Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Tamarac
Gate repair in Tamarac usually costs between $180 and $480 for common fixes like sag correction, hinge replacement, and operator board swaps, and most jobs are completed the same day we arrive. If your community gate is stuck open, stuck closed, or making a grinding sound it never made before, call (877) 610-2993 and a live person picks up, no phone tree. We work in Tamarac every week, mostly on HOA entrance gates in 33321, and we know the older equipment this city runs on better than most.
Tamarac is different from the cities around it. The streets are full of gated 55+ communities built between the late 1960s and early 1990s, and many of those entrance gates still run on operators installed when the communities were new. That changes the repair work entirely. You are not usually dealing with a single-family driveway gate here. You are dealing with a swing gate at a community entrance that two hundred cars pass through a day, pushed by an operator that has been in the Florida sun for thirty years. We show up knowing that.
Why Gatewood Fence & Gate Is Tamarac’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001, and his name is on the shop. Our Gate Repair work in Tamarac is done by people who live and work in South Florida, not by a rotating cast of subcontractors. Hal answers the phone himself half the time, and when he does not, someone who knows gates does. The person who shows up in Tamarac is background-checked, uniformed, and carrying parts for the specific brands this city’s communities actually use.
We get called to Tamarac because the HOA property manager or the board member responsible for the entrance has been burned before. A national outfit quoted one number on the phone and handed over a different invoice at the gate. Or a company replaced an entire operator when the problem was a $40 set of photocell sensors. Hal’s repair-first approach means we fix what is broken, not what is easy to upsell. And every job, whether it is a hinge weld on a swing gate in a villa community or a full operator swap on a slide gate at a condo entrance, carries the 90-Day Done Right Promise in writing.
Dispatch and scheduling are coordinated from our Miami office, but the crews serving Tamarac work locally and know the city. When a tropical storm knocks out power and three communities on the same stretch of Pine Island Road need help at once, we already have a picture of the problem before we arrive because we have seen those exact operators before.
Our Gate Repair Services in Tamarac
Electric Gate Repair
Most electric gate failures in Tamarac trace back to three things: a circuit board that fried during a storm surge, a capacitor that gave out after years of heat and humidity, or a limit switch that is so corroded it no longer tells the operator where to stop. We diagnose the board before we quote the board, and we carry legacy-compatible replacements for the older FAAC, BFT, and DoorKing units still running in Tamarac communities.
Automatic Gate Repair
An automatic gate that opens on its own, reverses halfway, or refuses to close all the way is usually fighting a sensor problem or a failing operator. In Tamarac, we see a lot of photocell misalignment after storms, because wind-driven rain pushes the housings out of position. We realign, test, and when a board or motor is truly done, we source the exact replacement rather than adapting whatever is on the truck.
Hinge & Post Repair
This is the repair we do most often in Tamarac, and the reason is the ground. South Florida soil holds water, and after heavy rain, post footings shift. A swing gate sags at the hinge post, not in the middle. If you fix the panel without fixing the post, you will fix it twice. We weld on site, set posts in proper concrete, and get the gate swinging level before we leave.
Gate Realignment
Slide gates in Tamarac run on tracks or racks that warp and corrode faster here than almost anywhere else, because the humidity never really lets up and the UV eats powder coating in five years. When a gate grinds, jumps the track, or binds halfway, we correct the rack alignment, replace worn rollers, and test the full travel. A realigned gate should move almost silently.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tamarac
We are certified to service nine gate brands, and in Tamarac that matters because the city’s older communities are heavy with FAAC, BFT, Linear, and Viking equipment. Some of those units are discontinued, and their parts are not sitting on a shelf at a supply house anymore. We keep legacy components stocked specifically for Tamarac’s aging HOA entrances, which means a 1980s FAAC swing operator does not have to become a full gate replacement just because a relay died. When we say we can fix it, we have the part or we know where to get it fast.
Common Gate Repair Problems We See in Tamarac Homes
- Post footings shifting after heavy rain. Tamarac’s sandy soil saturates quickly, and a storm can leave a hinge post leaning just enough to make a swing gate drag and bind. We re-set the post and re-hang the gate properly.
- Circuit boards dying during power surges. Tropical storms and summer lightning knock out operator boards across multiple Tamarac communities at once. We keep replacement boards for older FAAC, BFT, Linear, and Viking units on hand for exactly that reason.
