Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Greeneville
Gate parts and welding in Greeneville usually breaks down into two different worlds. In town, we see older wrought-iron and pipe-welded ornamental gates on historic homes that need hinges rebuilt and posts releveled. Out on the county roads, we see working farm tube gates that have been patched for 30 years and finally need the bottom rail welded back together. We handle both. Gatewood Fence & Gate has been locally owned and owner-operated since 2001, and our Gate Parts & Welding team welds on site so your gate never has to leave the property. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Greeneville’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice we hand you. That’s the oldest accountability there is. When we show up in Greeneville, you get a background-checked, uniformed professional who will walk the gate line with you before turning a wrench. We don’t haul your gate off to some facility two counties away. We weld it in your driveway or on your fence line, and you watch the work happen.
Serving Greeneville means we know what the Nolichucky valley does to steel and concrete. The freeze-thaw cycles here at roughly 1,500 feet are different from what you get in Knoxville or Nashville. Cold air pools in the valley, the ground heaves, and gate posts that were plumb in October are out of square by February. We set posts deeper and weld hinge plates to hold through those cycles. Every job in Greeneville carries our 90-Day Done Right Promise in writing. If something’s not right, one call brings us back. No runaround.
Our Gate Parts & Welding Services in Greeneville
Hinge Replacement
Hinge replacement in Greeneville is almost never just about the hinge. The hinge fails because the post moved, or because moisture sat against the plate for a decade and ate through the weld. We replace the hinge and we check the post, the panel weight, and the ground under the footing. In the 37743 and 37744 areas especially, we see worn barrel hinges on ornamental gates hung 40-plus years ago. We cut out the old, weld in new, and the gate swings clean again.
Post Replacement
Living in the Nolichucky valley means your gate posts fight the frost every winter. A sloped fence line or a driveway cut into a hillside puts lateral pressure on the post, and freeze-thaw cycling works the footing loose. We dig out the old post, set a new one in a deeper concrete footing below the frost line, and relevel the gate to match. Post replacement in Greeneville typically runs $380 to $650 per post, depending on depth, soil, and whether it’s a driveway gate or a farm gate carrying a heavier panel.
Rail Repair
Bottom rails on farm tube gates around Greeneville take the worst of it. Moisture gets trapped where the rail meets the post, the paint or galvanizing fails, and then the steel rusts through. We see this constantly along the county roads in 37744 and 37745. We cut out the rot, weld in a new rail section, and the gate is solid again for another 20 years. You don’t replace a good gate over a bad rail. You fix the rail.
Custom Welding
Some gates can’t be ordered from a catalog. Maybe you need a gate widened for a new tractor, or a latch plate relocated, or a section spliced in because the original panel was built for a different opening. We do custom welding on site in Greeneville for exactly those jobs. The gate stays on your property, we measure twice, and the work carries the same 90-Day Done Right Promise as everything else we do. Custom welding work in Greeneville generally runs $95 to $180 per hour plus materials, quoted before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greeneville
We’re certified to service nine major gate brands, and around Greeneville the ones we see most are Viking, DoorKing, and Elite operators on residential driveway gates. You don’t have to rip out a perfectly good opener because the control board glitched or a safety edge stopped reading. We stock common parts for these brands locally for Greeneville customers, which means faster turnaround when your gate is stuck and you actually need it working. If the operator is pre-UL 325 and has no modern entrapment protection, we’ll tell you honestly when repair isn’t the smart money.
Common Gate Parts & Welding Problems We See in Greeneville Homes
- Heaved hinge posts on sloped driveways. Greeneville’s rolling terrain means many driveways rise or fall from the road, and winter frost pushes posts up and out of plumb. The panel will be fine. The post will be the problem.
- Corroded bottom rails on farm tube gates. Along rural roads in 37744 and 37745, working cattle gates often sit with moisture trapped against the post, eating through the hinge plates and lower rail. These are welding jobs, not bolt-on fixes.
- Obsolete control boards on older automatic gates. Pre-UL 325 operators freeze, lose their limits, and leave gates stuck mid-travel during Greeneville’s ice events. We can often retrofit a modern board, but sometimes replacement is genuinely cheaper.
- Historic gates sagging into brick pillars. The in-town housing stock around Greeneville’s historic district includes some beautiful old iron gates mounted on brick or stone pillars that have settled. The gate isn’t broken. The foundation under the pillar has moved.
Pricing for Gate Parts & Welding in Greeneville, TN
Here’s what you can expect in the Greeneville market. Hinge replacement on a residential driveway gate runs $150 to $320, depending on hinge weight and whether we’re welding the plates on or bolting. Hinge post replacement runs $380 to $650 per post, as noted above. Rail repair on a farm tube gate runs $180 to $400, mostly materials plus a couple hours of cutting and welding. Custom welding is $95 to $180 per hour plus steel. Every price is quoted and agreed before any work starts. We don’t show up with one number and leave with another. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll put a number in writing before we touch the gate.
We Also Serve Cities Near Greeneville
If you’re just outside Greeneville, we cover Jonesborough, Morristown, Erwin, and Newport too. The same crews that weld on farm gates in the 37744 county roads handle residential driveway gates in town, and we’re on the road throughout Greene County. For more detail on what we do, see our Greeneville service area page.
Serving Greeneville, TN - Our Local Coverage Area
We’re based in the Greeneville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Greeneville
Greeneville sits at roughly 1,500 feet in the Nolichucky valley, where cold air pools and the ground freezes and thaws repeatedly through winter and early spring. That cycle heaves post footings upward and sideways, something flatter, lower-elevation cities don’t get to the same degree. The result is gate posts that tilt seasonally and hinges that bind. We set posts deeper than standard and relevel against the slope, which is the fix that actually holds here. Call (877) 610-2993 and we’ll come look at what the winter did to your gate line.
We weld it right where it hangs. That’s the whole point of on-site welding. On a cattle farm off a 37744 county road east of town, our crew re-welded a decades-old tube gate whose bottom rail and hinge plates had corroded through where they trapped moisture against the post. We cut out the rot, welded new hinge plates and lower rail sections in place, then reset the hinge post in a deeper concrete footing to stop the seasonal heave that had been throwing the gate out of square every spring. No hauling, no shop fee.
Replace it when the operator predates modern UL 325 entrapment protection, especially if the control board has failed and parts are no longer made for it. Greasing an obsolete board back to life leaves you with a gate that has no photo eyes, no reversing edge, and no modern safety logic. That’s a liability on your property, not a savings. For operators that are only a few years old and simply need a board swap or a limit reset, repair makes sense. We’ll tell you which one you’re facing, honestly, before you spend a dollar. Call (877) 610-2993 to have someone actually look at the operator, not guess over the phone.
Because the panel was never the problem. A gate sags in the hinge post, not in the middle. Older Greeneville homes in and around the historic district often have iron gates mounted on brick or stone pillars that settled decades ago. Fix the panel without the post and you’ll fix it twice. We relevel the post, reset the footing if it’s moved, and only then address the panel. The fix starts in the ground, not with a new gate.
Yes. Greeneville’s dual-market reality is exactly why welding capability matters here. In town, we repair ornamental iron and pipe gates on residential driveways. Out in the county, we weld up working farm gates on active cattle operations where the gate has to hold stock and function every day. Most ornamental gate companies can’t weld a 40-year-old tube gate back to life on a muddy fence line. We can, and we do. Call (877) 610-2993 and tell us what kind of gate you’re working with.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Greeneville and surrounding communities since 2001.