is usually $150 to $300.
We handle Gate Repair of every type in Celina, from legacy ranch gates to the newest automated systems. Every job carries our 90-Day Done Right Promise in writing, and we take $40 off any repair over $200.
Why is my two-year-old automated gate in Celina already sagging or binding?
Your gate is almost certainly fine. The ground under the hinge post is not. Celina’s black clay shrinks in dry weather and swells when it rains, and on a freshly graded lot, that movement can pull a post a full inch out of plumb within two or three years. The gate then binds, the operator strains, and error codes start. The fix is a re-set hinge post with a deeper footing and proper drainage.
Can you retrofit an old ranch gate with modern safety sensors?
Sometimes, yes. If the gate has a functioning opener and a control board that accepts safety inputs, we can add UL 325-compliant photocells and safety edges. If the control board is obsolete or the operator predates modern entrapment standards, a retrofit may cost more than replacing the operator, and we’ll show you both numbers before you decide. Safety is not optional, and we won’t pretend an old board is safe when it isn’t.
Gate Installation in Celina
Gate installation in Celina usually costs between $2,800 and $9,500 depending on whether you’re putting automation on an existing ranch gate or hanging a brand-new decorative iron double gate in one of the new HOA communities. We’re based out of the Dallas-Fort Worth metro office and run crews into Celina every week, so we know exactly what this town’s soil does to a post footing. Every installation is measured, quoted in writing, and scheduled - we don’t promise same-day installation because this work is measured, ordered, and built to last.
Driveway Gate Installation
A driveway gate in Celina has to do more than look good. It has to survive Collin County’s black clay heaving against the post footings every wet-dry cycle. We dig deeper than the builder did, set posts in concrete with gravel drainage at the base, and make sure the gate hangs true before we ever touch the operator. A single swing gate with automation on a new post typically runs $3,200 to $5,800.
Swing Gate Installation
Swing gates are the most common style in Celina’s master-planned communities. HOA covenants usually mandate decorative wrought iron or aluminum with a specific finish and height, and we install to those specs every day. But generic installers miss the settling clay under new builds. We set swing gate posts deeper with reinforced footings designed for expansive soil, not for a showroom floor. A double driveway gate with dual operators runs $6,500 to $9,500.
Automation Retrofit
Adding automation to an existing sound gate is common on Celina’s converted acreage properties. The gate itself may be solid, but the post and hinge setup was never meant for an operator. We check the post first, reinforce or replace it if needed, then install the motor with proper safety edges and a clean power run. An automation retrofit on an existing sound gate typically runs $1,400 to $2,600.
We cover Gate Installation from new builds to ranch conversions, and we quote every job in writing before any work starts.
Why does my brand-new automated gate in Celina already bind or drag after just two years?
Your gate is binding because the post footing shifted. The freshly graded black clay under Celina’s new subdivisions heaves when it gets wet and shrinks when it dries, and a shallow builder-grade footing cannot hold against that. We re-set the post deeper with gravel drainage and re-hang the gate so the operator and safety edges track correctly.
Do Celina HOAs require specific gate materials or operators?
Most Celina HOAs, especially in Light Farms and Mustang Lakes, require decorative wrought iron or aluminum gates with a specific finish, height, and setback. We install to those covenants daily and know how to match the finish so you don’t get a violation letter. Bring us your HOA’s gate spec and we’ll quote to it exactly.
Gate Motor & Opener in Celina
A dead gate motor in Celina rarely announces itself politely. You hit the remote, nothing moves, and now you’re either late for work or stuck deciding whether to leave the gate open while you’re gone. Gate motor repair in Celina typically runs $185 to $480 depending on the failure, and most jobs can be diagnosed and fixed the same day. We service nine major brands and carry common parts in the truck.
Motor Repair
Most motor repairs in Celina are diagnosed within an hour. Common failures are worn capacitors, fried control boards, stripped gears, and limit switches that have drifted from the gate banging in the wind. We rebuild and replace on site. If the motor housing is solid and the board is the problem, we swap the board rather than selling you a whole new operator. A motor diagnosis and minor repair like a capacitor or limit switch adjustment runs $185 to $285.
Motor Installation
A new gate motor installation in Celina runs $1,200 to $3,800 depending on gate weight, swing versus slide, and whether you need new safety edges and a battery backup. The big HOA communities in 75009 usually require specific operator types for decorative iron gates, especially in Light Farms where architectural guidelines dictate what can be mounted on the gate face. We handle the motor, the arms, the safety sensors, and the programming. A full operator replacement on a swing gate typically runs $1,200 to $2,400.
