Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Crowley
Gate motor repair in Crowley usually costs between $185 and $490 depending on what failed, and most opener issues we see in 76036 trace back to one thing: the Blackland Prairie clay under your gate posts. When a hinge post rocks out of plumb, the operator binds, the arm geometry changes, and the motor burns itself out trying to fight a post that’s already lost. We show up fast, fix the post before the motor, and stand behind it with a written 90-Day Done Right Promise. Call (877) 610-2993 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Crowley’s Preferred Gate Motor & Opener Company
Hal Gatewood has owned and run this shop since 2001. His name is on the company, his shop is published, and his license number is there for anyone to look up. When you call about a gate motor problem in Crowley, you’re talking to someone who plans to still be here next year, the year after, and the year after that. That changes how we work.
Crowley sits in a weird spot in the gate repair world. One street over you’ve got a 2021 subdivision home with an ornamental iron driveway gate that’s already leaning because the builder set the post in a shallow concrete collar on expansive clay. Two blocks the other way, there’s a 1980s ranch with an old chain-driven slide opener that’s been baking in Texas heat for thirty years. We know both problems. We fix both problems the same way: start with the post, then the operator, then the safety.
We answer the phone with a person. Not a voicemail, not an automated prompt tree that drops you into a queue. You call, Hal’s crew picks up. And if it’s after hours and your gate is stuck open with kids and dogs in the yard, you still get a person who can tell you exactly when we’ll be there.
Our Gate Motor & Opener Services in Crowley
Motor Installation
Adding a motor to a manual ornamental iron gate on a Crowley new-build is one of the most common jobs we do. Most tract builders in subdivisions off FM 1187 never ran conduit or power to the gate during construction. That means the install is more than bolting on an opener. We run the power properly, bury the conduit deep enough to survive the clay movement, and set the operator on hardware that won’t fight the post as the soil shifts. A new operator installed on a stable post in Crowley should give you ten years of quiet use. Installed on a post that’s already moving, you’ll be calling us back in eighteen months.
Motor Repair
Most motor repair calls in Crowley start with the owner describing a grinding noise, a gate that starts and stops halfway, or a keypad that lights up but doesn’t move the gate. On newer subdivision homes along Crowley Road, the cause is usually the hinge post rocking in the clay and throwing the arm geometry off. On older ranches near old town Crowley, it’s often a motor that seized from heat cycles and a post that needed sag correction years ago. We diagnose first, show you what’s actually failed, and quote the fix before any work starts. The price we quote is the price you pay. That’s not a promise we make lightly, it’s the only way Hal knows how to run a business.
Linear Motor
Linear swing motors and linear slide operators are common on Crowley’s larger acreage parcels where folks still have traditional ranch swing gates and pipe-frame agricultural gates. These systems look simple, and that’s the trap. A linear motor on a gate with a sagging post will eat its own threaded shaft inside a single season. We check the post alignment, the travel limits, and the safety edge before we ever touch the motor itself. We service Linear among the brands we carry parts for, and we stock enough locally that we’re not waiting a week for a board to ship in.
Slide Motor
Slide motors on larger Crowley lots fail for different reasons than swing openers. The rack and pinion get dirty, the chain stretches, and the gate rolls off the end stop because the concrete set on one side of the track has settled. Slide gate repair on a ranch gate or a wide driveway off a county road in 76036 usually means we’re resetting wheels, realigning the rack, and replacing a motor that’s been dragging a misaligned gate across a settling track. On-site welding matters here. We repair the gate in your driveway, not in a shop an hour away.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crowley
We’re certified to service nine major gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Crowley, we see a lot of Ghost Controls and Viking on the newer ornamental iron gates in the subdivisions, and old DoorKing slide operators on the acreage parcels. We keep common boards, remotes, and safety eyes in stock for all three, so a repair doesn’t stall out waiting on a part. If we don’t have it on the truck, we know exactly where to get it fast.
Common Gate Motor & Opener Problems We See in Crowley Homes
- Builder-grade operators dying within 2-4 years. Builders put the cheapest opener that fits on a gate post set in expansive clay. The post shifts, the operator binds, and the motor burns out trying to push a post that’s already lost. Deeper footings solve this. We recommend bell-bottom footings on every first install in 76036.
- Manual gates with no power run. Homeowners in newer subdivisions off FM 1187 buy a home with a beautiful iron gate that was never wired. Retrofit surface conduit runs along the fence, where it bakes in 100°F summers and cracks in ice storms. That is not the right way to power your gate, and it fails fast.
- Photocell misalignment from post heave. The safety eyes have to see each other in a straight line. When the clay under one post lifts it a quarter inch, the beam breaks, the gate reverses, and you’re stuck holding a remote that beeps but doesn’t move anything.
- Battery backups that die in a year. A battery backup on a builder-grade opener in Crowley’s heat often fails after a single summer because the original battery was spec’d for mild climates. We replace them with sealed deep-cycle batteries that handle the heat cycle, and we bolt them down properly.
