Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Round Rock
If your automatic gate has stopped responding in Round Rock, the fix usually comes down to one of two things: a motor that’s finally given out, or a post the Blackland Prairie clay has slowly pushed out of plumb. We handle both. Gatewood Fence & Gate has been owner-operated since 2001, and our Gate Motor & Opener work across Round Rock means driving to Teravista, Paloma Lake, Stone Canyon, and every HOA subdivision in between. Call (877) 610-2993 and a live person answers, any hour. That’s Hal’s rule, not a call-center script.
What we see in Round Rock more than almost anywhere else is a gate motor condemned as dead when the real culprit is the clay under the post. We’ll get to that. First, know this: if your operator failed, we can usually have it diagnosed and repaired in one visit, with the parts on the truck. If the post has moved, we weld and reset on site. The gate stays in your driveway. The name on the invoice is the same name on the shop.
Why Gatewood Fence & Gate Is Round Rock’s Preferred Gate Motor & Opener Company
Round Rock homeowners tend to ask the same question before they hire anyone: “Are you local, and will I see the same person twice?” Yes to both. Hal Gatewood has been fixing gates since 2001, long enough that he’s repaired openers on gates he originally installed when Paloma Lake was still new construction. We’re not a franchise with rotating crews. The person who answers your call is the person who shows up, and that person knows the difference between an FAAC hydraulic operator and a Linear arm opener without looking at the manual.
We serve all of Round Rock including 78664, 78665, 78681, 78682, and 78683. Homeowners in Brushy Creek and Cat Hollow call us for the same reason people in Teravista do: the gate gets fixed right the first time, and if it’s not, the 90-Day Done Right Promise means one call brings us back. No runaround. We also keep a permanent 10% discount for seniors and veterans, and $40 off any repair over $200. No trip charge inside Williamson County.
Every job gets upfront pricing agreed before we start. Not an estimate that “might change at the door.” The number we quote is the number on your invoice.
Our Gate Motor & Opener Services in Round Rock
Motor Installation
Installing a new operator on a Round Rock driveway gate isn’t a one-size-fits-all job. A wrought-iron swing gate in Teravista needs a different setup than a long steel slide gate on a Paloma Lake acreage lot. We measure the gate weight, leaf length, post condition, and power availability before recommending anything. We install operators from BFT, FAAC, Linear, Viking, LiftMaster, and the other brands we’re certified on. The job includes the operator, wiring or solar setup, safety edges or photocells per code, and a full test cycle. Free measure and written price, so you know the cost before you commit a dollar.
Motor Repair
Most motor repairs in Round Rock start with a symptom: the gate hums but doesn’t move, it reverses halfway, it trips the breaker, or it opens fine in the morning and binds by afternoon when the steel’s had hours of 100°F sun. We diagnose on site with the cover off and the gear train visible. Often the fix is a stripped rack and pinion drive, a cooked capacitor, or a limit switch that’s drifted. We stock common repair parts on the truck, so we’re not ordering and returning next week. The price is quoted before we turn a wrench.
Linear Motor
Linear arm operators are everywhere in Round Rock’s 1990s and 2000s HOA communities because they’re reliable workhorses for single-swing ornamental gates. The weak point we consistently see is the arm’s internal gear set, which strips when a post has leaned enough to add drag to every cycle. Before replacing a Linear motor, we check the gate leaf’s swing with the operator disconnected. If the gate doesn’t glide freely by hand, a new motor will burn out the same way the old one did. That’s the difference between a part swap and a repair that lasts.
Slide Motor
Long, heavy slide gates like the ones on larger Paloma Lake and Stone Canyon lots need serious torque. We install and repair slide operators rated for the actual gate weight, not the optimistic number on the original builder spec. Round Rock’s clay soil also shifts the track and guides over time, which can bind a slide gate and overload the motor. We check the track alignment, roller condition, and post anchoring as part of every slide motor diagnosis. No point bolting a new motor onto a gate that can’t roll freely.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Round Rock
We’re certified to service and install nine major gate operator brands, and in Round Rock we work on plenty of FAAC hydraulic swing operators, BFT slide motors, Linear arms, and Viking units. Why does that matter to you? Because when your Teravista gate calls for a specific control board or limit switch, we usually have it on the truck or at the shop that same morning. We don’t tell you to wait a week for a part to ship from a warehouse three states away. We fix it now, and we stand behind the fix for 90 days in writing.
Common Gate Motor & Opener Problems We See in Round Rock Homes
- Post movement from Blackland Prairie clay. The soil under Round Rock swells when wet and shrinks hard in drought. Over two decades, that torques gate posts out of plumb, particularly in Paloma Lake and Stone Canyon where posts were poured in the early 2000s. The gate leaf binds, and the motor grinds itself to death trying to push through the resistance.
- Heat-stressed welds on ornamental gates. Round Rock summers regularly pass 100°F, and steel expands. That expansion and contraction works on every weld, especially at hinge points on custom iron gates. We fix sag at the hinge post, not the middle of the gate. Fix the panel without the post and you’ll fix it twice.
- Stripped rack and pinion drives from binding gates. When a post leans and a gate starts dragging, the first thing to fail is often the rack and pinion drive inside the operator. We see this constantly behind a “gate motor replacement” call. The smarter fix is resetting the post and replacing only the stripped drive.
- Winter ice damage to exposed operators. Central Texas ice events hit hard and fast. An unsheltered gate operator on a driveway with no canopy can seize up, crack plastic gears, or trip safety photocells for days afterward. We recommend weather shielding and battery backup for any Round Rock gate that faces north or has no cover.
Pricing for Gate Motor & Opener in Round Rock, TX
Here’s what Round Rock homeowners can expect to pay, based on the work we’ve done across 78664, 78665, 78681, and 78682 in the last two years:
| Service | Typical Round Rock Price Range |
|---|---|
| Motor diagnosis and minor repair (capacitor, limit switch, photocell) | $180 - $340 |
| Motor replacement with standard swing arm operator | $750 - $1,450 |
| Slide motor replacement (heavy-duty, long gate) | $1,200 - $2,800 |
| Post reset, new footings below active soil zone, re-hang gate | $650 - $1,900 |
| Full operator install with battery backup and safety edges | $1,400 - $3,200 |
Those ranges reflect what we actually write on Round Rock invoices. Gate weight, post condition, power access, and whether the post footings need to be re-poured all move the number. What doesn’t move is the price after we quote it. Every quote is free, and we put it in writing before any work starts. Call (877) 610-2993 and we’ll give you a real number, not a ballpark.
We Also Serve Cities Near Round Rock
Our crews cover Round Rock and the surrounding communities of Hutto, Georgetown, Brushy Creek, and Pflugerville. If your gate is a few miles outside the Round Rock city limits, we’re already nearby. We also work across every HOA subdivision inside Round Rock proper. Gate Motor & Opener in Round Rock is our home turf, and we know these gates as well as any company in Williamson County.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Round Rock
The Blackland Prairie clay under Round Rock heaves when it absorbs heavy rain, and that’s what’s killing the motor. The post footings shift, the gate leaf starts binding, and the motor draws more amps on every single cycle until it burns out. The fix is not another new motor. It’s resetting the post on footings poured below the active soil zone. Call (877) 610-2993 and we’ll tell you whether you have a motor problem or a post problem. The diagnosis is free.
Yes. We integrate intercom and keypad entry systems with existing ornamental gates across Teravista, Paloma Lake, and the rest of Round Rock. We handle the wiring run, the mounting on your existing gate post or column, and the programming so the system opens the gate from inside the house and from a visitor’s phone. We quote the full job before starting, and it carries the same 90-Day Done Right Promise as everything else we do.
A heavy-duty slide operator rated for at least double the gate’s actual weight is what those long Paloma Lake driveways need, and we specify Viking, BFT, or FAAC slide motors for most of them. The real risk on a heavy slide gate is underpowering it, which burns out the motor and strips the drive in two or three years. We measure the gate, check the track and rollers, and spec the operator the same day. Free measure, written quote.
In Round Rock, yes, it’s genuinely worth it. Winter ice events knock out power to whole neighborhoods while the gate is frozen in place, and without battery backup the gate won’t open without manual release. That’s a bad situation when you need to get to work or get a car out in a hurry. We install battery backup on most operators we replace in Round Rock, and it adds roughly $300 to $500 depending on the system. Call (877) 610-2993 for an exact quote for your gate.
The simplest test: disconnect the operator and try to swing or slide the gate by hand. If it moves easily, the motor is the problem. If it binds, drags, or won’t sit level, the post has moved. In Stone Canyon and the rest of Round Rock, we’ve seen post footings poured in the early 2000s shift visibly after two decades of clay heaving. We reset them on site, weld as needed, and re-hang the gate so a new motor has a clean, free-moving leaf to work with. One visit, one diagnosis, one price.
Get Your Round Rock Gate Fixed Right
If you’re in Round Rock and your gate won’t open, or it’s grinding, or it trips the photocell every time the sun gets hot, call (877) 610-2993. A live person answers. We’ll schedule a time that actually works, show up when we said we would, and hand you a written quote before we touch a tool. The 90-Day Done Right Promise is in writing on every job. $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Hal’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Round Rock since 2001.