Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Crowley
If your gate is dragging, sagging, or the hinges have torn loose from the post, you need a welder who understands why it happened in the first place. In Crowley, the answer is almost always the ground under your gate. The Blackland Prairie clay across 76036 shrinks and swells so aggressively that posts set in standard concrete collars lean within a few seasons. We fix the post, the hinge, and the weld the right way so you’re not calling us back for the same problem next spring. Call (877) 610-2993 and Hal or one of his crew will come out to your place in Crowley and put eyes on the gate before anyone quotes you a dollar.
Why Gatewood Fence & Gate Is Crowley’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and the name is still on every invoice. That matters in a town like Crowley, where the neighbor who fixed your gate three years ago is the same guy you’ll see at the feed store next week. We weld on site, in your driveway, so the gate never leaves your property and you can watch the work happen. Most repairs in Crowley are done in a single visit.
We answer the phone with a live person around the clock. Not a call center, not a voicemail black hole. When you call at 8pm because your gate won’t close and the dog is loose, a real human picks up. Crews are based out of our Dallas-Fort Worth office and serve Crowley daily, so response time is measured in hours, not days. Published address, license number, and a face you’ll actually meet. That’s the oldest accountability there is.
We Fix What Other Companies Want to Replace
A sagging gate does not mean you need a new gate. A cracked weld does not mean you need a new panel. We see this constantly in Crowley, where national outfits quote a full replacement because it’s easier for them than actually repairing on site. Hal’s repair-first approach means we weld the crack, replace the hinge, reset the post, and keep your gate swinging. And every job carries the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. Plain and simple.
Our Gate Parts & Welding Services in Crowley
Most of our work in Crowley comes down to three things: posts pulling out of plumb, hinges tearing loose, and welds cracking from repeated flexing. Here’s how we handle each.
Post Replacement
This is the defining gate repair in Crowley, and it is directly tied to your soil. Concrete collars on Blackland Prairie clay heave and shift through North Texas wet-dry cycles, and a post that was plumb in January can be leaning hard by July. We dig out the old post, bore a deeper bell-bottom footing that actually anchors below the shrink-swell zone, and set the new post so it stays put. Fix the post and the gate will follow. Skip the post and you’ll fix the gate twice.
Hinge Replacement
Hinges on Crowley gates take brutal abuse. Wide ranch gates on legacy acreage parcels off FM 1187 and Crowley Road flex with every wind gust and every thermal cycle, and the hinge welds eventually crack or the barrel itself wears egg-shaped. We match the hinge weight class to the gate span, weld it on site, and shim the post if needed. No hauling your gate to a shop. No swapping in universal parts that don’t fit your setup.
Rail Repair
Top and bottom rails fail in predictable ways on Crowley’s ornamental iron gates. We see hairline cracks at the weld joints from years of minor movement, and we see complete separations on ranch gates where the bottom rail took one too many hits from a mower or a broadside wind. Cutting out the cracked section and welding in new steel on site costs a fraction of replacement and keeps the gate looking original. The fix is structural, not cosmetic, and the 90-Day Done Right Promise applies the same as any other job.
Custom Welding
Not every gate repair fits a standard part. When a latch tab breaks off an ornamental iron pedestrian gate, or a hinge plate tears out of a tube frame, we fabricate the bracket or mount from steel on the truck, in your driveway. For Crowley homeowners with estate entrance gates, we also custom-build brackets for solar panels, keypads, and vehicle detection loops when the original mounts have failed. If it’s steel and it belongs on a gate, we can weld it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crowley
We’re certified to service nine major gate brands, and around Crowley we see a lot of FAAC and BFT operators on subdivision swing gates, plus Linear units on older ranch entrances. We keep common boards, limit switches, receiver components, and capacitor kits stocked locally so a repair off Crowley Road isn’t waiting on a part shipped from three states away. Solar setups, AC-powered operators, slide gate motors, intercom panels: if it opens a gate, we can usually have it running again the same day.
Common Gate Parts & Welding Problems We See in Crowley Homes
- Hinge posts heaving out of plumb. On the Blackland Prairie clay that runs through 76036, posts set in shallow concrete collars shift within a single wet-dry cycle. We pulled up to a 2018 tract home off FM 1187 where the ornamental iron swing gate had sagged so badly it dragged across the driveway. Our tech found the hinge post rocked out of plumb in the expansive clay, not just a worn hinge. We replaced the post with a deeper bell-bottom footing, welded a new hinge assembly, and got the gate swinging clean without touching the panel.
- Weld cracks at the hinge post on wide ranch gates. Legacy acreage parcels around old town Crowley still run heavy pipe-frame gates that span 12 to 16 feet. As the post shifts through wet-dry cycles, the gate flexes and micro-cracks form at the weld. Eventually a hinge tears free under its own weight.
