Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Campbell
A new driveway or pedestrian gate in Campbell typically runs $1,800 to $6,500 installed, depending on width, material, and whether you’re adding an operator. Most single swing gates land between $2,200 and $3,800. We’re Gatewood Fence & Gate, and we’ve been building and repairing gates since 2001. Hal Gatewood owns the shop, answers the phone, and stands behind every job with a written 90-Day Done Right Promise.
Campbell is our kind of town. Ranch homes, wide side yards, old redwood gates that have been swinging since before the 280 was finished. We know the neighborhoods, the soil, and the way morning marine layer settles into the shaded corners of a 95008 backyard. If you need a gate built right on the first try, call us at (877) 610-2993. A real person picks up, day or night.
Why Gatewood Fence & Gate Is Campbell’s Preferred Gate Installation Company
We’re not a national chain running trucks out of a warehouse three counties away. Gatewood Fence & Gate is locally owned and owner-operated, with a published address and license number anyone can look up. Hal Gatewood’s name is on the shop and on every invoice. When you call about a sagging gate on a 1958 ranch off Winchester Boulevard, the person who answers knows exactly what that house looks like.
Our crews work in Campbell every week. They know that a 10-foot gate on a post-and-strap hinge from 1972 behaves differently than a new aluminum gate in a San Jose townhome complex. That local knowledge means we diagnose faster and quote accurately. Campbell customers regularly tell us the estimate we gave on the phone is the price on the invoice when the job’s done. That’s not a slogan. That’s how Hal has run the shop since day one.
Every job includes the 90-Day Done Right Promise, stamped in writing. If something’s not right, one call brings us back. No runaround. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
We also make it easier to say yes: free estimates, no trip charge anywhere inside Santa Clara County, $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. You’ll know the price before we start, and that price won’t change at the door.
Our Gate Installation Services in Campbell
We install every type of gate Campbell homeowners actually need. From a simple pedestrian gate on a side yard to a full automated driveway system, here’s what we handle. If you’re still deciding what type makes sense, our Gate Installation team can walk you through options over the phone or at your property.
Driveway Gate
Campbell ranch homes were built with wide driveway approaches, many 10 to 12 feet across. A single swing gate that wide is heavy, and if it’s mounted on old post-and-strap hardware, it’s working against you. We spec new posts, stainless hinges, and operators sized for the load. A typical driveway gate installation in Campbell runs $2,800 to $6,500, including the post work and operator.
Pedestrian Gate
Side-yard and rear-yard pedestrian gates are the workhorses of Campbell properties. They’re the gate you use every day, and they’re often the first to fail at the hinges. We build them from pressure-treated lumber, redwood, or steel, and we set the posts deep enough to handle Campbell’s clay-heavy soil without heaving. Most pedestrian gate installations in Campbell land between $800 and $2,200.
Sliding Gate
Sliding gates make sense on Campbell lots where the driveway slopes toward the street or where a swinging gate would block the sidewalk or a parked car. They need a level track, a solid footing, and proper drainage so the rollers don’t sit in water. We install Viking and DoorKing slide operators, and we build the gate to match. A sliding gate installation in Campbell typically runs $3,500 to $8,000 depending on length and automation.
Swing Gate
Swing gates are the classic Campbell driveway gate, especially on the wider lots along Dry Creek Road and the neighborhoods west of San Tomas Expressway. The challenge here isn’t the gate itself, it’s the hinge post. We drill, set, and brace posts so they stay plumb, and we use stainless hinges and fasteners for rust resistance. A single swing gate installation in Campbell starts around $2,200 and goes up with operator packages and custom steel work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Campbell
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Campbell customers, that means we can match a new operator to your existing gate hardware, even when the old system is proprietary. We keep common parts for Ghost Controls and Viking units on our trucks so a same-day fix is realistic. If your access control system came with the house and the original installer is out of business, we can usually untangle it without replacing the whole thing.
