Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Campbell
A dead gate motor in Campbell usually isn’t just a burned-out circuit board. It’s often a 50-year-old hinge post that rotted below grade, or a redwood panel that bowed in the afternoon sun and bound the operator until it tripped. Gate motor repair in Campbell typically runs $180 to $380, while a full operator replacement with labor lands between $950 and $2,400 depending on the gate’s size and condition. If your gate stopped moving this morning, call (877) 610-2993 and a live person answers, not a voicemail tree.
We’re Gatewood Fence & Gate, and we’ve been fixing gate motors in Campbell long enough to know which streets have the orchard-era hardware and which HOA gates on Winchester Boulevard still run on 1980s access control. Hal Gatewood’s name is on the shop, his address is published, and he’s been at this since 2001. That means when we tell you a motor can be repaired instead of replaced, we’re not selling you a story. We’re telling you what we’d do on our own gate.
Why Gatewood Fence & Gate Is Campbell’s Preferred Gate Motor & Opener Company
Most of our Campbell calls start the same way: the gate worked yesterday, groaned this morning, and gave up by noon. We show up, diagnose the actual failure, and fix it in the driveway instead of hauling your gate away. Hal operates this business himself, which means the person who answers your call is the same person who stands behind the work.
Every job in Campbell carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back without runaround or invoice games. We weld on site, which matters when you’ve got a 1960s redwood gate with a cracked hinge strap that no parts catalog covers. And our pricing is quoted before any work starts. The price we give you is the price you pay, period.
We also work on gates along the Los Gatos Creek Trail corridor, through the ranch-home streets of the 95008 ZIP, and in the townhome and condo complexes along Camden Avenue. Those HOA gates with proprietary intercom systems? We service those too, and we keep common boards and loop detectors on the truck so we’re not making you wait on a parts order. Calls are answered by a live person 24/7. No dispatch queue, no call center three states away. When you call (877) 610-2993, you get us.
Our Gate Motor & Opener Services in Campbell
Here’s what we actually do in Campbell, from the simple to the stubborn.
Motor Installation
A new operator on a Campbell gate starts with the post, not the motor. If the post is out of plumb by even half an inch on a 10-foot gate, the new operator burns out early and you’ll blame the brand. We check the foundation, the hinge alignment, and the gate’s swing path before we mount anything. Then we install the motor, set the limits, test the safety edges and photocells, and walk you through the controls. A typical motor installation in Campbell runs $950 to $1,800 on a single swing gate, depending on whether we’re retrofitting existing hardware or starting fresh.
Motor Repair
This is the bread and butter of every week in Campbell. Blown control boards, stripped gears, seized capacitor bearings, limit switches that lost their setting, circuit breakers that trip every time the gate cycles. In Campbell’s marine-layer mornings, condensation gets into the housing and corrosion follows. We repair what’s repairable. Motor repair in Campbell usually falls between $180 and $380, including the service call, diagnostics, and common parts like limit switches or capacitors. If we find a failed board on a 20-year-old FAAC, we’ll tell you straight whether a replacement board or a whole new operator is the smarter spend.
Linear Motor
Linear arm operators work well on Campbell’s ranch-home gates because the arm mounts directly to the gate and pushes it open with straight-line force. The catch is that a linear motor has no tolerance for a sagging panel. When a south-facing redwood gate bakes through September and October heat spikes and bows even 3/4 inch out of plane, the linear arm fights it every cycle. We correct the sag first, then service the motor so it’s not destroying itself on a rack that’s out of alignment. Linear motor repair and realignment in Campbell typically runs $220 to $450.
Slide Motor
Slide gates in Campbell are common on the wider lots where a swing gate would eat the whole driveway radius. Slide motors need a clean track, aligned wheels, and a rack that hasn’t worn its teeth into nubs. We’ve pulled everything from walnut shells to irrigation drip line out of slide tracks along the Camden Avenue corridor. Slide motor service, including track cleaning, rack adjustment, and chain or belt tensioning, runs $200 to $500 in Campbell. If the operator itself is done, a replacement slide motor runs $1,100 to $2,400 installed, and we’ll reuse your existing rack if it’s still serviceable.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Campbell
We’re certified to service nine major gate brands, and for Campbell homes we work most often on LiftMaster, FAAC, BFT, Linear, and Viking. We keep control boards, remotes, photocells, and loop detectors for these brands stocked at our Bay Area office, so a typical Campbell repair doesn’t wait on a ground shipment. If your operator is an older Linear or FAAC model that’s been discontinued, we’ll source a compatible board or tell you honestly when it’s time to retire the motor and install something built this decade. We don’t push replacement to pad the ticket. Hal fixes what other companies want to swap, and that’s not a slogan, it’s how we’ve stayed in business since 2001.
