Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Greeneville
Gate repair in Greeneville usually takes one visit, and most hinge, post, and opener fixes run between $180 and $650 depending on what’s actually wrong. If your gate sags, won’t close, or the opener stopped working after the last freeze, call (877) 610-2993 and you’ll get a live person on the line, not a voicemail. We’ve been welding and repairing gates across Greene County since 2001, and we know exactly what the Nolichucky valley does to a gate over time: the frost heaves the posts, the humidity eats the hinge plates, and the ice loads strip opener gears. Hal Gatewood put his name on this shop, and he’ll put it on your repair too.
Key Takeaways:
- Most gate repairs in Greeneville cost $180-$650, quoted and agreed before we start.
- We answer the phone live, 24/7, and we’re not a call center.
- Every job carries the 90-Day Done Right Promise in writing.
- We weld on site. Your gate stays in your driveway.
Why Gatewood Fence & Gate Is Greeneville’s Preferred Gate Repair Company
Greeneville isn’t a town that tolerates a company that quotes one price on the phone and hands over a different invoice at the door. We don’t either. Hal Gatewood has been owner-operated since 2001, and his published address and license number are right there for anyone to look up. The name is on the shop, and the shop is down the road, which is the oldest accountability there is. When you call about a sagging gate off Snapps Ferry Road or a dead opener out toward the 37743 side of town, you reach a person who has actually driven those roads.
Our repair crews show up in uniform and background-checked. But more importantly, the person who shows up knows what he’s looking at. We see the same farm gates every other Greeneville homeowner sees: hand-welded tube steel that’s been patched three times, hinge plates rusted thin, posts leaning from the last thaw. We don’t try to sell you a new gate when a weld and a relevel will fix it. That’s not how we work, and it’s not how you should be treated.
We can usually have someone at your gate the same day you call, and we’ll tell you the price before we pick up a torch. Not an estimate range over the phone that doubles in your driveway. The number we quote is the number you pay.
Our Gate Repair Services in Greeneville
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Around Greeneville, frost heave in the Nolichucky valley pushes posts out of plumb every winter. We dig, relevel, and re-set posts in concrete, then weld or replace hinge plates so the gate swings true. We’ve done this on everything from ornamental iron at a Victorian-era home near the historic district to a double-wide tube gate on a cattle lane off 37744.
Weld & Rust Repair
This is the one most gate companies in East Tennessee won’t touch. We weld on site, which means we don’t haul your gate to a shop, and we don’t tell you to buy a new one. Rusted bottom rails, holes at the hinge plates, cracked welds, broken latch posts, all of it gets cut out and replaced with new steel. If you’ve got a 30-year-old farm gate that’s been patched and patched, don’t give up on it. Fix the panel without the post and you’ll fix it twice. Fix it right once.
Gate Realignment
Show me the gate closing on its own and I’ll show you where it’s failing. In Greeneville, freeze-thaw cycles throw swing gates out of plane every spring, and a gate that drags the ground puts stress on the opener motor. We relevel the gate, adjust the sags, shim the hinges, and set the latch so it actually catches. Many of these calls are on sloped driveways where the ground itself has moved under the posts. That’s normal here. It’s also fixable.
Electric Gate Repair
Greeneville sees ice storms that overload gate opener motors and strip rack-and-pinion drives. When an automatic gate fails after a freeze, it’s usually the gears, the circuit board, or the force settings. We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we keep the parts that Greeneville operators actually need. Same-day repairs are common, and we’ll set the opener’s torque and travel limits correctly, not just swap a board and leave.
Trusted Brands We Service in Greeneville
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers and gate systems. Most Greeneville gate calls involve a FAAC, BFT, or Linear operator on a driveway gate, and we keep replacement gears, boards, and remote-radio parts for those brands on our service trucks. That means fewer return trips and a faster fix. You shouldn’t have to wait a week for a part to ship from Nashville. If we don’t have it on the truck, Hal will tell you that up front.