Linear Motor Service
Linear operators are the workhorses of slide gates across Celina’s acreage properties and newer community entrances. A Linear motor replacement in Celina typically runs $800 to $1,800 installed, including chain or belt adjustment and travel limit calibration. We carry Linear parts in the truck, and we’ve fixed enough of them that we can usually tell you over the phone whether it’s worth repairing or replacing before we even see the gate.
We handle Gate Motor & Opener service for every major brand, and we don’t charge a trip fee inside the county.
How fast can you get to Celina for a gate motor emergency?
We can usually have someone at your gate within a few hours of your call, often faster. Celina is on our regular service route, so our trucks are in the area most business days. For after-hours calls, a live person still answers and can schedule the soonest available crew. Call (877) 610-2993 and we’ll tell you exactly when to expect us.
Does your warranty still apply if the motor fails after the gate shifts again?
Every job carries our 90-Day Done Right Promise in writing. If the motor we installed fails within that window because the post shifted again, we come back and make it right. For ongoing soil movement after that, we’ll give you honest advice on whether the gate post itself needs to be reset or reinforced.
Gate Access Control in Celina
Gate access control in Celina means keypads, remotes, phone entry, card readers, and video intercoms on gates that face a very specific set of conditions: freshly graded black clay, brand-new HOA communities, and older ranch gates that were hung long before anyone expected them to open with a phone. We know exactly what happens to gate automation when expansive clay heaves under a two-year-old post and throws the whole system out of alignment.
Keypad Entry
Keypad entry is the most common entry method in Celina’s HOA communities. We install new keypads, replace worn-out ones, and reprogram them when codes stop working. In Light Farms specifically, we regularly see keypads that accept the code but can’t release the gate because the post has shifted and the operator’s rack and pinion is binding. We fix the post and the alignment, not just the keypad. Keypad replacement or reprogramming runs $125 to $275.
Remote Control
Remote entry means vehicle remotes, HomeLink, and wireless key fobs for swing and slide gates. If your remote works only when you’re three feet from the receiver, the antenna placement or receiver board may be the issue. If it worked yesterday and not today, the operator itself may have lost a board. We diagnose both and replace what’s actually failed. Remote control addition or reprogramming is $45 to $95 per remote, including programming.
Phone Entry Systems
Phone entry systems let you open the gate from a call or app. In Celina, these are common on both new builds and upgraded ranch properties. We install cellular and VoIP-based systems, and we fix existing ones that stopped dialing through. If your system works on one carrier but not another, the cellular board is usually the culprit. A new phone entry system install runs $450 to $900 for a cellular or VoIP entry system, including wiring and programming.
We cover Gate Access Control of every type in Celina, and every quote is agreed before we start.
My gate has a loop detector but only opens sometimes. What’s wrong?
The loop is usually detecting poorly, not failing completely. On long gravel driveways and irregular approach angles common on Celina’s acreage lots, the vehicle doesn’t always sit directly over the loop when the detector reads it. It can also be a sensitivity setting, a cracked wire run, or a control board losing its loop input. We test the loop, the wiring, and the board to find the real problem.
Can you install a phone entry system on an old ranch gate?
Yes, if the gate structure and operator can support it. We install cellular and VoIP phone entry systems on converted ranch properties in Celina regularly. The job usually involves upgrading the operator to a board that accepts the entry system’s release signal, running low-voltage wire in conduit, and programming the system. We quote the full job in writing before we start.
Gate Parts & Welding in Celina
Gate parts and welding in Celina usually means one of three things: a hinge post that’s leaning, a latch that won’t catch, or a weld that finally let go. Most jobs run $180 to $480 for a single hinge or latch repair, and a full custom welding fix on a decorative iron gate typically lands between $350 and $900 depending on how much of the frame needs rebuilding. We weld on site so the gate stays in your driveway, and we quote every job in writing before we strike an arc.
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. In Celina, hinges on heavy iron and ranch-style gates take a beating from wind and soil movement. We replace worn or bent hinges with heavy-gauge steel, re-hang the gate so it swings level, and set the post right if it’s leaning. A typical hinge replacement in Celina runs $180 to $320 per hinge, depending on gate weight and access.
Post Replacement
This is the job we do most often in newer Celina neighborhoods. The freshly graded clay under many Light Farms and Mustang Lakes lots hasn’t finished settling, and the hinge posts move with it. We dig out the old post, set a new steel post in deeper concrete, and re-hang the gate so the latch and operator align cleanly. Fix the panel without the post and you’ll fix it twice. Post replacement in Celina usually runs $450 to $1,100, depending on whether it’s a single hinge post or both posts on a double gate.