Common Gate Installation Problems We See in Campbell Homes
Campbell’s specific geography and housing stock create a predictable set of gate failures. Here’s what we run into most often, and what it means for a new installation.
- Rust-seized hinges on shaded north- and west-facing gates. The morning marine layer settles into these shaded corners and keeps metal hardware damp for hours after sunrise. Hinges freeze, the gate sags onto the latch post, and eventually the post itself twists. On a new installation we use stainless hinges and fasteners, and we coat the post base to keep moisture out.
- Heaved and cracked post footings near the Los Gatos Creek Trail. Sycamore and willow roots run under the soil along the trail, and they find concrete footings attractive places to grow. We see hinge posts leaned 3 to 6 inches out of plumb regularly in these neighborhoods. A new footing with a root barrier solves it. Setting a new post in the same hole without addressing the roots means you’ll be back in three years.
- Bowed and racked 10-12 ft ranch gates on south-facing runs. September and October heat spikes in Campbell can push an old wooden gate frame out of square, leaving gaps that defeat safety photocells and make the operator grind. On a new install we build the frame with steel stiffeners or choose a steel gate for full-sun runs.
- Underpowered operators on wide ranch gates. A 12-foot gate weighs more than most residential openers are rated for. If a previous owner put a light-duty operator on a heavy gate, it fails early and often. We size the operator for the actual gate weight and cycle count, not the brochure spec.
Pricing for Gate Installation in Campbell, CA
Here are honest ranges for Campbell’s market, based on jobs we’ve completed in 95008, 95009, and 95011.
- Pedestrian gate (wood or steel, single): $800 - $2,200
- Single swing driveway gate (steel or redwood, no operator): $2,200 - $3,800
- Double swing driveway gate (12 ft+ opening): $3,800 - $6,500
- Sliding driveway gate with operator: $3,500 - $8,000
- Operator installation only (existing gate): $1,200 - $3,000
- Post replacement with new footing and root barrier: $500 - $1,500 per post
What moves the price: gate width, material (redwood vs. steel vs. aluminum), post condition, operator brand, and whether we need to run power to the gate location. We quote the full price in writing before any work starts, and that price is what you pay. Call (877) 610-2993 for a free estimate. The estimate comes from a person who has actually installed gates in Campbell, not a call center.
We Also Serve Cities Near Campbell
Our crews cover Campbell and the surrounding South Bay daily. We’re often in Campbell in the morning and Saratoga or Cupertino by midday. We also handle gate installation in San Jose and Santa Clara. If you’re on the edge of Campbell or just across the border, give us a call and we’ll tell you exactly when we can be there.
Local Conditions That Make Campbell Different
Campbell has long been nicknamed the Orchard City, and you can see why when you look at the housing stock. Most of the residential core in the 95008 ZIP was built between 1950 and 1975, after the fruit orchards were subdivided into tract homes. Those ranch houses sit on wide lots with generous side yards, and many still have their original 10 to 12-foot steel or redwood swing gates on post-and-strap hardware that’s now 50 or 60 years old. That aging hardware was never designed for automation, and it’s reaching the end of its service life at the same time that many Campbell homeowners want a smart operator, keypad entry, and battery backup. A single visit to a Campbell home often involves both legacy gate repair and a new automated system on the same run.
Then there’s the Los Gatos Creek Trail. It threads through Campbell’s western neighborhoods, and properties within a mile of the creek deal with a completely different set of gate problems. Riparian moisture from the creek keeps the soil damp year-round, even in summer. Hinge posts rust at the base faster. Concrete footings crack as sycamore and willow roots work underneath them. We recently rebuilt a double swing gate in a 95008 ranch-home neighborhood off Dry Creek Road where the original post-and-strap hardware had rusted solid after decades of morning marine layer, and the hinge post had leaned 4 inches out of plumb from willow roots. Our crew cut out the old galvanized post, poured a deeper footing with root barrier, mounted new stainless hinges and a LiftMaster swing gate operator, then tuned the safety photocell and loop detector so the 12-ft gate opens smoothly onto the wide side yard. That job is what a Campbell gate installation should look like: a real fix for a real local condition, not a template response.
