Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tamarac
Gate parts and welding in Tamarac usually means one of two things: a sagging swing gate at a 55+ community entrance, or a slide gate that binds halfway open because its track has warped in the humidity. Most calls we get from Tamarac HOAs are for hinge posts rotted at the base, gate rollers chewed up by corroded track, or operators that died after a storm surge. We fix the gate where it sits. On-site welding means we don’t haul your gate to a shop across the county. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Tamarac’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. When a Tamarac property manager calls about a gate that won’t close, the person who shows up is someone who has worked on the same 1980s-era operators and telephone-entry systems that dominate this city’s communities. We’re not a franchise that rotates crew members through unfamiliar neighborhoods. We know that a swing gate off Commercial Boulevard and one off McNab Road can fail in completely different ways, even if both are 30 years old.
Tamarac’s gate infrastructure is older and more dense than almost anywhere in Broward County. HOA boards deal with multiple gates, shared entrances, and residents who expect the gate to work every single time. We built our reputation here by showing up with the right parts, doing the welding on site, and putting our 90-Day Done Right Promise in writing on every job. If it’s not right, one phone call brings Hal back. No runaround, no fine print.
Every call to Gatewood Fence & Gate is answered by a live person, 24/7. Not a voicemail, not a call center. A person. And because we’re locally owned with a published address and license number, you can look us up. Or drive to the shop and look Hal in the eye. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Tamarac
We repair rather than replace whenever the gate can be saved. That’s the whole point of what we do. Here’s what that looks like in Tamarac specifically.
Hinge Replacement
When a swing gate sags, it sags in the hinge post, not in the middle. That’s where we start. We remove the old hinge and inspect the post for rot and fatigue. In Tamarac’s older 55+ communities, hinge posts often rust through at the base from years of sprinkler overspray and standing water. We weld new hinge plates and replace the post if needed, then realign the gate so it swings true.
Post Replacement
A bent post is almost always the result of residents forcing a gate open when an operator failed. We see this pattern across Tamarac HOA communities in 33321. We remove the damaged post, set a new one in concrete, and weld the hinge or latch hardware back in place. The gate gets squared to the post, not the other way around. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Slide gates run on rails that warp and corrode fast in South Florida’s humidity. In Tamarac’s garden-apartment communities, we routinely see rail sections that have buckled from heat expansion or rusted through near the drainage cutouts. We cut out the bad section, weld in a new run, and true the rail so the gate rollers don’t bind. Shimming is a patch. Welding is the repair.
Custom Welding
Some repairs don’t fit a catalog part. A cracked gate frame, a bent bracket, a broken latch catch – these are welding jobs. We do it on site, in the driveway or at the community entrance, with the gate still in its track. Tamarac HOAs call us for broken picket welds, fabricated hinge reinforcement, and custom brackets for retrofitting newer safety sensors onto older operators.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tamarac
We service and stock parts for Viking, Ghost Controls, DoorKing, and Elite, among the brands that show up most often at Tamarac community entrances. If your community runs a DoorKing slide operator from the 1990s, we likely have the relay board or limit switch on the truck. If it’s a Viking swing arm, we can typically source or fabricate what’s needed without sending the gate to a shop. That matters when your only vehicle entrance is down and residents are backed up onto Pine Island Road.
Common Gate Parts & Welding Problems We See in Tamarac Homes
- Original 1980s swing-gate operators with obsolete loop detector boards. Power surges during tropical storm season burn out the boards, leaving the gate stuck open or closed. The replacement parts were discontinued years ago, but we keep legacy stock specifically for Tamarac’s older communities.
- Slide-gate tracks that warp and corrode within 5-7 years. Salt air and humidity eat at the galvanizing. The track binds the rack-and-pinion, and the rollers wear flat on one side. We weld in new rail sections and replace the rollers before the gate seizes.
- Hinge posts rotting at the base in older 55+ communities. Sprinkler overspray plus constant gate movement and South Florida heat leaves a hinge post soft and leaning. Residents force the gate, which bends the post further and rips out the latch hardware.