- Loop detectors failing on saturated ground. Vehicle loop detectors buried in the entrance lane can start skipping or false-triggering after heavy rain changes the soil conductivity. We test the loop, adjust the sensitivity, or replace it if it is dead.
- Solid infill gates catching hurricane-force wind. Many Tamarac entrances have solid aluminum or steel infill panels rather than open pickets, and those panels act like sails. Wind load bends hinges, shears bolts, and stresses the operator. We add bracing where it was never installed and upgrade hardware where the original was undersized.
Pricing for Gate Repair in Tamarac, FL
Here are real numbers for Tamarac work, not vague ranges you cannot plan around. A basic service call inside the county runs no trip charge, and the repair itself depends on what we find. Hinge and post repair typically runs $180 to $400 depending on whether we are welding a cracked hinge, replacing a bent pin, or re-setting a post in fresh concrete. Gate realignment on a slide gate usually lands between $200 and $450, while an operator board replacement on an older FAAC or Viking unit runs $280 to $600 with the part included. A full operator swap on a community entrance gate is the big one, generally $1,200 to $2,800 installed depending on the brand and the gate weight. Every price is quoted and agreed before any work starts, in writing, and that number is the number. We also take $40 off any repair over $200, and seniors and veterans get 10% off permanently. Call (877) 610-2993 for a free exact quote.
We Also Serve Cities Near Tamarac
If you manage a property just outside Tamarac, we are already working those streets too. We handle Gate Repair in Tamarac and the surrounding area, including North Lauderdale, Coral Springs, Margate, and Lauderdale Lakes. Same repair-first approach, same live person on the phone, same 90-Day Done Right Promise.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Tamarac
Because the ground moves. Tamarac’s soil is sandy and quick-draining, which sounds good until a tropical storm drops eight inches of rain and the waterlogged soil loses its grip on concrete footings. A hinge post shifts a quarter inch, and suddenly the gate panel drags on the pavement or the latch no longer lines up. The panel itself is usually fine. We fix the post first, because fixing the panel without fixing the post means you will be calling us again in three months. Call (877) 610-2993 and we will dig in and find out what actually moved.
First, do not force the gate by hand. Most automatic gate operators have a manual release, usually a keyed disconnect or a pull chain near the motor housing. If you know where that release is and can reach it safely, open the gate fully and leave it secured in place until power returns and you can run a full test. If you do not know how to operate the release, or if the gate is sparking, smoking, or half-open in the path of traffic, call us at (877) 610-2993. We respond to Tamarac storm calls as fast as we can, and we will get the gate safely open or closed until proper repairs are done.
Yes, and we do it regularly. Many communities in Tamarac still have telephone-entry and intercom systems from the 1980s and early 1990s, and those parts are discontinued. Our techs keep a working stock of legacy components because we know Tamarac still depends on them. Before you replace the whole entry system, let us check the one you have. Often the problem is a corroded relay, a dead keypad, or a failing power supply, and those are fixable for a fraction of a new system. Call (877) 610-2993 and describe what the entry system is doing.
We start at the hinge post, not the panel. A swing gate that sags is almost always a hinge post that has shifted in saturated ground or a hinge that has worn or cracked under the constant load of a heavy gate. We re-set the post, replace or weld the hinges on site, and then re-hang the gate so it sits square and swings level. After that, we adjust the operator and safety sensors so the entire system works as one unit. That is the only way a sag repair lasts. For a quote, call (877) 610-2993.
Yes, absolutely, and not just because code requires it. Entrapment protection, which means photocells or contact edges that stop and reverse the gate if a person or vehicle is in the path, is a genuine safety issue on older gates. Many 1980s-era operators in Tamarac were installed before today’s entrapment standards existed, and some have no working safety devices at all. We will not service or repair an automatic gate without ensuring the entrapment protection is present and functional. It is a danger to residents and a liability for the HOA. If your community gate is missing this protection, call (877) 610-2993 and let us bring it up to code.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tamarac since 2001.
If your community gate in Tamarac is stuck, sagging, sparking, or just not working like it used to, call (877) 610-2993. A live person answers, the estimate is free, and the price we quote is the price you pay. Hal stands behind every job with the 90-Day Done Right Promise, and his name is on the shop. You can look it up.