Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Round Rock
Gate parts and welding in Round Rock usually costs between $180 and $640, depending on whether we’re re-setting a post, rebuilding a hinge, or fabricating a bracket on site. Most repairs are done in a single visit, and we carry the common hardware for Linear, Viking, Ghost Controls, and DoorKing operators on the truck. If your gate sags, binds, or won’t close, call (877) 610-2993 and you’ll get a live person who can tell you what it’ll take.
We work in Round Rock constantly, from Paloma Lake to Teravista to the older subdivisions off Bowman Road where the clay has been shifting since before the first McMansion went up. The soil here is the real boss. It heaves when it rains and cracks when it doesn’t, and eventually every gate post in Williamson County has to answer to it. We know that before we ever put a wrench on a hinge, because we’ve been correcting what Round Rock clay does to steel since Hal Gatewood started this company.
Why Gatewood Fence & Gate Is Round Rock’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and on every invoice we hand a Round Rock homeowner. That matters in a town where a lot of folks have been burned by a nameless crew that quoted one number over the phone and wrote a different one on the work order. Hal’s repair-first approach means we don’t swap parts that don’t need swapping. We weld on site, in your driveway, where you can watch. If the name is on the shop and the shop is down the road, that’s the oldest accountability there is.
Every job carries the 90-Day Done Right Promise in writing. Not “up to” 90 days. Not “in most cases.” Ninety days, and if it isn’t right, one call brings Hal back. We answer the phone 24/7 with a live person, not a voicemail and not a queue. For Round Rock residents, that means when a winter ice storm seizes your gate hinge at 6 a.m., you can reach someone who knows what Teravista driveways look like frozen over.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Our technicians are background-checked and uniformed. We’re certified on nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing. Round Rock is part of the county we work in every day, so there’s no trip charge inside the county line, and seniors and veterans get a permanent 10% discount on everything we do.
Our Gate Parts & Welding Services in Round Rock
Hinge Replacement
Round Rock’s summer heat expands steel gate frames and stresses hinge welds until hairline cracks turn into visible lean. We replace barrel hinges, weld-on hinges, and heavy ornamental strap hinges with the gate still in place. A new hinge on a gate in Paloma Lake or Stone Canyon has to be welded square to a post that’s actually plumb, otherwise you’ll be back here in eighteen months.
Post Replacement
This is the big one in Round Rock. Blackland Prairie clay heaves in wet seasons and contracts during drought, pushing hinge posts out of plumb and binding gates so that what feels like a dead opener is actually a leaning post. We pull the old post, dig a deeper footing, pour it square, and re-set the gate so it swings true. In HOA-governed communities, we match the existing post diameter and finish so the architectural committee never has a reason to send a letter.
Rail Repair
Rails on ornamental iron driveway gates crack at the weld points, especially at the mid-rail where the pickets connect. We cut out the fatigued steel, weld in new material, and grind it smooth before prime and paint. A gate in a Teravista driveway that’s been baking in 100-degree summers for fifteen years has usually got at least one rail that’s ready to let go.
Custom Welding
Not every gate problem has a part number. We fabricate brackets, extend gate leaves, reinforce hinge points, and build custom picket replacements on site. If a previous contractor left a sloppy weld, we’ll grind it out and do it right. Gatewood Fence & Gate is built on the idea that Gate Parts & Welding means fixing what’s there, not hauling it off and selling you a new gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Round Rock
We stock parts and service Linear, Viking, Ghost Controls, and DoorKing gate operators throughout Round Rock. These are the brands you’ll find on most 2000s-era HOA entry systems and residential driveway gates in the area. Because we carry the common boards, limit switches, and capacitors for these brands on the truck, we can often diagnose and repair the same day rather than ordering a part and coming back. When a DoorKing board fails on the Teravista entrance gate, the HOA manager wants it working today, not next week.
Common Gate Parts & Welding Problems We See in Round Rock Homes
- Leaning hinge posts from clay-soil movement: Round Rock’s Blackland Prairie clay swells when it rains and shrinks when it doesn’t, and after fifteen or twenty years a post that was poured square is now visibly out of plumb. The gate binds, the opener strains, and the homeowner thinks the motor is bad when the real problem is concrete work.
- Heat-stressed welds and cracked rails: Central Texas summers regularly top 100°F, and steel expands. Hairline cracks at hinge and latch points turn into full breaks, especially on dark-painted ornamental gates that sit in full afternoon sun.
- Worn slide gate rollers and rack drives on HOA entry systems: Shared community gates in Round Rock cycle hundreds of times a day. When the rollers wear and nobody catches it, the rack-and-pinion drive takes the load and fails early.
- Seized hinges after winter ice events: Central Texas doesn’t get much ice, but when it hits, it hits hard. Exposed hinges on driveway gates freeze, and the next morning the opener burns itself out trying to force a gate that won’t move.
Pricing for Gate Parts & Welding in Round Rock, TX
Here’s what gate parts and welding typically run in the Round Rock market:
- Hinge replacement: $180-$340 per hinge, including welding and reinforcement
- Post replacement (single hinge post): $400-$780, including concrete removal, new deeper footing, and gate re-set
- Rail repair: $160-$320 per rail, depending on length and weld length
- Custom welding (brackets, pickets, gate leaf extension): $150-$500 per project
- Gate roller replacement (slide gates): $120-$260 per pair
These are honest ranges for Round Rock’s housing stock, where most ornamental iron gates are 15 to 25 years old and built on clay. The price you’re quoted is the price you pay, and it’s agreed before any work starts. We don’t show up with a different number at the door. We also take $40 off any repair over $200, and we’ll give you a free second opinion on any written estimate you’ve received from another company. Call (877) 610-2993 and we’ll give you a real number over the phone.
We Also Serve Cities Near Round Rock
Beyond Round Rock, we regularly take calls from Hutto, Georgetown, Brushy Creek, and Pflugerville. A lot of our customers live in one town and manage a property in another, and our crews cover the whole corridor. If you’re looking for Gate Parts & Welding in Round Rock or a neighboring community, the same 90-Day Done Right Promise applies, and the same live person answers the phone.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Round Rock
No, not if the post itself has moved. In Round Rock, a sagging gate usually means the hinge post has been pushed out of plumb by the Blackland Prairie clay heaving and contracting over the years. New hinges welded onto a leaning post will just bind again in a year or two. Fix the post without the hinge and you’ll fix it once; fix the hinge without the post and you’ll fix it twice. Call (877) 610-2993 and we’ll tell you which one you’re dealing with.
In most Round Rock master-planned communities, yes, especially if the gate is visible from the street or part of a shared entry system. Paloma Lake, Stone Canyon, Teravista, and similar HOA-governed neighborhoods have architectural guidelines that cover gate style, height, finish, and even the type of hinges. We can help you understand what your management company requires before we weld anything, and we’ll match the existing materials so the approval goes through without a fight.
Because the gate itself is binding, and the opener is working against the bind. Round Rock’s heat expands steel frames, and if the post has leaned even a few degrees, the gate leaf drags and the motor runs hot. A new opener on a gate that doesn’t swing freely will overheat and fail just like the old one did. Show me the gate closing on its own and I’ll show you where it’s failing. Call (877) 610-2993 for a free estimate.
Yes, most of the time we can keep one lane open or schedule the work during low-traffic hours. Shared entry systems in Round Rock HOA communities see heavy cycling, so worn slide gate rollers and rack drives need attention quickly. We coordinate with property managers so residents keep moving, and we carry enough parts on the truck to finish most shared-gate repairs in one trip.
Deeper than the original, usually. Most 1990s and 2000s gate posts in Round Rock were poured at 24 to 30 inches, and after two decades of clay movement, that’s not enough. We typically go 36 to 42 inches and widen the footing so the post has more mass resisting the swell and shrink. It’s the difference between a gate that stays plumb for decades and one that’s leaning again in five years.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Round Rock since 2001. Hal has been welding and repairing gates for over two decades and still answers the phone himself when you call (877) 610-2993.