Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Round Rock: Honest Diagnosis and a Fix That Lasts
Most gate repairs in Round Rock are not what the homeowner thinks they are. A gate that grinds, binds, or trips the opener usually traces back to the hinge post leaning out of plumb in Blackland Prairie clay, not to a failed motor. We come to your driveway, find the actual cause, and fix it in place, which is the only way a repair holds through the next wet season and the next 100-degree stretch. Round Rock’s clay soil torques posts slowly and relentlessly, and most “broken opener” calls we answer are really structural problems misdiagnosed as electronics. Call us at (877) 610-2993 and we will tell you what is actually happening before we touch a single component.
Fast, Reliable Gate Repair Across Round Rock
If you live in Round Rock, you already know how fast a gate problem becomes a daily headache. The gate is how you leave for work on Brushy Creek Road, how your kids get to school in Teravista, and how you make sure nobody wanders up the driveway in Paloma Lake. When it stops opening, the whole schedule stops with it.
We are Gatewood Fence and Gate, locally owned and owner-operated since 2001. Hal Gatewood’s name is on the shop, his license number is published, and the person who shows up to your gate is the person who will answer when you call back. We serve all of Round Rock including 78664, 78665, 78681, and 78682. We know the neighborhoods, the HOA gate standards, and the way the clay under this city moves. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a call center three states away. You call, a person picks up, and we get you on the schedule.
Why Gatewood Fence & Gate Is Round Rock’s Preferred Gate Repair Company
We have been fixing gates in Round Rock long enough to know that every subdivision here has its own failure pattern. Gates in Teravista deal with clay heave under the hinge posts. Gates in Stone Canyon bake in full afternoon sun and develop weld cracks at the stress points. Gates in older sections near downtown Round Rock were often hung on shallower footings than anything built today, and they show it after two decades.
Our reputation in Round Rock comes from doing the unglamorous work correctly. We reset posts with deeper concrete footings and rebar when the soil has won the argument. We weld cracks instead of hiding them under paint. We re-hang gates so they swing true, and we do not sell you an opener when the post is the problem. Our customers leave reviews that mention the same things: we showed up when we said, we diagnosed the problem honestly, and the gate still works months later. Every job we do in Round Rock carries the 90-Day Done Right Promise in writing. If it is not right, one call brings us back.
Response time to Round Rock is same-day for most repair calls. We keep our schedules open for emergencies because we know a gate stuck open at midnight in a neighborhood like Paloma Lake is a security problem, not an inconvenience. Call (877) 610-2993 and we will tell you when we can be there.
Our Gate Repair Services in Round Rock
Hinge and Post Repair
In Round Rock, hinge and post repair is the foundation of nearly everything else we do. The Blackland Prairie clay under this city swells after heavy rain and contracts during drought. Over ten or twenty years, that cycle pushes gate posts out of plumb inch by inch. A post that leans even one inch is enough to bind a swing gate leaf against the latch side and overload the motor. We dig out the old footing, pour deeper concrete with rebar, brace the post true, and only then re-hang the gate. Fix the panel without fixing the post and you will fix it twice.
Gate Realignment
Round Rock’s ornamental iron driveway gates, the ones that define the entrance to so many homes in Teravista, Paloma Lake, and Stone Canyon, are heavy. A 12-foot or 16-foot leaf of steel is a lot of mass swinging on two hinges, and when those hinges settle or the post shifts, the gate drops. It scrapes the driveway, misses the latch, or binds the opener. Realignment means adjusting the hinge plates, shimming or replacing worn hinge bearings, and often re-setting the post if the lean is severe. We do this work on-site with a welding rig, so your gate never leaves your driveway.
Automatic Gate Repair
Openers in Round Rock work hard. They cycle against 100-degree heat in summer, ice in winter, and the slow structural drift of clay soil year-round. When an opener fails, we check the gate first. A gate that binds because of a leaning post will kill even a new LiftMaster or FAAC operator within months. Once we confirm the gate swings or slides freely, we repair or replace the operator, the control board, the limit switches, and the safety edges as needed. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we keep common parts stocked locally for faster turnaround in Round Rock.
Electric Gate Repair
Electric gate repair in Round Rock covers everything from the keypad and receiver at the street to the transformer and wiring at the operator. Many of the homes we work on in Brushy Creek and Teravista have systems that were installed 15 to 20 years ago, and the wiring at the hinge point is usually the first thing to go. We diagnose the entire circuit, repair or replace what is actually failed, and leave you with a gate that opens the way it should. Every price is quoted and agreed before any work starts, and the quote does not move at the door.
Weld and Rust Repair
Round Rock summers exceed 100 degrees regularly, and that heat expands steel frames and cracks old welds at the hinge post and the latch stile. Those hairline cracks get worse with every cycle. We weld them on-site, grind them smooth, and treat the area so it matches. For rust repair on slide gates and ornamental panels, we cut out the bad section, weld in new steel where it is structural, and treat and coat the rest. We do not replace a gate leaf that can be saved.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Round Rock
We are certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking, alongside LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Round Rock because HOAs in neighborhoods like Teravista and Paloma Lake often specify particular operator brands for their entry gates, and we can work on all of them. Because we keep common parts for these brands stocked, we can often complete a repair in a single visit instead of waiting on a shipped part. We service what is installed, and we do not push a replacement brand unless yours is genuinely beyond repair.
