Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Newport, TN
Gate repair in Newport typically runs $165 to $480 for most hinge, post, realignment, and latch jobs, with full opener replacements landing between $850 and $2,200 depending on the drive system. We can usually have someone at your gate within a few hours if you’re anywhere in the 37821 or 37822 zip codes. Call (877) 610-2993 and a live person answers, day or night.
We’re Gatewood Fence & Gate, and Hal Gatewood has been at this since 2001. Newport sits where the Pigeon River and French Broad River meet, and that valley humidity is hard on gates. We know the roads here, we know the lots, and we show up when we say we will. The name is on the shop, and the shop is down the road - that is the oldest accountability there is.
Why Newport Homes Are Different
Newport’s geography shapes every gate job we do. The confluence of the Pigeon River and French Broad River traps moisture in a way that rots metal faster than in drier towns just a few miles away. Tube-steel farm gates that would last ten years in Morristown or Greeneville often seize up here in five. Hinges, latch bolts, and frame welds all take a beating from that persistent humidity.
Then there’s the flooding. After a good river rise, gates on low-lying lots off River Road and Rankin Hill come back caked in silt inside their track channels, with latch bolts corroded stuck. We keep track-cleaning tools and penetrating lubricant on every truck because around here, post-flood gate realignment isn’t a specialty job. It’s a regular Tuesday.
Homes on the hillsides have the opposite problem. Long, sloped driveways off Cosby Highway and the hollows toward Parrottsville complicate swing-gate hinges and opener alignment. Hanging a gate on a grade takes a different approach than hanging one on flat ground, and we see plenty of both in Cocke County.
Gate Repair in Newport
Most gate repair calls in Newport come down to three things: a hinge that’s given out, a motor that’s dead, or a panel that’s sagging into the gravel. We fix all three, and we get to you quick. Our trucks carry parts for FAAC, BFT, Linear, and Viking systems, plus LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule - nine major brands, stocked locally so we aren’t waiting on shipping while your gate hangs open.
We quote every job before work starts, and the price you hear is the price you pay. No trip charge inside Cocke County. Here’s what Newport homeowners typically see:
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. On the sloped driveways common along Old Asheville Highway and the hollows off Highway 321, hinge posts take brutal lateral load. Add Newport’s year-round moisture and you get post footings that rot, shift, or pull loose in saturated ground. We dig out the old footing, weld or brace the post true, and re-hang the gate so it swings clean without dragging. Hinge or post repair on a single swing gate in Newport runs $165 to $340. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Riverside properties in Newport deal with something hill towns don’t: high-water events that knock gates off their tracks and shift post positions in soft ground. We realign slide gates, reset track rails, and get the gate moving smoothly again. If the rack and pinion is chewed up from the gate jumping under load, we replace the rack section and re-time the opener rather than selling you a whole new drive. Gate realignment on a sloped driveway in Newport typically costs $180 to $380. Show me the gate closing on its own and I’ll show you where it’s failing before you pay for anything.
Weld & Rust Repair
Newport sits where the Pigeon River and French Broad River meet, and that confluence traps humidity in a way that rots metal faster than in drier parts of the county. Tube-steel farm gates rust through at the bottom rail, ornamental iron cracks at old welds, latch bolts corrode stuck. We grind out the rust, weld in new steel on site, and treat the repair so it holds. Weld repair on tube-steel or iron gates in Newport runs $120 to $275. If a gate is worth saving, we save it. We stock repair steel and replacement hardware locally, so turnaround on weld jobs in the 37821 area is usually same-day.
Learn more about our full Gate Repair capabilities.
Why do my gate hinges keep sagging on my sloped driveway in Newport?
Because the hinge post is taking lateral load it was never set to handle. Sloped driveways in Newport’s hollows and hillsides put constant downhill pressure on swing gates, and after a few years of that plus the valley’s wet soil, the post footing shifts and the gate sags. The real fix is correcting the hinge post and re-hanging the gate so it pulls true, not just shimming the hinges. Call (877) 610-2993 for an exact quote - estimates are free.
Why is my slide gate making a grinding noise after the river flooded?
Silt and fine gravel packed into the track channel, and it’s grinding between the rack and pinion gear. If you keep running the gate that way, you’ll strip the pinion or burn the opener motor. Shut the opener off and call us. We’ll clear the track, flush the channel, re-grease the rack, and check the pinion for wear. A post-flood track cleaning in Newport runs $95 to $180, and if we catch it early we can usually save the drive. Call (877) 610-2993.
Gate Installation in Newport
A new driveway gate in Newport, TN typically runs $3,800 to $14,000 installed, depending on whether you need a single swing gate, a wide double gate, or a sliding gate on a grade. Solar-powered openers usually add $1,200 to $3,400 to that number when running power from the house isn’t practical. We’re Gatewood Fence & Gate, and Hal Gatewood has been building and hanging gates since 2001. The name is on the shop, and we answer the phone when you call.
Driveway Gate Installation
Most Newport homeowners on rural lots need a wide driveway gate that can handle a truck, a trailer, or farm equipment. We hang single and double driveway gates on posts set below frost line, sized for the gate’s weight rather than the cheapest post that will stand up straight for one season. A single swing driveway gate, steel or aluminum, installed on new posts in Newport typically runs $3,800 to $7,500. On sloped Cocke County driveways, hinge alignment is everything, and we get it right the first time.
Sliding Gate Installation
Sliding gates make sense on Newport lots where a swing gate would need to clear parked cars or fight a steep grade. The problem here is the river silt. After Pigeon River or French Broad water rises, slide tracks fill with mud and the rack-and-pinion drive grinds. We install slide gates with elevated tracks and sealed bearing rollers where we can, and we size the operator for a gate that has to push through East Tennessee grit. A sliding gate on a prepared track in Newport starts around $5,500 and goes up from there with grade work and operator choice.
Swing Gate on Grade
A swing gate on a long gravel driveway off Highway 25/70 has to deal with the slope, the frost, and the humidity. We set posts deep below frost line, use reinforced hinges on heavy farm-style tube steel, and build in adjustment room so the gate doesn’t sag into the latch post after two wet winters. A double gate for a wide farm entrance in Newport runs $6,000 to $14,000 depending on width and materials. We also wire the opener for cold weather; ice storms seize cheap operators on north-facing slopes around Newport every year.
See our full Gate Installation options and photo examples.
Do I need a solar gate opener for my Newport driveway if I’m far from the house?
Yes, if running power from the house means trenching more than about 200 feet, solar is usually the better and cheaper call in Newport. A solar opener with two deep-cycle batteries and a properly sized panel handles the 10 to 20 open-close cycles a day most rural driveways see. We installed one on a long sloped driveway off Highway 25/70 in the Cocke County hollows where running mains power was impractical. Solar openers add $1,200 to $3,400 installed. Call (877) 610-2993 and we’ll assess your site honestly.
Why does my swing gate keep sagging, even after I tighten the hinges?
Because the hinge post is moving, not the hinges. In Newport’s soft riverside soil and on sloped hollow driveways, a post set at shallow depth or in loose backfill will lean under the gate’s weight inside a couple of seasons. Tightening hinge bolts does nothing for a creeping post. We dig out the old footing, set a new post below frost line with proper concrete, and re-hang the gate with reinforced hinges. The price is quoted before any digging starts. Call (877) 610-2993.
Gate Motor & Opener in Newport
A gate motor or opener in Newport, TN typically costs $425 to $1,850 installed, depending on whether we’re repairing an existing operator or putting in a new one on a long rural driveway. Most repair calls in the 37821 and 37822 zip codes are handled same-day or next morning, because we keep parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule stocked locally. If your gate won’t open at 7 a.m. on a Tuesday, call us.
Motor Installation
New motor installation in Newport usually falls between $850 and $1,850, with the price driven by gate span, grade, and whether you want a battery backup or solar. A 14-foot tube-steel farm gate on a sloped driveway off Cosby Highway needs a heavier operator than a flat suburban driveway gate in town. We measure, quote a written price, and you approve it before a single bolt comes off the shelf. The price is the price.
Motor Repair
Most motor repairs in Newport run $145 to $420, and we can typically get you running the same day. Corroded limit switches, seized gears, overloaded thermal protection from silt-packed tracks, burned circuit boards after an ice storm - we carry common replacement parts in the truck. That matters when your gate is stuck open and the horses are looking at it. We don’t pad the bill either way; Hal or his crew will tell you if it’s a $40 fix or a full replacement.
Slide Motor Service
Slide gates are everywhere on the rural outskirts of Newport, especially where driveways meet the highway at an angle and a swing gate would block traffic. Slide motor repair here runs $180 to $520, plus track realignment if flood debris knocked the gate out of true. We clean silt out of the channel, check the rack and pinion for wear, and test the entrapment sensors before we leave. After any significant flood event, gates on low-lying riverside lots come out caked with river silt inside the track, and the motor overdraws trying to move the gate until the channel is cleaned.
Details on every opener we work with are at Gate Motor & Opener.
Do you recommend solar-powered gate openers for rural acreage entrances in Cocke County?
Yes, for the right site. On a south-facing slope with clear sun exposure, a solar gate opener with a properly sized battery bank handles a 12 to 16 foot farm gate fine. In a north-facing hollow or under heavy tree cover, solar struggles in winter and you’re better off running conduit from the house panel. We’ll assess the site honestly and tell you which one actually fits your property. Solar gate opener installation starts around $1,400. Call (877) 610-2993 for an exact quote, free.
My gate sags on the hinge side and the opener struggles. Is that a motor problem?
Usually not. A gate sags in the hinge post, not in the middle, and the motor is working against the sag. Fix the post or rebuild the hinge, square the gate, and the motor usually stops straining. Sometimes the motor’s already damaged from months of fighting the load, and then we replace or rebuild it. But the post comes first. Call (877) 610-2993 and we’ll tell you which it is.
Gate Access Control in Newport
Gate access control in Newport, TN typically runs $340 to $2,800 depending on whether you’re adding a keypad to an existing opener, replacing a corroded control board, or wiring a full video intercom system. We service Newport properties in 37821 and 37822, and we answer the phone with a live person around the clock. If your gate won’t respond to the keypad after a storm or the remote stopped working overnight, we’ll send Hal or one of his crew.
Keypad Entry Systems
Keypads are the most common access control method we install and repair in Newport. We wire them to gate operators from FAAC, Linear, Viking, and BFT, and we set them up with secure codes you can change yourself. In Newport’s river-valley humidity, keypad circuit boards corrode faster than in drier towns like Morristown, so we use sealed enclosures and weatherproof conduit on every outdoor install. A typical keypad replacement in Newport runs $180 to $420, and a new keypad wired to an existing opener is $340 to $690.
Video Intercom
Video intercom lets you see who’s at the gate from your kitchen or your phone. For Newport homeowners with long driveways off Highway 25/70 or up in the Cocke County hollows, this is about not walking down 400 feet of sloped gravel in the rain to tell a stranger you don’t need firewood. A full video intercom system for a Newport gate runs $1,200 to $2,800 installed, depending on whether we’re running new wire or using a wireless unit. We recommend hardwired systems wherever possible because Wi-Fi signal through the hollows can be spotty.
Remote Control & Programming
We program remotes to nearly any opener you have, including LiftMaster, DoorKing, and Ghost Controls systems already installed on Cocke County farm-style tube-steel gates. If your remote stopped working but the keypad still opens the gate, the receiver board is likely the culprit, not the remote. Remote programming in Newport runs $85 to $165, and replacement remotes are $45 to $90 each. We can program visitor remotes with temporary codes so contractors or family from out of town can get in without you sharing your permanent code.
Explore all Gate Access Control options for your property.
Why does my slide gate keypad work, but the gate won’t move after a French Broad flood?
The keypad is sending the signal, but the gate cannot physically move because river silt has packed into the slide-gate track channel and jammed the rack-and-pinion drive. We clean the track channels, free the mechanism, and recalibrate the operator so the limit switch stops tripping. Call (877) 610-2993 and we’ll get it moving again, usually the same day.
How often should I have my tube-steel farm gate’s keypad and latch serviced in this river-valley humidity?
We recommend an annual service for tube-steel gates in the Newport valley, and every six months for gates on low-lying riverside lots. Humidity sits inside the frame welds and promotes rust from the inside out. Catching corroded keypad contacts or a stiff latch early is cheaper than replacing a seized assembly later. Call (877) 610-2993 to get on the schedule.
Gate Parts & Welding in Newport
If you’re standing in your driveway on a Newport morning watching a gate that won’t latch, sags into the dirt, or has a hinge that finally tore loose, you need someone who will show up with a welder and a plan, not a salesman with a catalog. Hinge replacement in Newport typically runs $145 to $385 depending on whether the post needs re-seating or the hinge needs fabrication on site. Post replacement usually lands between $320 and $780. We handle both, and we do the welding in your driveway where you can see it.
Hinge Replacement
When a swing gate drags in Newport, the first thing we check is the hinge post, not the gate panel. A gate sags in the hinge post, not in the middle, and that is where we start. We remove the old hinge, grind the post surface clean, and weld a new hinge in place at the correct load angle. Barn-style drives off Highway 25E and the sloped lanes up toward Parrottsville need heavier hinge barrels and a slight cant inward to account for grade. Typical hinge replacement runs $145 to $385 per hinge.
Post Replacement
Rotted wood posts and rusted steel posts are both common around Newport, especially on lots near the Pigeon River where groundwater stays high. We dig out the old post, set a new one in concrete, and weld or bolt the gate back while the post cures. If the gate frame was pulling, we true it before we hang it, so you aren’t paying twice. Post replacement in Newport generally runs $320 to $780 including concrete and hardware, depending on depth and whether the old footing needs breaking out.
On-Site Custom Welding
Some gates are worth keeping, but need new mounting plates, braces, or an extension because someone poured a wider driveway. We do custom welding on site, with the gate still in your yard. That matters because you can see the work before it’s painted and before we leave. Custom welding for gate modifications, brackets, and frame reinforcement in Newport typically runs $95 to $220 per hour plus materials, and we quote the job before striking an arc. I will be there myself, or you can drive to the shop and look me in the eye.
See everything we fabricate and stock at Gate Parts & Welding.
Is welding done on site or does the gate get hauled off?
Welding is done on site in almost every case. Hal will fix the gate in your driveway, where you can see the repair, rather than hauling it away. On-site welding is the default, not an upcharge. If the job is unusually large we might pull the gate to the shop, but we’ll tell you that upfront and quote it separately. Call (877) 610-2993.
How does Newport pricing compare to Morristown or Sevierville?
The ranges are similar across East Tennessee, but Newport’s riverside microclimate often means more corrosion-related prep work, so a hinge job here sometimes involves extra grinding and treatment time. You will still get a written price before any work starts. We also offer $40 off any repair over $200 and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for your exact quote.
Brands We Service in Newport
We keep parts on hand for nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means most repairs in the 37821 and 37822 area don’t wait on shipping. If we don’t have it on the truck, our Memphis office coordinates next-day delivery. See our brands for model-specific details.
Pricing for Gate Repair in Newport, TN
| Service | Typical range in Newport |
|---|---|
| Hinge or post repair (single swing) | $165 - $340 |
| Gate realignment on sloped driveway | $180 - $380 |
| Weld repair (tube-steel or iron) | $120 - $275 |
| Latch, lock, or hardware replacement | $85 - $210 |
| Electric opener repair | $190 - $450 |
| Full opener replacement | $850 - $2,200 |
| Single swing gate installation | $3,800 - $7,500 |
| Double driveway gate installation | $6,000 - $14,000 |
| Sliding gate installation | $5,500+ |
| Solar opener add-on | $1,200 - $3,400 |
| Post-flood track cleaning | $95 - $180 |
| Custom welding (per hour + materials) | $95 - $220 |
What pushes the price up in Newport: post depth in rocky or saturated soil, grade correction on sloped driveways, and corrosion prep on hardware that’s been sitting in river-valley humidity for years. Your price gets quoted and agreed before any work starts. Not an estimate you hope holds, a written number.
Neighborhoods We Serve in Newport
We work all over Newport and Cocke County, from the streets near the Cocke County Courthouse to the farm gates off Cosby Highway and the riverside lots near the Pigeon River. Typical response time is same day for repair calls, often within a few hours.
- Downtown Newport and the historic blocks around 37821
- Cosby Highway corridor and hillside properties off it
- Riverside lots near the Pigeon River and French Broad River
- Rural hollows and farmsteads across 37822
- Areas toward Parrottsville and Del Rio
Service Area - Cities Near Newport
We run regular service calls throughout East Tennessee. If you’re near Newport, TN, Morristown, TN, Jefferson City, TN, Sevierville, TN, Pigeon Forge, TN, or Greeneville, TN, we’re your closest gate specialist with local parts stock and same-day repair capability. Dispatch and scheduling are coordinated from our Memphis office; crews serve Newport locally.
Serving Newport, TN - Our Local Coverage Area
Gatewood Fence & Gate crews serve Newport and the communities around it; dispatch is coordinated from our Memphis office. The map shows the Newport coverage area; if your address is on it, we can help.
Also serving nearby: Newport, TN, Morristown, TN, Jefferson City, TN, Sevierville, TN, Pigeon Forge, TN, Greeneville, TN.
FAQs About Gate Repair in Newport
On a true emergency, like a gate that won’t close and is leaving animals or a driveway unsecured, we can typically reach most Newport addresses within a same-day window. Call (877) 610-2993 and tell us the address. We’ll tell you straight when the truck can be there.
Yes. We cover the 37821 and 37822 zip codes and run up into the hollows toward Parrottsville and out along Cosby Highway. If you’re on a gravel lane past the last streetlight, that is exactly the kind of driveway we’re used to. No trip charge inside the county.
If the repair we made fails within 90 days under normal use, we come back and make it right at no charge. It is in writing on every invoice. One call brings us back. No runaround, no voicemail, no dispatch queue. Call (877) 610-2993 if something isn’t holding.
Call (877) 610-2993 for a free estimate. A live person answers, day or night, and we’ll give you a real number you can count on before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Newport Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg