Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Campbell
Gate parts and welding in Campbell usually comes down to one question: can the old hardware be saved, or is it time to replace the post, the hinges, or the whole frame? Most of the time the gate itself is still good. The hinge post has rotted at the footing, or a weld has cracked, or a control board from 1994 finally gave up. That’s the work we do every week in Campbell, from the ranch homes off Winchester Boulevard to the condo complexes along Camden Avenue. If your gate won’t latch, won’t close square, or the operator just hums and does nothing, call (877) 610-2993 and talk to a person who knows Campbell gates.
We repair first. We weld on site. And we don’t haul your gate off to a shop unless there’s no honest way around it.
Why Gatewood Fence & Gate Is Campbell’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and the name on the shop is his. That means when you call about a sagging swing gate in the 95008 ZIP, you’re talking to the business owner, not a dispatcher three states away. We publish our address and license number. We answer the phone with a live person, 24 hours a day. If something we welded fails inside 90 days, the 90-Day Done Right Promise means one call brings Hal back to make it right. It’s in writing on every job.
Campbell homeowners call us because they’ve already been burned by a company that quoted one price on the phone and charged another at the door. We quote the price before any work starts, and that’s the price. No trip charge inside the county. A free second opinion on any written estimate you’ve gotten from anyone else. And a permanent 10% discount for seniors and veterans, because a lot of Campbell’s ranch-home owners are exactly who that discount was built for.
Our Gate Parts & Welding team works on gates all over Campbell, and we know the streets. The wide side-yard gates on the old orchard lots. The HOA pedestrian gates on the townhome corridors off Camden. The creek-adjacent properties where posts heave. That local knowledge is why Campbell residents keep our number in their phones.
Our Gate Parts & Welding Services in Campbell
Hinge Replacement
A gate sags in the hinge post, not in the middle. On Campbell’s 1950s-1970s ranch homes, those original strap hinges were bolted into posts that have now spent five or six decades in damp, shaded soil. By the time the latch stops lining up, the hinge hardware itself is usually worn past adjustment. We replace hinge sets with ball-bearing units sized to the gate’s actual weight, and if the post wood is soft where the lag bolts bite in, we address that in the same visit.
Post Replacement
The morning marine layer Campbell gets through summer keeps north- and west-facing post bases wet for months at a time. That’s why hinge posts on 50-year-old gates rot right at the concrete line while the rest of the post looks fine. We dig out the old footing, set a new pressure-treated post, and weld custom hinge plates to match the existing strap-hole pattern so the gate re-hangs without drilling a fresh set of holes into old wood. A typical post replacement on a 10-12 ft swing gate in Campbell runs $450-$800, including the footing and concrete work.
Rail Repair
When a gate’s top rail cracks or a weld fails on the frame rail, the whole gate racks. On Campbell’s south-facing runs without tree cover, the September-October heat spikes bake wood frames until they bow, and that bow stresses the rails and roller brackets on slide gates. We repair cracked rails with on-site welding, and for wood gates we’ll reinforce the frame so the rail carries the weight instead of the pickets. If the rail is too far gone, we’ll tell you straight, because fixing the panel without the post means you’ll fix it twice.
Custom Welding
Some gates were never built for modern operators or safety edges, and that’s where custom welding comes in. We weld mounting plates for new operators, fabricate drop-rod keepers, extend hinge straps, rebuild latch housings, and strengthen frames that are too thin for the automatic hardware Campbell homeowners want. All welding is done on site with your gate still in your driveway, unless the damage is extensive enough that a bench repair is genuinely the better job. You’ll know the difference before we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Campbell
We’re certified to service nine major gate and operator brands, and for Campbell customers that usually means the workhorses you already have on your property: Linear, DoorKing, and Viking operators are common across the 95008 ZIP, and we service them all. If your operator is dead, we diagnose the board, the limit switches, and the wiring before we recommend parts. We keep common replacement parts stocked locally so we’re not waiting on a truck from Texas while your gate sits open. When the part isn’t in our stock, we get it ordered and quoted before anything gets installed.
What we won’t do is sell you a new operator because the old one needs a $90 control board. Hal’s repair-first philosophy applies to operators as much as hinges: show us the gate closing on its own and we’ll show you where it’s failing.
Common Gate Parts & Welding Problems We See in Campbell Homes
- Rotted hinge posts on older ranch gates. Campbell’s orchard-to-subdivision conversion left thousands of homes with wide steel or redwood gates on post-and-strap hardware from the 1950s-1970s. That hardware is now past its expected life, and the post base is usually the first thing to go. The gate racks, the latch misses the keeper, and the operator pushes against a frame that’s fighting itself.
