Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Tamarac
Gate motor and opener work in Tamarac is not like gate work anywhere else in Broward County. This city was built around HOA-governed communities, which means most of the gates we work on are community entrances, not private driveways. And a lot of those operators are old. Call Gatewood Fence & Gate at (877) 610-2993 and you will get Hal or one of his crew, not a recording. We have been fixing gates since 2001, and we stock parts for the legacy hardware that still runs a surprising number of Tamarac’s 55+ communities.
Key Takeaways:
- Tamarac has one of the highest concentrations of HOA community gate entrances per square mile in Broward County.
- Many Tamarac gates still run on original or early-replacement 1980s operators; we keep legacy parts in stock.
- We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Live person answers 24/7. Free estimates. $40 off any repair over $200.
Why Gatewood Fence & Gate Is Tamarac’s Preferred Gate Motor & Opener Company
Hal Gatewood put his name on the shop in 2001 and never took it down. That alone tells you how he feels about accountability. Nobody who planned to disappear would publish an address and answer the phone with a live person at 3 a.m. But more than that, we know Tamarac’s gates specifically. Your Tamarac neighborhoods, from the communities off West McNab Road to the condominium clusters near the 33321 ZIP code, are filled with gate hardware that other companies walk away from because they cannot get parts anymore. We keep those parts on the truck.
The person who shows up at your Tamarac gate is background-checked and uniformed. The estimate is written before work starts, and it does not change at the door unless you ask for additional work. That is our promise, not a sales line. Show me a gate closing on its own and I’ll show you where it’s failing, and we start there, not with a replacement quote.
We serve Gate Motor & Opener in Tamarac with response times measured in hours, not days. South Florida humidity and storms do not wait for business hours, and neither do we. A live person answers every call, around the clock.
Our Gate Motor & Opener Services in Tamarac
Motor Installation
A new gate motor in Tamarac should be matched to the gate, not the catalog. Community entrances here are frequently swing gates that have been hanging for 30 or 40 years. That means the hinge posts, the gate mass, and the operator’s duty cycle all matter before we ever bolt on a new motor. We handle Gate Installation in Tamarac with FAAC, BFT, Linear, and Viking motors sized to the actual gate, and every installation includes a written quote before work begins. We retrofit safety photocells and edge sensors to meet current code, even on gates that predate those requirements.
Motor Repair
Most Tamarac Gate Repair jobs do not require a new motor. Control boards corrode, capacitors dry out, limit switches fail, and lightning surges take out the logic board while leaving the mechanical motor fine. We diagnose the actual fault and replace only what failed. Hal fixes the gate in your driveway rather than hauling it off or swapping parts that do not need swapping. That repair-first approach is why we can offer the 90-Day Done Right Promise in writing: if it is not done right, we make it right, one call brings us back.
Linear Motor
The Linear brand shows up constantly in Tamarac’s older communities, especially on slide gates built in the late 1980s and 1990s. Those operators are tough, but South Florida’s humidity and salt air chew through their wiring and limit switches faster than inland locations. We stock Linear replacement parts and are certified to service them. When a Linear motor in Tamarac cannot be economically repaired, we tell you that plainly and quote a replacement before any work starts.
Slide Motor
Slide gates are the predominant style at Tamarac community entrances because developers maximized roadway width for resident traffic. Those slide motors endure more than most people realize. Corroded tracks, worn rack and pinion teeth, and debris after tropical storms all strain the motor. Because we handle our Gate Parts & Welding in Tamarac, we can repair track sections in place rather than telling an HOA board to budget for a full rail replacement. Fix the panel without the post and you’ll fix it twice; we fix the whole assembly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tamarac
We are certified to service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Tamarac specifically, we keep a stock of legacy FAAC, BFT, and Linear parts on hand because so many communities still run them. When a 1980s operator finally dies, the last thing an HOA board wants to hear is that parts are on backorder for six weeks. We carry what your community needs so we can complete the repair the same week, often the same day.
Common Gate Motor & Opener Problems We See in Tamarac Homes
- 1980s-era swing gate arms with worn hinge posts. Decades of humidity cycles and daily use wear the hinge post bushings and bolts, causing the gate to sag. A gate sags in the hinge post, not in the middle, and that is where we start. We weld and rebuild posts on site.
- Corroded slide gate tracks and rack and pinion from salt air and storm surges. Tamarac’s proximity to the coast means even “inland” communities get salt-laden humidity. Tracks warp within five to seven years without maintenance, causing jerky, grinding operation.
- Obsolete telephone-entry intercom systems that no longer accept modern keypad entry. Many Tamarac communities built in the 1990s still use entry systems that are fully discontinued. We integrate modern keypads and battery backup with retrofitted motors without replacing every component.
- Post-storm power surges knocking out operator control boards. Tropical storms and hurricanes are a yearly reality here. When lightning or power surges hit a gate operator, the control board often dies while the motor survives. We see it across multiple Tamarac communities simultaneously after every storm season.
Pricing for Gate Motor & Opener in Tamarac, FL
Here is what gate motor and opener work actually costs in Tamarac. A basic motor repair on a residential or light-duty community gate, such as a limit switch or capacitor replacement, typically runs $180 to $340. Replacing a control board on a 1980s or 1990s operator falls between $450 and $900 depending on brand and availability. A full slide gate motor replacement for a community entrance in Tamarac generally runs $1,800 to $3,800, including safety photocell integration and the power run from the operator to the panel. Swing gate motor replacements run $1,400 to $3,200 depending on gate mass and hinge condition. Intercom integration with a new motor adds $350 to $900, and battery backup systems run $600 to $1,600 installed.
| Service | Tamarac Price Range |
|---|---|
| Motor repair (capacitor, limit switch, solenoid) | $180 – $340 |
| Control board replacement (legacy 1980s-1990s operator) | $450 – $900 |
| Slide gate motor replacement (community entrance) | $1,800 – $3,800 |
| Swing gate motor replacement | $1,400 – $3,200 |
| Intercom integration with new motor | $350 – $900 |
| Battery backup installation | $600 – $1,600 |
Every estimate is free. The price you see on the written estimate is the price you pay. No trip charge inside Broward County, and if you have a written estimate from another company, we will give you a free second opinion. Seniors and veterans save 10 percent on every job, permanently. Call (877) 610-2993 and ask for Hal.
What Happens When a 1980s Community Gate Operator in Tamarac Finally Dies
This is the part most gate companies will not tell you. Tamarac was deliberately planned and built between the late 1960s and the 1980s as a cluster of HOA-governed retirement communities. That planning left the city with one of the highest concentrations of community gate entrances per square mile in Broward County. Many of those gates still run on original or early-replacement 1980s-era operators and obsolete access-control intercom systems that are difficult to source parts for. In neighboring Coral Springs or Lauderhill, most of those old systems were replaced years ago. In Tamarac, they are still out there, and they fail in predictable ways.
When one of those operators dies, the honest question is not “can you fix it” but “what is actually worth salvaging.” Here is how we approach it. The control board, if it is a discontinued make, can sometimes be replaced with a retrofit board that talks to the existing motor. If the motor itself is a FAAC or BFT from the late 1980s or early 1990s and has been maintained, we can often rebuild the mechanical side: new capacitors, new limit switches, new wiring. The rack and pinion on a slide gate can be replaced in sections if the track is still sound. But if the gate itself is sagging because the hinge post is rotted or the track is warped from years of salt air, replacing the motor without fixing the structure is throwing money away. Fix the panel without the post and you’ll fix it twice. We will tell you which one you are facing before any work is quoted.
In a 55+ HOA community off West McNab Road, we recently replaced a DoorKing slide gate operator on a community entrance where the original 1988 loop detector had finally failed. Our techs pulled the obsolete control board, matched the existing rack and pinion to a new FAAC motor, and reinstalled the safety photocell, all before the board’s afternoon meeting, so residents were never locked out. That is what working in Tamarac actually looks like.
Tamarac’s Climate and Your Gate Operator
South Florida’s combination of intense UV, year-round humidity, and seasonal tropical storms degrades gate operator circuit boards, wiring insulation, and metal hardware quickly. We see swing-gate arms and slide-gate tracks in Tamarac communities show corrosion and warping within five to seven years. That is not a maintenance failure; it is the environment. What matters is how the operator is protected. A battery backup is no longer a luxury for Tamarac HOAs. When a storm knocks out power, the gate has to keep working, or residents get locked out. We strongly recommend battery backup for every community entrance we service in the 33321 ZIP code. It is not about convenience; it is about access during an emergency when the power is out and the storm has already passed.
We Also Serve Cities Near Tamarac
Our Gate Motor & Opener team works throughout northwest Broward County. If your community is in North Lauderdale, Coral Springs, Margate, or Lauderdale Lakes, we serve those neighborhoods too. The same live person answers the phone, the same written estimate applies, and the same 90-Day Done Right Promise covers the work.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Tamarac
Yes, often. We can retrofit almost any 1980s-era gate operator with modern safety photocells, edge sensors, and a current control board while keeping the existing motor if it is mechanically sound. The hinge posts and track condition matter more than the motor’s age, so we inspect those first. Call (877) 610-2993 and we will give you a straight answer about what can be salvaged.
Storm debris and salt-laden storm surges leave sand and corrosion on the track and rack and pinion, which causes exactly that jerky, grinding motion. The motor is straining against debris or a track section that has shifted. We clean, align, and weld the track on site. Jerking that goes unrepaired burns out motors fast. Call us the week after a storm; we are out across Tamarac daily during storm season.
Yes, we integrate legacy telephone-entry systems with new operators regularly. We can add modern keypad entry and battery backup without replacing the entire entry system, and we stock legacy parts for the discontinued hardware still operating in Tamarac communities. The entry system and the motor need to talk to each other correctly, and that is a wiring and control board job, not a software patch. Call us for a free estimate.
Every 12 months, and more often if the gate was installed before 1995. Tamarac’s humidity and heat cycles loosen hinge post bolts and wear bushings faster than inland Florida. A sagging gate is always a hinge post problem, never a middle-of-the-gate problem. We inspect posts during every service call, and we weld and rebuild them on site when they have started to fail.
Yes. Tamarac’s power grid is vulnerable during tropical storms, and a community gate that will not open in an emergency is a liability. Battery backup keeps the operator running when utility power fails, and we can retrofit it to almost any motor we install or repair. It is the single best investment an HOA board can make in gate reliability. Call (877) 610-2993 for exact pricing; estimates are free.
Call Gatewood Fence & Gate for Gate Motor & Opener Service in Tamarac
If your Tamarac community gate is acting up, failing, or still running on hardware from the 1980s, call us at (877) 610-2993. You will talk to a real person. We will schedule a time, show up when we say we will, and hand you a written estimate before any work starts. Hal Gatewood has been fixing gates since 2001, the name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tamarac since 2001.