Custom Welding
Not every gate repair is a bolt-on part. Custom welding covers rebuilding a bent frame, adding a receiver for a new operator, extending a driveway gate that no longer fits the opening, or converting a ranch-style gate to work with an automated system. We weld aluminum, steel, and iron, and we do it in your driveway. Custom welding jobs in Celina start around $300 and run up from there depending on materials and complexity.
We handle Gate Parts & Welding for every gate type in Celina, from ranch gates to HOA-mandated iron.
Why does my two-year-old automated gate in Light Farms already need hinge-post work?
Because the expansive black clay beneath your lot was freshly graded during construction and hasn’t finished settling. Dry summers pull moisture out and the soil shrinks; wet springs saturate it and it swells. That movement is enough to lean a hinge post half an inch within two years, which throws the latch and operator out of line. We see this at scale in Light Farms and Mustang Lakes.
Will my HOA approve a welded repair that changes the gate’s appearance?
Most Celina HOAs approve repairs that match the original design, and that’s what we do. We match materials, finish, and height so the repair blends with what’s already there. If your HOA or management company needs documentation, we provide written descriptions and photos before work begins, and we coordinate directly with the management company when a shared entry or common-area gate is involved.
Brands We Service in Celina
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common Linear, Viking, Ghost Controls, and DoorKing parts in our service trucks for Celina calls, which means most repairs don’t wait on a parts order. Turnaround on brand-specific motor or board replacements is usually same-day or next-day if we have it in the van. See our brands for full details on each line.
Pricing for Gate Repair in Celina, TX
| Service | Typical Range in Celina |
|---|---|
| Hinge replacement (per hinge) | $180 - $320 |
| Gate realignment | $150 - $300 |
| Electric gate repair (board, sensor, limit switch) | $180 - $450 |
| Hinge post re-set | $350 - $700 |
| Control board replacement | $500 - $900 |
| Legacy ranch gate retrofit (safety edges, photocells) | $600 - $1,200 |
| Single swing gate with automation (new post) | $3,200 - $5,800 |
| Double driveway gate with dual operators | $6,500 - $9,500 |
| Automation retrofit on existing gate | $1,400 - $2,600 |
| Motor diagnosis and minor repair | $185 - $285 |
| Full operator replacement (swing gate) | $1,200 - $2,400 |
| Linear motor replacement (slide gate) | $800 - $1,800 |
What pushes price up in Celina is almost always the soil: posts that need deeper footings with gravel drainage, or gates that require re-hanging before the operator can be fixed. The price we quote is the price you pay. We don’t charge a trip fee inside the county, we take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount.
Neighborhoods We Serve in Celina
We work throughout Celina and the surrounding acreage, and we typically have a crew in the area within a day or two for non-emergency calls. Emergency gate failures - the kind where the gate won’t close and a dog or a pool is on the other side - get moved to the top of the list.
- Light Farms
- Mustang Lakes
- Carter Ranch
- Bluewood
- Properties along FM 428 and FM 455
Service Area - Cities Near Celina
We run crews from our Dallas-Fort Worth office into Celina every week, and we cover the full northern corridor without a trip charge inside the county. If you’re near Celina, we also work in Prosper, TX, Frisco, TX, Melissa, TX, Fairview, TX, and McKinney, TX. Every one of these cities gets the same live-answer phone, upfront pricing, and 90-Day Done Right Promise.
Serving Celina, TX - Our Local Coverage Area
Gatewood Fence & Gate crews serve Celina and the communities around it; dispatch is coordinated from our Dallas-Fort Worth office. The map shows the Celina coverage area; if your address is on it, we can help.
Also serving nearby: Celina, TX, Prosper, TX, Frisco, TX, Melissa, TX, Fairview, TX, McKinney, TX.
FAQs About Gate Repair in Celina
Yes. We work throughout the 75009 zip code, including Light Farms, Mustang Lakes, Carter Ranch, and the acreage homes along FM 428 and out toward the county line. No trip charge inside the county means it costs you nothing extra to have us come out, whether you’re in a gated subdivision or on ten acres.
Most residential gate repairs in Celina do not require a permit. Full replacements or new installations may need a permit from the city, and HOA communities often require pre-approval for any work that changes the gate’s appearance or footprint. We know the common HOA covenants in Celina’s master-planned communities and will flag any paperwork you’ll need before we start.
Call (877) 610-2993 any time - a live person answers 24 hours a day, seven days a week. We’ll ask what the gate is doing or not doing, give you a straight price range, and get you on the schedule. For emergency repairs, we prioritize same-day response. For installations and non-urgent work, we schedule a free measure and written quote at your convenience.
Call (877) 610-2993 for a free estimate. The price is quoted and agreed before any work starts, and every job carries our 90-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Celina Customers Say
"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly