Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Greeneville
When a gate motor quits in Greeneville, it is rarely a convenient time. You are either stuck in the driveway or leaving a property unsecured. We get it. Gatewood Fence & Gate has been fixing and installing gate motors and openers in Greeneville since we first started turning wrenches on them in 2001. Hal Gatewood owns the shop and still takes the calls. A gate motor repair or replacement in Greeneville typically runs $240 to $680 for the motor itself plus labor, with slide motor work landing between $380 and $1,100 depending on the rack and the opener’s duty cycle. Most repair calls are handled same day or next morning. Call (877) 610-2993 and a live person answers, not a recorded message.
Why Gatewood Fence & Gate Is Greeneville’s Preferred Gate Motor & Opener Company
Greeneville is not Johnson City. It is not Kingsport. The gates here are different because the ground here is different. The Nolichucky valley freezes and thaws in cycles that push post footings out of plumb every winter. A motor that worked fine in October is binding by February because the post moved half an inch. National gate companies send a tech from Knoxville or Asheville who has never dealt with Greeneville’s particular brand of clay soil and cold air pooling. Hal and his crew know that a gate sagging in the hinge post, not in the middle, is where you start. That is the kind of local knowledge that keeps us the first call for Gate Motor & Opener work around here.
Hal Gatewood’s name is on the shop and on every invoice. He has been at this since 2001, and he answers his phone around the clock. A live person, 24/7. That matters when your gate is stuck open at 9:30 on a Sunday night and your cattle are looking at the road. We do not route calls to a call center. We do not send a stranger. The person who shows up is the person whose reputation is on the line. Greeneville customers have called us back for a second job because the first one was done right and the price we quoted was the price they paid. Every job carries the 90-Day Done Right Promise in writing. If it is not done right, we make it right. One call brings Hal back.
We are locally owned and owner-operated. Background-checked, uniformed technicians on every job. Certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. No trip charge inside the county. A free second opinion on any written estimate. Those are not gimmicks. Those are the terms Hal has run his business on for over two decades.
Our Gate Motor & Opener Services in Greeneville
Motor Repair
A dead motor in Greeneville is often not a dead motor. The control board burns out, a limit switch fails, or the capacitor gives up. We troubleshoot before we replace. Hal fixes the gate in your driveway rather than hauling it off or swapping parts that do not need swapping. On older Greeneville properties, especially in the historic district where gates hung before modern safety edges existed, we see obsolete control boards that cannot be sourced anymore. When that happens, we tell you straight: here is what a retrofit costs, here is what a repair costs, and here is why one makes more sense than the other.
Motor Installation
New motor installation in Greeneville means matching the opener to the gate’s weight, swing arc, and the post condition underneath it. A motor bolted to a heaving post will fail early. We set posts in concrete below the frost line, or we retrofit existing posts with reinforcement before we hang a new opener. For residential driveway gates in the 37743 zip and rural properties in 37744 and 37745, we measure, quote, and install at a time that works for you. Never a surprise invoice at the door. The price is agreed before we start, in writing.
Linear Motor
Linear motors, particularly the Linear brand openers on older residential gates around Greeneville, are workhorses until they are not. We service Linear motors with the same repair-first mindset we bring to everything. If a Linear motor has a burned relay or a failed transformer, we replace the part and test the gate’s full travel before we leave. If the motor housing has taken on water from years of valley humidity, we will show you the corrosion and explain why replacement is the cheaper answer.
Slide Motor
Slide gates in Greeneville are common on farms and on wider driveway openings. The rack and pinion on a slide motor strips when the gate binds. And the gate binds when the post heaves or a wheel bearing seizes. We fix the cause, not just the symptom. Slide motor replacement in Greeneville runs $380 to $1,100 for most residential and light farm gates, including the new rack if the old one is stripped. For a slide gate that shudders and stops halfway, we start at the track and the post, not at the motor. Show Hal a gate closing on its own and he will show you where it is failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greeneville
We are factory-trained on the brands Greeneville homeowners and farmers actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common Linear and LiftMaster parts stocked locally for Greeneville calls, so repair work does not wait on a truck from Nashville. If you have a Ghost Controls opener on a farm gate in 37744 or a Viking slide motor down in the valley, we handle it. No brand loyalty games. We fix what is there.
Common Gate Motor & Opener Problems We See in Greeneville Homes
- Post heaving after freeze-thaw cycles. Cold air pools in the Nolichucky valley and ground frost pushes post footings up through winter. A post that moves a quarter inch throws the gate out of alignment, and the motor strains against the binding hinge until it overheats.
- Obsolete control boards on legacy operators. Greeneville’s in-town historic homes often have gate openers from the 1990s. When the control board dies, the replacement board is no longer manufactured. We can sometimes retrofit a modern board, and sometimes the only honest answer is a new operator.
- Rack and pinion stripping on slide gates. Rural driveways and farm entrances in 37744 and 37745 run long slide gates over uneven ground. The rack strips when the gate binds, and the motor keeps pushing until something gives.
- Corroded hinge plates on old tube gates. Moisture trapped against fence posts eats through the bottom hinge plate over decades. We weld new plates on-site, which most gate companies are not equipped to do.
Pricing for Gate Motor & Opener in Greeneville, TN
A straightforward motor repair in Greeneville typically runs $240 to $480. That covers the diagnostic time, the part, and the labor to get the gate opening and closing again. A full motor replacement on a residential swing gate starts around $520 and goes to $1,200 depending on the operator’s horsepower and whether we are reinforcing the post at the same time. Linear and slide motor work lands between $380 and $1,100 with the rack. Battery backup installation adds $180 to $400. Every quote is written, and the price is agreed before any work starts. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Greeneville
While this page is for Greeneville gate motor and opener service, our crew regularly runs out to Jonesborough, Morristown, Erwin, and Newport for gate motor repairs and new opener installs. Same owner, same 90-Day Done Right Promise, same live person on the phone.
Serving Greeneville, TN - Our Local Coverage Area
We’re based in the Greeneville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Greeneville
The freeze almost never kills the motor. The freeze heaves the post footing, the gate binds against the hinge, and the motor trips its thermal overload or strips the drive. We see it every January and February in the Nolichucky valley. We cut out the old footing, set a new post in concrete below the frost line, and realign the gate so the opener stops fighting it. Call (877) 610-2993 and we will have someone out to look at it, usually the same day.
Yes. We do this regularly on farm gates in the 37744 and 37745 zips. The old tube gate itself is usually fine. We weld a new mounting plate for the LiftMaster arm, reinforce the hinge post if it has corroded, and wire in the new operator. The gate stays in place. No hauling, no replacement of a gate that still has twenty years in it. A retrofit like that typically runs $520 to $900 including the operator and the welding.
Usually not. The control boards for most 1990s openers are no longer manufactured, and any board you find on a shelf has been sitting for a decade. The honest answer for older Greeneville homes is a new operator installed on the existing gate. A new LiftMaster or Linear opener with modern safety edges and a battery backup runs $600 to $1,200 installed, and it will last longer than a scavenged board. Call (877) 610-2993 for a free second opinion if another company quoted you a repair.
The gate is binding. Either the post has heaved out of plumb or a wheel bearing on the track has seized. The motor is pulling harder than it should, and the rack and pinion is taking the abuse. We level the track, replace the bearing, and realign the rack. If the rack is already stripped, we weld in a new section or replace the whole run. Slide gate repair in Greeneville typically runs $240 to $680 depending on what we find under the gate.
If you have livestock, yes. Ice storms in the Nolichucky valley knock out power on rural county roads, and a gate that will not open during an outage is a real problem. A battery backup on a residential or farm opener adds $180 to $400 to an install, and it keeps the gate functioning through most outages. If your gate is the only way in or out, it pays for itself the first time the power drops. Call (877) 610-2993 and we will quote it as part of the job.
If your gate motor is dead, limping, or just making a sound it did not make last year, call (877) 610-2993. Hal or one of his crew will answer. We will talk through what is happening, give you an honest range before we come out, and show up when we say we will. Free estimates. No trip charge inside Greene County. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Greeneville since 2001.