Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tamarac
Gate installation in Tamarac runs a little different than most Florida cities. The bulk of the work here is not single-family driveway gates. It’s HOA community entrances, the double swing and sliding gates guarding 55+ neighborhoods that were built out between the late 1960s and early 1990s. If your Tamarac community gate is down, or the board has finally agreed it’s time to stop patching a 1980s operator, call (877) 610-2993. Hal Gatewood has been at this since 2001, and the person who answers the phone is a live human, any hour, no voicemail tree.
Why Gatewood Fence & Gate Is Tamarac’s Preferred Gate Installation Company
Most gate companies in Broward County would rather sell you a new everything. We would rather ask what actually failed. That is not a slogan. Hal Gatewood owns the company, answers for the work, and has a published address and license number anyone can look up. The 90-Day Done Right Promise is stamped in writing on every job, not buried in fine print. If it’s not done right, one call brings him back, no runaround.
Tamarac specifically keeps us busy because so many of its communities run the same aging hardware: original 1980s-era operators, discontinued telephone-entry systems, loop detectors nobody manufactures anymore. We stock legacy parts for exactly this reason. A technician who only knows new installs will tell your HOA board to replace everything. We will tell you what can be retrofitted and what is actually cheaper to replace. That honesty is why boards and property managers in Tamarac keep our number.
Every call is answered by a live person, 24/7. Not a call center, not a chatbot. You will talk to someone who knows gates or can get Hal on the line. And the person who shows up to your Tamarac community is background-checked and uniformed, not a subcontractor wearing someone else’s shirt.
Our Gate Installation Services in Tamarac
We install and service every type of gate found in Tamarac’s HOA communities, from the main vehicular entrance to the pedestrian gate by the pool. Here is what that covers, and what it usually looks like here.
Swing Gate Installation
Swing gates are the most common entrance style across Tamarac’s low-rise condo and villa communities. Most were installed decades ago and have outlived their post footings. In Tamarac’s sandy, low-lying soil, a hinge post will rot or shift, the gate sags, and the operator burns itself out trying to move a gate that no longer hangs true. We set new footings with galvanized steel, re-hang the gate, and install the operator only after the gate swings freely by hand. Fix the post first or you will fix it twice.
Sliding Gate Installation
Sliding gates are popular where Tamarac communities have limited setback from the road or a driveway that slopes. The track and rollers take the abuse from South Florida humidity and storm debris. We see slide gates in Tamarac with tracks warped from heat and rollers seized by rust within five to seven years. A new slide gate installation here means addressing the track bed, the post, and the operator together, not just bolting a new panel onto a failing foundation.
Security Gate Installation
For Tamarac HOAs, a security gate is the first physical layer of access control. That means the gate, the operator, the safety photocells, and the entry system all need to work as one unit. We install full security gate packages for communities across 33321, coordinating with property managers so the entrance stays functional during the swap. When we replace a security gate in Tamarac, we also check that the old safety edges and photocells meet current UL 325 entrapment protection. Many original installations do not, and that is a liability the HOA does not want to carry.
Pedestrian Gate Installation
Pedestrian gates in Tamarac’s garden-apartment and condo communities lead to pools, clubhouses, and walkways. They get less attention than the big vehicular gates but fail just as often, usually at the latch or the closer. We install and repair pedestrian gates with the same care as a double swing, including keypad or card access where the HOA wants controlled entry. A pedestrian gate that does not close and latch is a security hole, plain and simple.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tamarac
We are certified to work on nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Tamarac specifically, we keep a stock of DoorKing, Viking, and Elite parts because those are the names we see most on the community entrances built between 1968 and 1990. If your operator is one of those and the board wants to keep it running, parts are usually in our truck, not on backorder. If the board is ready for something newer, we will install a Gate Installation package that fits the existing gate footprint where possible. That saves the community money on concrete work and keeps the entrance looking like it belongs.
Common Gate Installation Problems We See in Tamarac Homes
- Obsolete control boards on 1980s-era operators. These fail without warning, and replacement boards are often discontinued. At that point, the HOA is usually better served by a full operator replacement than a salvage part. We will show you the numbers and let the board decide.
- Rotted or shifting hinge posts. The gate sags, drags on the pavement, and overloads the motor. We see this constantly in Tamarac’s older communities. Setting a new post footing with galvanized steel is the only real fix.
- Missing or non-functional safety photocells and edge sensors. Original installations predate modern entrapment protection. A gate without working safety devices is a serious injury risk and a liability for the association. This is not a corner to cut.
- Storm surge and power damage. After a tropical storm or hurricane, operators across multiple Tamarac communities go down at once from power surges and debris strikes. Post-storm is our busiest gate installation season, and we prioritize existing customers.
Pricing for Gate Installation in Tamarac, FL
A straightforward pedestrian gate install in Tamarac typically runs $800 to $1,800. A single swing gate with a new operator and post footing lands between $3,500 and $6,500. Double swing gates are the most common here, and a full replacement with new operators, safety devices, and access control runs $7,000 to $14,000 depending on gate size and whether the existing posts can be saved. Sliding gate installations in Tamarac range from $6,000 to $12,000, with track replacement adding to the lower end of that range. The price you are quoted is the price you pay. We quote it, you approve it, we do the work. Nobody shows up with a change order at the door. Call (877) 610-2993 for a free estimate, and ask about the $40 off any repair over $200 and the permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Tamarac
Our Tamarac service area extends into the surrounding Broward communities most of our customers live in. We regularly install gates in North Lauderdale, Coral Springs, Margate, and Lauderdale Lakes. If your community sits right on the line between any of these cities and Tamarac, call us. The trip charge inside the county is zero, and the same 90-Day Done Right Promise applies everywhere we work.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tamarac
Yes, if it still works, it can stay, but you should have a plan for when it fails. Parts for 1980s-era operators are mostly discontinued. A control board will die without warning, and then you are down for days or weeks waiting on a salvage part, if one exists at all. Many Tamarac boards choose to retrofit the access control and keep the old gate, then budget for operator replacement on a schedule instead of an emergency. We can tell you honestly which of your components are worth keeping and which are a liability waiting to happen. Call (877) 610-2993 and we will walk the site with you.
Tamarac’s soil is sandy and sits low, and many communities were built over what used to be marshland. A post set too shallow or with undersized concrete will lean within a few years from the gate’s own weight and South Florida’s wet-dry cycle. We pour deeper footings with galvanized steel reinforcement, which is more than a typical residential gate in drier parts of the state would need. This is not an upsell. It is the reason we do not get called back for the same post twice.
Power surges and debris strikes. Lightning and grid surges knock out operator control boards, and wind-driven debris bends gate panels or jams the track. After a storm, multiple communities in Tamarac go down at the same time, which is why we keep extra parts and operators on hand during hurricane season. If your gate is still working after a storm, have someone look it over anyway. A weakened post or a compromised safety sensor will fail soon after.
In most cases, yes. Many Tamarac communities run old telephone-entry systems that are fully discontinued, but the gate and operator still have life left. We regularly install new keypad, card, and intercom systems that work with existing operators from Viking, DoorKing, and Elite. The one thing we will not do is leave the old operator without proper safety devices. Upgrading access control is a good time to bring the whole entrance up to current safety code. Call (877) 610-2993 for a free site visit and an honest recommendation.
Look at the gate from the side. If it sags toward the latch post, if the gap at the hinge is wider at the top than the bottom, or if the gate drags on the pavement, the post is the problem. A sagging gate overloads the operator and burns out the motor. Replacing the panel without fixing the post is throwing money away. We recently replaced a double swing gate at a 55+ community in Tamarac’s 33321 zip code. The Viking operator had failed, and the hinge post had rotted at the base. We set a new post footing with galvanized steel, installed a LiftMaster swing gate operator with a safety photocell, and retrofitted the existing loop detector to work with the new keypad entry system, all while coordinating with the HOA board to minimize downtime. That job cost less than the previous contractor’s quote for a new everything, because we only replaced what had actually failed.
Key Takeaways
- Tamarac has one of the highest concentrations of HOA community gate entrances per square mile in Broward County.
- Most gate installation work here is retrofitting or replacing 1980s-era operators and discontinued telephone-entry systems, not starting from scratch.
- We stock legacy parts for Viking, DoorKing, and Elite specifically because Tamarac’s community gate stock is older than neighboring cities.
- Every job carries the 90-Day Done Right Promise in writing, and a live person answers the phone 24/7.
- Pricing is quoted and agreed before work starts. No surprises at the door.
If your Tamarac community gate needs a new install, a retrofit, or just an honest answer about whether to repair or replace, call Hal Gatewood at (877) 610-2993. He will come out, look at the gate in person, and tell you what he would do if it were his own community. That is the whole pitch. No pressure, no sales script, just a guy who has been fixing and installing gates since 2001 and will hand you his cell number and mean it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tamarac and surrounding Broward County communities.