Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Memphis
Gate posts in Memphis lean because the ground under them moves. That’s the short version, and if you’ve lived here long, you already know the feeling: a swing gate that dragged fine in March suddenly binds in July, or a sliding gate that starts grinding against its track after a week of spring rain. Gate Parts & Welding work here isn’t just about replacing a hinge or laying a weld bead. It’s about knowing why the post moved in the first place, then fixing the ground problem so you’re not calling again next season. Our Gate Parts & Welding team serves homeowners across Memphis, from Midtown’s historic streets to Frayser and Whitehaven. If your gate is sagging, rusted through, or fighting its opener, call (877) 610-2993 and Hal will talk you through what’s actually wrong before anybody sets foot on your property.
Why Gatewood Fence & Gate Is Memphis’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001, and he’s been welding gates in driveways ever since. Not hauling them off to some shop across town. Not telling homeowners to replace a perfectly good gate because a hinge post moved. The name is on the shop, the address is published, and the license number is there for anyone to look up. That’s the kind of accountability that matters when you’ve already been burned by an outfit that quoted one price on the phone and charged another at the door.
Memphis homeowners call us because we answer the phone. A live person, 24 hours a day, 7 days a week. Not a voicemail tree, not a call center three states away. When you call about a gate that won’t close in Germantown or a hinge post leaning in Bartlett, you get someone who knows the soil, the housing stock, and the ice storms that have been beating on Memphis gates for decades. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print.
Our Gate Parts & Welding Services in Memphis
We handle the full range of gate repair and fabrication, but in Memphis these four services do the heavy lifting. Each one gets the same treatment: an honest look at what actually failed, a price you approve before work starts, and a repair that addresses the root cause rather than the symptom.
Hinge Replacement
Hinges on Memphis gates fail in predictable ways. The river humidity rusts exposed iron and steel, and within a decade you’re looking at hinge barrels seized solid or weld points snapping clean off. In Midtown, where ornamental wrought iron gates from the 1920s are common, we regularly see hinge pins worn to half their original diameter. We cut out the old hinges, grind the post clean, and weld on new heavy-gauge hardware rated for the gate’s full weight. Then we set the post right if it’s moved, because a new hinge on a leaning post is just a future callback.
Post Replacement
This is the Memphis special. Shelby County clay swells with spring rain and shrinks in July heat, and gate posts set in shallow footings heave and tilt year after year. Out in Frayser, our crew responded to a sagging tubular steel swing gate at a 1960s ranch where the hinge post had tilted a full 3 inches out of plumb. We reset the post in a 4-foot-deep concrete collar with rebar, welded new heavy-gauge hinges, and added a LiftMaster LA400 operator with a loop detector. The gate now clears the driveway even after a week of summer heat. That’s the standard we bring to every post replacement in Memphis: dig deep, pour a proper collar, and the post stays put.
Rail Repair
Rails rust from the inside out, especially on older gates where the original paint has worn thin. By the time you see rust bleeding through, the rail’s bottom chord may already be compromised. We grind back to clean steel, weld in replacement sections where the damage warrants it, and re-coat with a rust-inhibiting primer and finish. On long driveway gates in neighborhoods around Whitehaven and New South Memphis, the sag is often concentrated at the midpoint weld. Fix the panel without the post and you’ll fix it twice, so we check both before we ever strike an arc.
Custom Welding
Sometimes the repair isn’t a repair at all. It’s building a section, a frame, or a bracket that doesn’t exist off the shelf. Ornamental ironwork from the 1900s can’t be ordered from a catalog, and historic Midtown homes deserve gates that match the original detailing rather than whatever big-box gate panel happens to be on sale. We fabricate on site, in your driveway, so the gate never leaves your property. If you need a custom latch bracket, a reinforced bottom rail, or a wicket gate hung to match the existing ornamental line, we’ll build it and weld it and stand behind it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Memphis
We’re certified to service nine major gate brands, including Viking, Ghost Controls, and DoorKing. That matters because automatic gate openers on acres in Frayser or on long driveways in Bartlett take more abuse than suburban operators ever see. The span is wider, the gate is heavier, and the cycle count adds up. We stock common parts for these brands locally, so a limit switch or a control board doesn’t mean a week of waiting. When a Memphis gate operator fails, we diagnose the board, the motor, and the limit switches, then quote you the fix with the price locked before we turn a wrench.
Common Gate Parts & Welding Problems We See in Memphis Homes
- Hinge posts pulling out of clay soil. After spring rains saturate Shelby County clay, the ground swells and shoves posts sideways. When it dries, the post doesn’t come back all the way. Swing gates drag, bind, and throw operators out of alignment. We reset the post in a deeper concrete collar instead of shimming the hinges and pretending the ground didn’t move.
- Rusted-through hinge and rail weld points. Memphis humidity off the Mississippi River is relentless on exposed steel. Hinges snap at the base weld after a decade, and rails fail at the factory seams where water pools. We cut out the rot, weld in new steel, and coat it so it lasts another 20 years.
- Ice storm damage to operators and limit switches. Memphis sits squarely in the mid-South ice belt. Winter ice accumulates on gate operators, seizes limit switches, and repeated freeze-thaw cycles crack the concrete around post footings in older Midtown installations. A gate that works fine in November suddenly reverses for no reason in January.
- Ornamental iron fatigue on century-old gates. Midtown’s Victorian and Craftsman homes still carry original wrought iron gates from the 1900s-1930s. The pickets hold up, but the hinges, latches, and bottom rails take 80 to 100 years of weather and use. We weld stock repairs and custom replacements that match the original profiles.
Pricing for Gate Parts & Welding in Memphis, TN
A typical hinge replacement in Memphis runs $180-$340 per hinge, depending on the gate’s weight and how much grinding the old weld requires. Post replacement with a proper concrete collar and rebar runs $450-$800 per post. Rail repair where we cut out rust-damaged sections and weld in new steel runs $250-$450 per section. Custom welding work is quoted by the job, and here’s the part that matters: the price we quote is the price you pay. We walk the gate, we measure, we tell you what it costs, and you approve it before any work starts. No surcharge for something we “discovered” halfway through. Estimates are free, and there’s no trip charge inside the county. Call (877) 610-2993 and we’ll give you an honest number.
We Also Serve Cities Near Memphis
Based in Memphis, we work throughout the surrounding metro and into the neighboring counties. Our Gate Parts & Welding in Memphis coverage extends to New South Memphis, Germantown, Bartlett, and Millington. Same crew, same 90-Day Done Right Promise, and the same live person answering the phone when you call. Whether your gate is on a quarter-acre lot in Germantown or an acreage entrance outside Millington, we’ll come take a look and give you a straight answer.
Serving Memphis, TN - Our Local Coverage Area
We’re based in the Memphis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Memphis
Midtown gate posts lean because they were set in expansive clay without deep enough footings. When the clay swells with spring rain, it shoves the post sideways a fraction of an inch. When it dries in summer, the post stays put in the new position and the process repeats next year. Straightening the post without resetting it in a deeper concrete collar is a temporary fix. We dig down 3 to 4 feet, pour a collar with rebar, and the post stops moving. For an exact assessment of your Midtown gate, call (877) 610-2993 and we’ll send someone who knows the soil.
Yes. We weld mounting brackets directly to the gate frame and post, then install a solar-charged operator sized for the gate’s weight. On historic ornamental gates we take care to match the bracket placement so the opener hardware sits low and unobtrusive. Ghost Controls and Viking both make solar-capable operators we install regularly on Midtown gates where running 120-volt power to the driveway would mean trenching through brick paving or 100-year-old landscaping. Call (877) 610-2993 and we’ll come measure the gate.
Often it is. When a Frayser sliding gate grinds and jumps, the usual culprit is a bent or rusted roller bracket that was welded to the gate frame years ago. The weld itself may still hold, but the bracket has twisted, or the roller has seized. We cut out the old bracket, weld in a new one, and reset the gate on fresh rollers. If the post holding the track has shifted in the clay, we address that too. A grinding gate left alone will eventually bind hard enough to bend the opener arm. Call (877) 610-2993 and we’ll diagnose it before it gets that far.
First we cut the rusted section out entirely and assess what’s left. If the post is still structurally sound above the rot line, we weld in a new base section and plate it on all four sides for strength. If the rot has traveled, we replace the post and set it in a fresh concrete collar. Whitehaven’s 1950s-1970s ranch homes often have gate posts that were set shallow in the expanding clay, so we also check whether the post is leaning while we’re at it. The repair includes grinding, welding, and a rust-inhibiting coating. Call (877) 610-2993 for a free look at the damage.
Absolutely. When a post shifts even half an inch in Memphis clay, the gate’s travel geometry changes. The opener’s obstruction sensor reads the added resistance as something in the way, and the gate reverses. We check the safety sensors first, then measure the post plumb. If the post has moved, we reset it and re-hang the gate before touching the opener settings. If the opener itself has a bad limit switch from winter ice cycles, we replace that too. A free estimate is a phone call away at (877) 610-2993.
Call Gatewood Fence & Gate for Gate Parts & Welding in Memphis
If your gate is sagging, rusted, grinding, or refusing to close, call (877) 610-2993. A live person answers, day or night. We’ll schedule a time that works for you, show up when we say we will, and give you a written price before any work starts. Every job carries the 90-Day Done Right Promise, and Hal’s name is on every invoice. You’ll also get $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. If you’d rather look someone in the eye before you sign anything, come by the shop. The name is on the door, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Memphis since 2001.