- Frozen and rusted hinges on shaded sides. North- and west-facing gate hardware takes the brunt of Campbell’s damp mornings and never fully dries for months. Pivot pins corrode, hinges seize, and the gate gets harder and harder to move until something bends. We replace those hinges with sealed ball-bearing units and treat the surrounding metal so rust doesn’t come back in a season.
- Obsolete operator boards that won’t accept new safety gear. Early LiftMaster and DoorKing swing-gate units from the 1990s are still running in a surprising number of Campbell ranch homes. The boards were never designed to accept today’s entrapment-protection photo-eyes or keypad integration, so when a homeowner tries to add safety equipment, the board refuses to cooperate. We retrofit what’s retrofittable and tell you straight when the control board has to go.
- South-facing wood gates that bow and bind slide rollers. On unshaded Campbell lots, the September-October heat spikes push wood frames past their tolerance. The frame bows, the rack-and-pinion teeth on slide gates shear or bind, and the rollers chew themselves up against the rail. We straighten and reinforce the frame, then replace the damaged rack sections so the gate rolls true again.
Pricing for Gate Parts & Welding in Campbell, CA
Here’s the honest breakdown for Campbell. Hinge replacement on a standard 10-12 ft swing gate runs $180-$320 for the hinge set, installation included. Post replacement with footing removal and new concrete runs $450-$800 depending on post size and how much of the old footing has to come out. Custom weld repairs like cracked rails, broken latch housings, or operator mounting plates run $150-$400 per weld point, depending on what we’re fabricating and how much material we’re adding. Control board replacement for a legacy operator runs $220-$550 for the board itself, plus labor, and we quote the exact board price before ordering anything.
The price we give you is the price you pay. It’s agreed before work starts, in writing. Call (877) 610-2993 for a free estimate, and take $40 off any repair over $200.
We Also Serve Cities Near Campbell
We run service calls throughout the South Bay, so if you’re just outside Campbell in San Jose, Saratoga, Santa Clara, or Cupertino, we’ll come to you. Same phone number, same live person answering at any hour, and no trip charge inside the county.
Serving Campbell, CA - Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Campbell
The answer depends on the post, not the panel. In most Campbell ranch homes where the gate has sagged that far, the hinge post has rotted at the concrete line and the lag bolts have lost their bite. The panel itself is usually fine. We’d dig out the old footing, set a new pressure-treated post, weld a custom hinge plate, and re-hang the gate with new hinges. If the post is somehow still solid, we’d just replace the sagged hinges and adjust the gate. We’ll tell you which one it is before any work starts. Call (877) 610-2993 and we’ll come look at your gate in Campbell.
Yes. The damp shade is what’s killing the hinges, so we replace them with sealed ball-bearing hinges that are designed to stay smooth even when the metal never fully dries. We also treat the surrounding metal and often relocate the hinge point slightly to get the hinges out of the worst damp zone. It’s a common Campbell problem on north- and west-facing gates, and the fix holds up. Call us for a free quote at (877) 610-2993.
Sometimes yes, sometimes no. Legacy LiftMaster boards from that era were not designed for the entrapment-protection standard that modern photo-eyes require, and if the board is dead anyway, retrofitting usually costs more than replacing the operator’s control package. That said, we’ve saved plenty of those old units with a compatible replacement board and proper wiring. We’ll diagnose it, quote both options, and you decide. Estimates are free, and seniors and veterans get 10% off the final bill.
In nearly every case, if the concrete around the post is cracking and the post is leaning, the footing has failed. The post may still be sound, but it’s being pushed over by roots or shifting soil, and that pressure will eventually split the post too. We excavate the old footing, set a new one with proper drainage, re-set the post, and re-hang the gate. On creek-adjacent Campbell lots where roots are active, we’ll often deepen the footing and weld a reinforcement collar. The cost for this in Campbell runs $500-$850 depending on footing size and access. Call (877) 610-2993 for an exact quote.
The right repair is a frame reinforcement, not another roller swap. The heat baking the south side of your gate is bowing the frame over time, and when the frame bows, the rollers bind and shear off no matter how many times you replace them. We straighten the frame, weld angle steel into the rail channels, and then replace the damaged rollers and rack teeth. That removes the bow that causes the binding, so it doesn’t return every fall. A typical reinforcement job in Campbell runs $300-$600. Call (877) 610-2993 for a free estimate.
Call Gatewood Fence & Gate for Gate Parts & Welding in Campbell
If your Campbell gate is sagging, rusted, bowing, or the operator just quit, we’ll come look at it. You’ll get a straight answer on what needs fixing, what can be saved, and what it costs before any work begins. Hal’s name is on the shop, and the 90-Day Done Right Promise is on every invoice. Call (877) 610-2993 now and talk to a live person who knows Campbell gates. Free estimates, $40 off any repair over $200, and the person who answers the phone is the person who stands behind the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Campbell since 2001.