Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Round Rock
If you have a sagging gate at the front of your drive in Round Rock, the fix usually starts at the post, not the hinges. That’s the first thing we check. Gate Wood Fence & Gate has been doing gate installation and repair since 2001, and we have built a lot of our time in Round Rock working inside HOA communities like Paloma Lake, Stone Canyon, and Teravista, where the soil moves and the rules are tight. You can reach Hal at (877) 610-2993 any hour. A live person answers, and we’ll give you a straight answer about what your gate needs before any work starts.
Why Gatewood Fence & Gate Is Round Rock’s Preferred Gate Installation Company
Hal Gatewood started this shop over twenty years ago, and his name is still on every invoice. That matters in Round Rock because a lot of the gates we fix were installed when the neighborhoods were first going in. The work has aged, and so have the mistakes that got made back then. We have seen gates that were never set on proper footings, operators wired with undersized cable, and welds that look fine until the first hard summer. Our crew has worked in Round Rock enough to know what the 1990s-2010s construction stock looks like, and what it takes to correct it.
You will get a real person on the phone, all day and night. Not a voicemail. Not a call center. And if you want to see us before you hire us, our trucks run through Round Rock every week. Hal has been serving this area long enough that he will tell you what a gate should cost and what should raise an eyebrow. The 90-Day Done Right Promise is in writing on every job, and if something is not right, you make one call and we come back.
Our Gate Installation Services in Round Rock
Whether your HOA requires a double swing gate that matches a specific ornamental iron pattern or you need a pedestrian gate that does not let the dog out, we handle the whole job from post hole to final walkthrough. Every installation starts with the gate design, then the post footings, then the hang, then the operator and safety systems. Here is what we most often install in Round Rock.
Driveway Gate
The majority of our driveway gate work in Round Rock happens in HOA-governed communities where the gate has to match the rest of the street. Homeowners in Teravista and Paloma Lake often need a gate that is a specific height, a specific finish, and a specific iron pattern. We have coordinated with architectural review committees enough to know what paperwork helps and what gets a design rejected outright. A new automated driveway gate in Round Rock normally runs $3,800 to $9,500, depending on the span, the operator, and whether we are reusing the existing posts.
Pedestrian Gate
Pedestrian gates matter for the side yard, the pool equipment, and anywhere the HOA wants a matched entry without a full driveway opening. In Round Rock subdivisions, these gates are often built from the same ornamental iron as the main gate, just smaller. We set the posts deep and pour concrete footings that can survive the clay. A typical pedestrian gate installation runs $850 to $2,400, including the hardware and the post work.
Sliding Gate
Sliding gates work well on longer Round Rock driveways where a swing gate would block the street or conflict with a slope. They are also the gate style that suffers the most when the frame warps in summer heat. We install sliding gates on steel v-track and cantilever systems, and we pay close attention to the structural post base because Blackland Prairie clay moves a lot. A slide gate install in Round Rock typically falls between $4,200 and $11,000, depending on the length and the operator package.
Swing Gate
A double swing gate is the default look in most of Round Rock’s master-planned neighborhoods, and we install plenty of them. We favor linear screw-drive or articulated-arm operators from FAAC and Linear for double gates because they handle the weight well and the boards are easy to service. A single swing gate install usually runs $3,400 to $8,200; a double swing gate with a matched pair of operators starts around $5,200 and can reach $12,500 on a wide custom opening.
We also provide Gate Installation of every type, so you don’t need to call three companies for one opening. One crew does the whole thing, from concrete to control board.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Round Rock
We are certified to work on FAAC, BFT, Linear, and Viking operators, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because your HOA may already have a specific brand in mind, or your subdivision’s entry gate may use one system while your personal driveway gate uses another. We keep common parts on the truck for most of these brands, which means we can often fix a dead opener in Round Rock the first time we come out, instead of coming back after a part arrives from somewhere else.
Common Gate Installation Problems We See in Round Rock Homes
Here is what the work actually looks like in this part of Williamson County. These patterns repeat all over Round Rock.
- Posts leaned out of plumb from Blackland Prairie clay. In neighborhoods like Paloma Lake, the soil swells in wet seasons and contracts hard in droughts. A gate that binds the operator after every storm may be sitting on a post that moved a half inch off true. We fix the post first, then the electronics.