Common Gate Repair Problems We See in Round Rock Homes
- Post lean from clay heave: After a heavy rain season, the clay under Round Rock swells and pushes gate posts out of plumb. A gate that dragged or failed to latch right after a wet spring is almost always a post problem, and usually in the hinge post, not the panel.
- Opener overload from binding gates: Way too many openers get replaced in Round Rock because the gate was binding first. If the gate does not swing free, the motor works against resistance every cycle until the gearbox or control board fails. We check the gate before we touch the opener.
- Weld cracks at stress points: Steel expands in Round Rock heat, and the repeated expansion and contraction cracks old welds, especially at the hinge post and the latch stile. You will see a hairline crack widen over months until the panel sags visibly.
- Track problems on slide gates: Slide gates on Round Rock properties with expansive clay jump their tracks when the ground moves under the track supports. We see it after every heavy rain cycle, and the fix means re-leveling and re-securing the track, not just muscling the gate back on.
Pricing for Gate Repair in Round Rock, TX
We Also Serve Cities Near Round Rock
If you are outside Round Rock proper, we still cover the nearby area. Our Gate Repair team works in Hutto, Georgetown, Brushy Creek, and Pflugerville, and we bring the same upfront pricing and 90-Day Done Right Promise to every job. If your gate is acting up and you are anywhere in the Round Rock area, call us and we will tell you straight what it will take to fix it. And if you want to know more about what Gate Repair in Round Rock looks like from the inside, that page covers the full service area in detail.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Round Rock
Why does my Round Rock automatic gate keep going off track after every heavy rain?
The clay under your gate track is moving. Round Rock sits on Blackland Prairie expansive clay that swells when it absorbs water and contracts during drought. When it swells, it lifts and shifts the concrete pad or the track supports under a slide gate, and that throws the gate off its rollers. The permanent fix is to excavate under the track supports, pour deeper, reinforced concrete footings, and re-level the track. We do this work in Round Rock regularly, and it stops the problem instead of repeating it. Call (877) 610-2993 and we will tell you what your specific track needs.
The gate motor runs but my Teravista swing gate won’t move - is it the opener?
Probably not. When the motor runs but the gate will not swing, the usual cause in Teravista is a hinge post that has leaned far enough out of plumb to bind the gate leaf. The opener is running against a gate it can no longer move, and the clutch or gearbox may have already been damaged from the strain. We diagnose the post first. If the post is sound, then we move to the opener, the chain or belt, and the limit settings. But in a subdivision built on clay like Teravista, the post is the first suspect. We offer a free second opinion on any written estimate, so if another company told you it is the motor, call (877) 610-2993 before you pay for one.
How often should I have my ornamental iron driveway gate realigned in Round Rock?
Every two to three years is a good interval for a heavy ornamental gate in Round Rock, and more often after a very wet season or a hard freeze. The clay movement is slow, and a gate that is slightly out of alignment this year will be binding by next year. Catching it early means a simple hinge adjustment instead of a post reset and an opener replacement. We do not push maintenance plans, but if your gate is dragging, scraping, or latching hard, do not wait.
Can you repair the rust on my slide gate without replacing the whole leaf?
Yes, in most cases. We cut out the rusted section, weld in new steel where the rust has compromised the structure, grind the welds smooth, and treat and coat the surrounding area. Unless the rust has eaten through the main frame rails in multiple places, the leaf can be saved. We weld on-site, so your gate never leaves your driveway, and the repaired section is as strong as the original. The price is quoted before we start, and we do not recommend replacing a gate that can be repaired.
My gate opener works but the gate is noisy and shakes - what’s the fix?
Noise and shaking usually mean the gate is binding somewhere. The hinge post may have shifted, the hinges themselves may be worn or dry, or the gate may be sagging and dragging on the latch side. The opener then works harder against the resistance, and the vibration travels through the panel. We start by checking alignment and hinge wear, lubricate or replace what is needed, and then listen to the opener under load. On a gate that runs rough, the fix is usually in the hinges or the post, not the motor. Call (877) 610-2993 and we will find it.
Contact Gatewood Fence & Gate for Round Rock Gate Repair
If your gate is acting up in Round Rock, call us at (877) 610-2993. A live person answers day or night. We will ask what is happening, tell you what we think is going on, and schedule a time that works. The estimate is free, the price is agreed before we start, and the job carries the 90-Day Done Right Promise in writing. Whether you are in Teravista with a leaning hinge post, in Stone Canyon with a cracked weld, or anywhere else in Round Rock with a gate that will not cooperate, we will come out, find the real problem, and fix it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Round Rock and the surrounding Central Texas area since 2001.