Campbell sits far enough inland that it avoids the heavy daily fog of the immediate coast, but it still pulls in the Bay’s marine layer through summer mornings. On shaded north- and west-facing gates, that means hinges and latches stay damp for hours every day. Chronic surface rust, frozen pivot pins, and seized hardware are the result. On the other side of the property, south-facing gate runs bake in afternoon sun. During September and October heat spikes, an old wooden gate frame can bow and rack enough that the safety photocell reads an edge gap and the operator refuses to engage. These are the two weather patterns that shape gate work in Campbell, and the repair solutions are different for each.
This page exists to tell you something you won’t find on a generic gate company’s website: which hinge-post, footing, and operator-board failures actually happen on Campbell ranch gates within a mile of the Los Gatos Creek Trail, so you don’t pay for a generic fix that lasts three years here. If your gate is near the creek, push for a root barrier. If your gate is on a shaded north or west wall, insist on stainless hardware and a post-base coating. A gate sags in the hinge post, not in the middle, and that’s where we start.
Serving Campbell, CA - Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Campbell
Root pressure and riparian moisture are the culprits. Sycamore and willow roots grow toward concrete footings, crack them, and heave the post out of alignment. The damp soil also accelerates corrosion at the post base. Gates a mile east sit in drier, more stable soil and don’t face the same root intrusion. If you’re within a mile of the trail, expect post replacement to be part of any major gate installation, and ask for a root barrier in the footing. Call (877) 610-2993 and we’ll tell you if your posts are worth saving.
Almost never. Post-and-strap hardware from the 1970s was designed for a manual gate that didn’t have to meet safety-photocell tolerances. The straps are typically rust-thinned, the pins are worn, and the post itself often has hidden rot or concrete cracks. Reusing it with an automated system leads to gate sag, sensor faults, and early operator failure. We’ll tell you plainly what can stay and what needs replacement. The price is agreed before we start.
Ask for hot-dip galvanized steel or, better for Campbell’s marine layer, painted steel with stainless hinges, stainless fasteners, and a post-base coating. Standard zinc hardware will surface-rust within two years on shaded north- and west-facing gates. Galvanized posts also outperform painted steel below grade. If you’re near the Los Gatos Creek Trail, add a root barrier and heavier post footing. We quote these upgrades as line items, not vague assurances.
It’s not the fog itself. It’s the combination of moisture and temperature cycling. Campbell’s morning marine layer leaves condensation inside operator housings, and when afternoon heat dries it, the cycle stresses the circuit board. Older operator models with poorly sealed enclosures fail fastest. A new installation should include a sealed, vented enclosure and a board rated for outdoor humidity. We replace failed boards and can upgrade the housing so it doesn’t keep happening. Call (877) 610-2993 to have us look at the unit.
It can work, but only with enough panel capacity. A 12-foot gate takes more torque to move than a standard 8-foot gate, and a small solar panel won’t keep the battery healthy. You’ll want a dual-panel setup or a panel rated well above the operator’s draw, especially on a shaded north-facing wall. We install solar gate openers in Campbell where running power is impractical, and we’ll tell you honestly if solar is a bad fit for your site. Estimates are free.
Get Your Campbell Gate Installed Right
If you’re tired of gates that sag, posts that lean, and operators that quit, call Gatewood Fence & Gate at (877) 610-2993. Hal will answer or call you back personally. We’ll come out to Campbell, look at your existing gate and posts, and give you a written price before any work starts. No trip charge inside Santa Clara County. No pressure. Just an honest assessment from someone whose name is on the shop and who has been at this since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Campbell and the South Bay since 2001.