Common Gate Repair Problems We See in Greeneville Homes
- Post heave from freeze-thaw cycling. At 1,500 feet in an Appalachian valley, Greeneville gets more freeze-thaw cycles than mid-state Tennessee. Cold air pools in the Nolichucky valley, and the ground swells and contracts every winter, pushing gate posts out of alignment by spring.
- Corroded hinge plates on old farm gates. Rural Greene County is cattle country, and decades-old tube gates corrode where moisture sits trapped against the fence post. The hinge plates and bottom rails rot first. Most companies won’t weld these on site. We do.
- Opener failure after ice storms. Ice loading strips rack-and-pinion drives and burns out motors on automatic operators across Greeneville every winter. A gate that’s frozen to the ground when the opener tries to move it is a common sight in the 37745 area.
- Loose ornamental gates on brick pillars. Older homes in and around the Greeneville historic district have ornamental iron gates mounted on brick or stone pillars that are slowly deteriorating. When the anchor bolts pull loose, the gate leans. We repair the mounting without replacing the pillar.
Pricing for Gate Repair in Greeneville, TN
Here are straight numbers for Greeneville. A typical hinge plate repair or weld patch runs $180-$300. Post releveling and re-setting is usually $300-$550, depending on how much digging and concrete work is involved. Opener repairs, including gears, boards, or force-sensor adjustments, generally land between $225 and $650. A full automatic gate realignment is usually $200-$400.
What affects the price the most in this area is ground condition. Slopped drives make post work slower, and rust-thinned tube steel sometimes needs more new metal than you’d guess from the outside. But here’s the part that matters: you’ll get the exact price before we start, and it doesn’t change at the door. We also offer $40 off any repair over $200 and a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we’ll talk it through.
We Also Serve Cities Near Greeneville
If you’re outside Greeneville proper but still in the surrounding area, we run repair calls to Jonesborough, Morristown, Erwin, and Newport regularly. Whether you’re on a county road between here and there or right in town, the person who answers the phone is the person who owns the company. Gate Repair in Greeneville is our home market, but we cover the roads around it too.
Serving Greeneville, TN - Our Local Coverage Area
We’re based in the Greeneville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Greeneville
Freeze-thaw cycling at 1,500 feet in the Nolichucky valley causes the clay-heavy soil around your posts to expand and contract repeatedly through winter. Each cycle nudges the post a little further out of plumb. That’s why Greeneville swing gates are often binding or dragging by February. The fix is to dig down past the frost line, re-set the post in concrete, and relevel the gate so it swings true. Call (877) 610-2993 for an exact quote; estimates are free.
Yes. It’s the most common farm gate repair we do in rural Greene County. We cut out the rusted steel at the hinge plates and bottom rails, weld in new plate steel, and rehang the gate so it clears the ground. Most ornamental gate companies can’t do this on site, but we can and we do. The gate stays in your pasture. You don’t haul it anywhere. $180-$300 is typical for a hinge plate repair, depending on how much new steel is required.
Ice storms cause two common failures here: the opener’s rack-and-pinion gears strip when the gate is frozen to the ground, and motors burn out from overloading. Sometimes the circuit board triggers a fault and won’t reset without a force-settings adjustment. We see all three on FAAC, Mighty Mule, BFT, and LiftMaster operators around Greeneville. Most opener repairs run $225-$650, parts included. Call (877) 610-2993 and we’ll put you in the schedule.
Yes. A lot of Greene County acreage gates are too far from mains power to run conduit practically, so we install solar-powered openers with a battery bank and charge controller. The trick is sizing the panel to the drive type and cycle frequency, and we do that based on your actual gate usage, not a blanket guess. It’s the cleanest way to automate a wide farm gate on a county road with no power at the fence. We’ll spec the brand and size for free, and the price is set before we order anything.
In most cases, yes. The issue is usually the anchor bolts working loose from years of moisture expansion and winter frost. We remove the old anchors, drill and set new epoxy anchors, and re-mount the hinging hardware. If the brick face is spalling badly, we may need to reinforce the mounting area before setting new anchors. This is common on older homes in Greeneville’s historic district where the pillars have decades of weathering. We can usually do this in a single visit. Call (877) 610-2993 and we’ll come take a look.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Greeneville and the surrounding area.