Common Gate Motor & Opener Problems We See in Campbell Homes
- Rotted or heaved hinge posts killing the motor. In Campbell’s 95008 ZIP, roughly 70% of single-family gates are 50-plus-year-old 10 to 12 foot steel or redwood swing gates on post-and-strap hardware built for orchard utility access. The motor didn’t fail on its own. It burned out fighting a post that rotted or shifted out of plumb.
- South-facing redwood gates bowing in September and October. Campbell’s inland heat spikes hit south-facing runs with unbroken afternoon sun. The redwood dries, bows, and binds against the latch post, so a linear arm or gear drive strips teeth trying to force it closed.
- Corroded hinges and seized pivot pins from morning marine layer. Campbell sits far enough inland to skip heavy daily fog, but the Bay’s moisture still creeps through summer mornings. Shaded north- and west-facing metal hinges stay chronically damp, and rust seizes the pins until the motor’s current limiter trips.
- HOA access control failures on Winchester Boulevard and Camden Avenue corridors. Those 1980s and 1990s townhome and condo gates often run proprietary loop detectors and intercom systems. Condensation shorts the loop detector, and the board gets stuck in an open or closed loop state while the motor itself is fine. We repair the control side without replacing your whole access system.
Pricing for Gate Motor & Opener in Campbell, CA
Here are real numbers for the Campbell market, quoted before work starts, never after the fact.
| Service | Typical Campbell Price Range |
|---|---|
| Motor diagnostics and service call | $95 to $145, applied toward the repair |
| Motor repair (limit switch, capacitor, gear, wiring) | $180 to $380 |
| Linear motor realignment and sag correction | $220 to $450 |
| Slide motor track, rack, and chain service | $200 to $500 |
| Single swing gate operator installation | $950 to $1,800 |
| Slide gate operator replacement | $1,100 to $2,400 |
| Battery backup installation | $350 to $650 |
What changes the price: gate length and weight, condition of the posts and hinges, whether we’re retrofitting an old operator or installing new, and whether safety edges and photocells are already in place. You get the full price before we touch a thing. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll schedule a time that works for you.
We Also Serve Cities Near Campbell
If you’re just outside Campbell, we cover San Jose, Saratoga, Santa Clara, and Cupertino as well. Dispatch and scheduling are handled from our San Francisco Bay Area office, and crews serve Campbell locally along with the surrounding South Bay communities. Same live-answer phone, same 90-Day Done Right Promise, same person who knows what an orchard-era gate post looks like.
Serving Campbell, CA - Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Campbell
Because the motor isn’t the problem. The hinge post is. A 1950s-era Campbell gate was built on post-and-strap hardware set into shallow footings. As the post rots below grade or heaves out of plumb, the gate sags and the motor has to muscle against the bind every time it cycles. That burns out even a brand-new operator in a few years. We fix the post first, then install the new motor, and it usually runs for the next decade without complaint. Call (877) 610-2993 and we’ll take a look.
Yes, in most cases the gate itself can be saved. The key is correcting the underlying condition before mounting the new operator. Gates near the Los Gatos Creek Trail pick up extra moisture from the riparian corridor, which means posts and hinges corrode faster than they do three blocks east. We cut out rotted post bottoms, pour new footings, re-hang with adjustable strap hinges, and then mount a UL 325-compliant opener with the required safety edges and photo eyes. The retrofit in Campbell typically runs $1,000 to $1,900. For a written quote, call (877) 610-2993.
Usually yes. The motor and the access control are separate systems, even when they share a cabinet. We can replace the DoorKing operator and tie it into the existing keypad, phone entry, and loop detectors. The tricky part on Winchester Boulevard’s older complexes is the proprietary 1980s and 1990s control boards, which sometimes use oddball relay logic. We trace the wiring and make the new motor talk to the old access system. If the loop detector is shorted from condensation, we replace that separately. It’s far cheaper than redoing the whole HOA entry system.
That’s the Campbell heat spike at work. South-facing redwood gates absorb direct afternoon sun during September and October, dry out, and bow. The gate binds against the latch post or rack, and the operator’s current limiter shuts it down. It’s not a motor failure. The fix is correcting the gate’s alignment, replacing or adjusting the hinges, and sometimes installing a steel stiffener across the back of the panel. Motor repair alone won’t solve it. Call (877) 610-2993 and we’ll diagnose it on the spot.
If your gate is your only vehicle access and you don’t have a pedestrian gate, yes. Campbell loses power during winter storms and occasional PG&E public-safety shutoffs. A slide gate without battery backup becomes a very heavy dead weight. A battery backup kit for a residential slide operator in Campbell runs $350 to $650 installed, and it keeps the gate cycling through short outages. It’s cheap insurance compared to being locked out of your own driveway.
If your gate motor is dead, noisy, or just not closing right in Campbell, call us at (877) 610-2993. A live person answers, we schedule a time that works, and the price is quoted and agreed before any work starts. We show up on time, in a truck with the Gatewood Fence & Gate name on the side, and we fix it right the first time. If it’s not done right, the 90-Day Done Right Promise has your back.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Campbell since 2001.