- Solar gate openers failing during cloudy winter stretches. Long rural driveways without grid power rely on solar panels, but North Texas winter cloud cover starves the low-voltage components. Gates stall mid-travel and the homeowner is left manually dragging a 400-pound gate in the cold.
- Worn rollers on subdivision slide gates. Newer homes in planned communities off FM 1187 run slide gates on track rollers, and those rollers grind down fast in Crowley’s silty clay dust. When the gate starts jerking or reversing, the rollers are usually the culprit. Replacing them early saves the motor.
Pricing for Gate Parts & Welding in Crowley, TX
Here are real numbers for the Crowley market, though the exact figure depends on your setup and what we find when we open it up.
- Post replacement: $350-$900 depending on post size, depth, and whether we’re setting a bell-bottom footing. The deeper footing is standard on Crowley’s clay, not an upsell. It’s the only way the post stays put.
- Hinge replacement: $120-$350 per hinge for ornamental iron and estate gates. Weld-in barrel hinges run toward the higher end. Bolt-on adjustable hinges toward the lower.
- Weld repair (crack or broken rail): $150-$450 per section. Price depends on how much steel we’re cutting out and re-welding, and whether the gate needs bracing while we work.
- Latch and lock replacement: $90-$280 depending on the hardware and whether we’re welding a new tab or retrofitting a maglock.
- Custom bracket or mount fabrication: $80-$300 depending on the complexity and steel used.
You’ll get a firm written price before any work starts, and that price will not change at the door. No trip charge inside the county. Seniors and veterans take 10% off every job, permanently, and any repair over $200 gets $40 off. Call (877) 610-2993 for a free estimate, and if you already have a written quote from another company, bring it. We’ll give you a free second opinion.
We Also Serve Cities Near Crowley
Our trucks run daily to Crowley and the surrounding area, so if you’re in Burleson, Everman, Rendon, or Benbrook, you’re on our route. Same repair-first approach, same 90-Day Done Right Promise, same live person on the phone. If your gate is giving you trouble and you’re anywhere in the southern Tarrant corridor, call us. Our Gate Parts & Welding team handles it all on site.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Crowley
Your posts are set in the Blackland Prairie clay that runs through 76036, and that clay shrinks and swells more aggressively than the sandier soils just north of Fort Worth. A standard concrete collar doesn’t anchor deep enough, so the post rocks out of plumb within a season or two. The permanent fix is a deeper bell-bottom footing that extends below the shrink-swell zone. It costs a little more up front and it’s the difference between fixing the gate once and fixing it every year. Call (877) 610-2993 and we’ll come assess your posts.
Yes, and that’s the standard we work to. A sagging ranch gate usually means the hinge post has moved or the hinge welds have cracked, not that the panel itself is shot. We weld new hinge assemblies on site, reset or replace the post if needed, and get the gate swinging clean. Replacing the whole gate is a last resort, not the first option. Call us for a free look before you spend money on a new gate.
We do, and around Crowley’s acreage parcels we service a lot of them. The typical failure is low-voltage sag during cloudy winter stretches, or a failing battery that’s no longer holding a charge from the panel. We test the panel output, the charge controller, the battery bank, and the operator itself to find where the system is choking. Sometimes it’s a $60 battery. Sometimes the panel needs repositioning. Either way, we’ll tell you before we touch anything. Call (877) 610-2993 to schedule.
Nine times out of ten, the track rollers are worn flat or the track itself is packed with silty clay dust from the North Texas winds. The motor senses the added resistance and triggers the reversal safety. We replace the rollers, clean and lubricate the track, and check the limit switches before we call it done. A $150 roller job beats a $900 motor replacement if you catch it early. Call us the first time it happens, not after a month of fighting it.
We can, but here’s the thing: if the gate has shifted out of square, the latch is the symptom, not the problem. We’ll weld the new latch and lock, but we’ll also find out why the gate shifted. Usually it’s the post leaning in the clay again. Fix the post, square the gate, then weld the new hardware. That’s the only sequence that lasts. Call (877) 610-2993 for an exact quote. Estimates are free, and the price is locked before we start.
Get Your Crowley Gate Fixed Right, Today
If your gate is sagging, dragging, or the welds are cracking, don’t wait until it fails completely and leaves your driveway open or your animals loose. Call (877) 610-2993 and a live person will answer, any hour, any day. We’ll schedule a time for Hal or one of his crew to come out to your place in Crowley, assess the gate, and hand you a written price before any work starts. Free estimate, no trip charge inside the county, and the 90-Day Done Right Promise on every job. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Crowley since 2001.