Pricing for Gate Motor & Opener in Crowley, TX
A basic motor replacement on a standard driveway swing gate in Crowley runs $425-$780 including the operator, mounting hardware, and safety photocell realignment. Slide operator replacement on a larger lot runs $650-$1,200 depending on the gate width and track condition. Motor repair runs $185-$490 for most board swaps, limit switch replacement, arm geometry correction, or gearbox work. Battery backup replacement runs $120-$350 with the battery. Conduit and power runs for gates that were never wired during the build start around $400-$900 depending on the distance from the panel and whether we’re trenching under a driveway. Every price is quoted and agreed before any work starts. You get the number in writing, and the number doesn’t change at the door. Standing offers apply on every Crowley job: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a firm quote. Estimates are free.
Here’s what the Blackland Prairie clay does in Crowley, and it’s the reason we keep coming back to it in this page. The soil in 76036 expands when it gets wet and contracts when it dries. That cycle happens on a scale of weeks, not years, and it’s aggressive. A concrete gate post set in a standard collar footing on this soil will rock out of plumb within two to four years of new construction. We have pulled posts out of the ground on 2021 homes near Crowley Road that were leaning six degrees. A six-degree lean doesn’t look like much until you watch a gate motor eat its own arm trying to push a gate up that incline. That’s the callback cycle the national chains never mention because they’re not here long enough to see it. We are.
One job sticks with us. We pulled a LiftMaster LA400 swing gate operator off a 2021 ornamental iron driveway gate in a subdivision off FM 1187 after the hinge post rocked in the clay, threw the arm geometry off, and sent the operator into a fault loop. The homeowner had already had another company out twice, both times replacing the control board, both times the board failed again within weeks. Neither of them looked at the post. Our crew reset the post with a deeper bell-bottom footing, replaced the hinge post brackets, remounted the operator with a fresh safety photocell alignment, and walked the homeowner through a keypad entry reprogram so they weren’t locked out during the repair. The motor didn’t need replacing. It needed a post that wasn’t moving underneath it.
We Also Serve Cities Near Crowley
We work throughout the southern Tarrant County and northern Johnson County area, so if you’re down the road in Burleson, Everman, Rendon, or Benbrook, we’re already in your neighborhood most weeks. You’re looking at the same local crew, the same written promise, and the same live human on the phone. See what we do across the wider area on our Gate Motor & Opener page or the full Crowley service area.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Crowley
Your gate post is moving. In almost every case we see on newer homes near Crowley Road and FM 1187, the builder set the gate post in a standard concrete collar on Blackland Prairie clay, and that clay is now lifting the post a fraction of an inch every wet-dry cycle. The operator arm can’t hold alignment against a moving post. Fixing the operator without fixing the post means you’ll be back in the same spot next spring. We reset the post on a deeper footing, then realign the operator. Call (877) 610-2993 and we’ll come look.
Yes, and we do it often. The catch is that most of these gates were never wired during construction, so the job includes running conduit and power from the house to the gate. On a typical Crowley subdivision lot that’s a $400-$900 addition to the operator cost, depending on distance and whether we need to bore under a driveway. The operator itself, installed properly, runs $425-$780. You’ll get a written quote for the whole job before we start, and the 10% senior or veteran discount applies if that’s you.
Usually yes, and it’s a problem with a clear cause: the concrete under one side of the track has settled, the gate now rides unevenly, and the rack teeth are taking the load instead of the wheels. We inspect the track, reset the wheels and end stops, then replace the rack section and motor only if they’re actually worn. Grinding is a symptom; a warped track is the disease. Get it looked at before the motor burns itself out and turns a $300 fix into a $1,200 full replacement.
North Texas heat kills standard gate operator batteries faster than the manufacturer’s life rating suggests. A battery spec’d for 3-5 years in a mild climate can fail after a single 100°F summer, especially if it’s mounted in a metal box on the sun-facing side of the post. We replace them with sealed deep-cycle batteries that handle the temperature swings, and we mount them where they’re not baking all day. Replacement runs $120-$350 with the battery.
Yes, and sooner beats later. A leaning post means the operator arm is working against the lean every single cycle. That extra load is shortening the motor’s life, and it’s also wearing out the hinge bushings and the safety photocell alignment. Fixing the post now is a few hundred dollars. Waiting until the motor fails on top of the lean can push you over a thousand. The 90-Day Done Right Promise covers the post reset and any operator work we do with it.
Call Gatewood Fence & Gate for Gate Motor & Opener in Crowley
If your gate is grinding, stuck open, refusing to open, or just acting like it’s got a mind of its own, call us. You’ll get a live person, a straight answer, and a written quote before any work starts. Hal Gatewood has been fixing gates since 2001, and he’s not going anywhere. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Call (877) 610-2993 now for a free estimate on any gate motor or opener work in Crowley, TX.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Crowley since the early 2000s.