- HOA rejections after materials are bought. It is common for a homeowner to order a gate online, then learn the architectural committee wants a different iron pattern or a specific powder-coat finish. We help you get approval before you spend the money, not after.
- Operators burned out from a warped steel frame. Round Rock sees summer days over 100°F. Steel expands, frames twist, and the motor works against resistance until the board fails. A new operator on a binding gate is a temporary fix. We check the frame and the post alignment before we touch the electronics.
- Community entry gates that quit recognizing resident vehicles. At subdivisions like Stone Canyon, a failing loop detector can leave residents queued at the keypad in the evening. We handle shared entry systems, including coordination with the property management company and the resident keypad/phone entry system.
Pricing for Gate Installation in Round Rock, TX
You want honest numbers, so here they are. A driveway swing gate in Round Rock generally costs $3,400 to $9,500 installed. A double swing gate runs $5,200 to $12,500. A sliding gate on a long driveway is $4,200 to $11,000. A pedestrian gate is $850 to $2,400. What pushes the number up is the operator line you choose, whether we are replacing or reusing posts, and how much fabrication is required to match the HOA’s ornamental iron. We quote the full price before any work starts, and the number we quote is the number you pay. No trip charge inside the county, and a free second opinion on any written estimate from another local company. Call (877) 610-2993 for an exact quote; estimates are free.
We Also Serve Cities Near Round Rock
We run trucks through Hutto, Georgetown, Brushy Creek, and Pflugerville regularly, so if your property is right on the Round Rock line, do not assume we will not come. A lot of our work in Round Rock also takes us a few minutes north or east for repeat customers. Same owner, same phone number, same guarantee.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Round Rock
Start by pulling the architectural modification request form from your HOA management company. In almost every Round Rock master-planned community, the committee will want to see a scaled drawing of the gate, the exact iron pattern, the height, the finish color, and often the operator position. We can prepare a submittal package that includes all of this. If the HOA wants a specific ornamental iron style that the current fence already shows, we match it. We do not start construction until the approval is in writing. Call (877) 610-2993 and we can talk through what your specific community requires.
Probably a post fix, and you may not need the electronics at all. A gate leaf that tilts means the post has moved out of plumb, usually from clay soil movement. When that happens, the gate binds against the operator, the motor strains, and the control board eventually fails. We re-pour the post footing, set the post straight, rehang the gate, and only then test the operator. That order saves you a lot of money. Call (877) 610-2993 and we can put eyes on it, usually same day.
Yes. On a small lot, a slide gate often needs a cantilever system because there isn’t room for a ground track. We can build the steel frame in our shop, powder-coat it in the HOA-approved finish, and use a Linear or FAAC operator with the control board mounted off the ground. The ornamental iron pattern can be welded onto the frame to match the rest of your fence. The install usually runs $4,500 to $10,000 on a small lot in Round Rock depending on the span, and we submit the HOA drawings before we order steel.
UL 325 is the national safety standard for automated gates, and it requires external entrapment protection devices, like photo sensors or an edge sensor, on any new operator installation. Every gate we install in Round Rock includes a primary and secondary entrapment protection system that meets UL 325. Many Round Rock HOAs and management companies ask for proof of compliance before a final inspection. We provide that documentation as part of the installation, and we coordinate the inspection with the HOA or the management company. Call (877) 610-2993 for the details on your specific gate.
If the gate faces the street or is visible from a community road, the HOA cares a lot about the solar panel placement and the operator housing. They often want the panel low profile or mounted away from the road. We install solar packages from FAAC and BFT, and we run the wiring to keep the board cool in Round Rock summer heat. A solar opener install in the 78682 area typically runs $2,800 to $5,500, and we include the entrapment protection required by UL 325. Call (877) 610-2993 and we will quote it properly.
If you have an old gate in Round Rock that has been struggling through every hard summer, or you are building new and the HOA is already asking questions, call Hal at Gatewood Fence & Gate. We will tell you what the gate needs, what it should cost, and when we can be there. The number is (877) 610-2993.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Round Rock since 2001.