- Telephone-entry systems and loop detectors from the 1980s-90s that no one makes parts for. Tamarac has an unusual concentration of these systems. Our Gate Parts & Welding team keeps used and rebuilt components in stock because replacing the whole access system is a five-figure HOA decision nobody wants to make twice.
Pricing for Gate Parts & Welding in Tamarac, FL
Here are straight numbers for Tamarac’s market. Hinge replacement on a swing gate typically runs $280-$520 per hinge, including on-site welding and realignment. A full post replacement runs $450-$950 depending on the post size and whether we’re working around conduit or existing hinge hardware. Rail repair on a slide gate runs $400-$850 per section, and custom welding jobs start around $200 and go up based on materials and complexity. We quote the full job price before any work starts. The number you hear on the phone is the number you pay. We also take $40 off any repair over $200, we don’t charge a trip fee inside the county, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote on your Tamarac gate. Estimates are free.
We Also Serve Cities Near Tamarac
We work throughout Tamarac and the surrounding Broward County communities, including Tamarac, North Lauderdale, Coral Springs, Margate, and Lauderdale Lakes. If you’re a property manager with multiple communities or a homeowner near the 33321 line, call us and we’ll tell you if we can be there today.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tamarac
Yes, in nearly every Tamarac community, HOA architectural approval is required before visible changes like replacing a gate post, changing a gate’s height or finish, or altering the entrance structure. We coordinate with your board or property manager, provide the drawings and specs they need for the ARC request, and make sure the work matches the approval before we cut or weld anything. Call (877) 610-2993 and we’ll walk you through what your specific HOA requires.
Yes. We keep stock of legacy parts that most companies stopped carrying a decade ago. Many of Tamarac’s older HOA communities still run telephone-entry systems and loop detectors from the 1980s and 1990s that are fully discontinued. We source, rebuild, or retrofit compatible components, and when a direct replacement isn’t available, we can often integrate a modern keypad or phone-entry module with your existing operator so part of the system remains untouched. Call (877) 610-2993 for a free assessment.
The gate starts to sag and bind against the latch plate, and residents begin forcing it, which bends the post further and tears out the hardware. If we catch it before the post bends, we can often weld new hinge plates and brace the post in place. If the post is rotted or bent, we replace it, set new footings, and weld the hardware back to square. At a 55+ condo community off Pine Island Road in Tamarac, our crew replaced a corroded hinge post on a swing gate after the board noticed sagging and binding. We welded new post footings and retrofit a DoorKing operator with a modern safety photocell, then coordinated with the property manager to keep resident keypad entry live during the repair. The gate now closes square and passed UL 325 entrapment checks. Call (877) 610-2993 before it gets worse.
For single-entrance communities, we schedule the welding so the gate is down only during the lowest-traffic window, and we line up temporary access controls before we start. For communities with two entrances, we work one gate at a time so residents always have an open route. We coordinate with your property manager and the board so everyone knows the plan. The goal is simple: repairs are staged, resident access is continuous, and the gate is never left stuck open overnight. Call (877) 610-2993 to schedule around your community’s traffic pattern.
It’s usually a parts issue, specifically a control board or loop detector that took a power surge. South Florida thunderstorms are hard on old gate operators, and Tamarac’s 1980s-era systems are especially vulnerable. We trace the fault, replace the damaged board or detector, and add surge protection if the enclosure allows. If the surge also burned out a limit switch or welded a relay, we handle that too. Call (877) 610-2993 and we’ll diagnose it on site.
Get Your Tamarac Gate Fixed Right, Today
If your Tamarac community’s gate is sagging, binding, stuck open, or down after a storm, call (877) 610-2993. Hal Gatewood will answer, or someone on his crew will. We’ll give you an honest price over the phone, set a time, and show up. No voicemail, no dispatch queue, no call center. The name is on the shop. The work is done in your driveway. And the 90-Day Done Right Promise is in writing on every invoice we hand you.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tamarac since 2001.