Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Evergreen
Gate motor repair in Evergreen typically runs $260-$680 depending on whether we’re replacing a stripped gear, a dead control board, or the entire operator. Most jobs are done in one visit, and Hal Gatewood answers the phone himself at (877) 610-2993.
Evergreen isn’t Denver, and neither are your gate problems. At 7,000 feet with bears, heavy wet snow, and freeze-thaw cycles that heave post footings every winter, a gate motor up here takes abuse that a flatlands operator never sees. That’s why we stock parts for the brands Evergreen homeowners actually run: FAAC, BFT, Linear, Viking, LiftMaster, and Mighty Mule. We’ve been doing Gate Motor & Opener work since 2001, and we show up knowing what a mountain driveway does to a gearbox.
We serve the whole Evergreen corridor: 80437, 80439, and every ridge, canyon, and private road in between. When your gate quits at 6 a.m. and the bear is already eyeing your trash cans, a live person picks up. Not a voicemail. Not a call queue. Call (877) 610-2993 and you’ll get Hal or someone on his crew, night or day.
Why Gatewood Fence & Gate Is Evergreen’s Preferred Gate Motor & Opener Company
Hal Gatewood has been owner-operated since 2001, and his name is on the shop and every invoice. That’s not marketing. That’s accountability. When you call about your gate motor in Evergreen, you talk to someone who has welded the bracket, pulled the wire, or set the post on hundreds of gates just like yours.
We don’t subcontract. The person who shows up at your driveway is background-checked, uniformed, and trained on the nine major brands we service: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When something goes wrong, the same person comes back. The 90-Day Done Right Promise is in writing on every job. If it’s not right, one call brings Hal back. No runaround.
Evergreen homeowners tell us the same thing again and again: they called one of the big national companies, got quoted one number, and watched the invoice balloon at the door. We quote the price up front, agree on it before any work starts, and that’s the number you pay. The name is on the shop, the license number is published, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Motor & Opener Services in Evergreen
Motor Repair
We fix what others want to replace. A stripped plastic gear inside a FAAC 400 operator doesn’t mean you need a new motor. It means you need the gear. We stock replacement gears, control boards, capacitors, and limit switches for the brands Evergreen runs, so repair usually happens the same day. On steep Evergreen driveways, a motor that’s been stalling mid-cycle is often fighting a post that heaved out of plumb over the winter. We fix the post, then the motor. Fix the motor without the post and you’ll fix it twice.
Battery Backup
Heavy snowpack downing power lines is a fact of life in Evergreen. A gate with no battery backup becomes a manual wrestle in the dark at 7 p.m. in January. We install and service battery backup systems sized for the cold, not for some warehouse in Aurora. Lithium and AGM options both live here, but lithium performs better in sustained sub-freezing nights above 7,000 feet. We’ll tell you straight which one your operator needs and why.
Intercom Integration
You press the button at the house, the gate should open. When it doesn’t, the problem is rarely the intercom itself. It’s usually the relay, the wiring run down a long Evergreen driveway, or a control board that’s taken one too many power surges from mountain storms. We trace the circuit, test the relay, and integrate intercom, phone app, keypad, and camera entry so everything talks to the operator the way it did when it left the factory.
Motor Installation
New gate operator installation in Evergreen starts with a measured site visit. We look at gate weight, hinge geometry, post depth, grade, and how much snow the gate will push. A 400-pound custom steel gate on a 12% grade off Kerr Gulch needs a different operator than a 200-pound cedar gate on a flat lot in North Evergreen. We don’t guess. We spec the right motor, run the power, set the safety edges and photo eyes, and test the gate through fifty full cycles before we call it done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Evergreen
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Evergreen, we see a lot of FAAC and BFT on the custom steel gates up the private drives, and a steady run of Linear and Viking on older slide gates along the state highway corridors. We stock common boards and gears for these locally, so a repair doesn’t mean a week of waiting for a part from the coast. If your operator is older or discontinued, Hal often has the part on the shelf or can fabricate a bracket in the truck to make a current motor fit your existing mount.
Common Gate Motor & Opener Problems We See in Evergreen Homes
- Bear-forced gate frames and bent racks. Jefferson County’s bear conflict reports concentrate along the Evergreen corridor. A black bear shoving through a swing gate bends the bottom rail, shears rack bolts, and twists the drive track until the operator binds and trips on overload. A standard spring latch is no gate at all once a bear decides the garbage is worth investigating.
- Heaved post footings from freeze-thaw cycling. Evergreen’s elevation means concrete moves several inches every winter. A post that heels out of plumb binds the hinge, throws the operator out of alignment, and breaks hinge welds on custom steel gates. We re-level the post, then recalibrate the operator. Anything else is a band-aid.
- Stripped plastic gears from snowpack overload. Heavy wet snow on a sloped Evergreen driveway adds hundreds of pounds of resistance mid-cycle. Plastic drive gears strip, motors stall, and control boards burn out trying to push through it. We replace the gear, then adjust the operator’s force settings for realistic mountain conditions, not factory presets for flat ground.
- Dead solar batteries from short winter charging windows. Solar operators that work fine in Denver’s 300 days of sun choke at 7,000 feet where winter daylight is short and snow covers the panel. We size the array and battery bank for December, not June, and angle panels to shed snow instead of collecting it.
Pricing for Gate Motor & Opener in Evergreen, CO
Here’s the straight answer. A gear replacement on a FAAC or BFT operator in Evergreen runs $180-$340. A control board replacement runs $260-$520. A full operator replacement, including the motor, arm, receiver, and recalibration, runs $900-$1,800 depending on gate size and grade. Battery backup installation runs $400-$850. Intercom-to-operator relay and integration work runs $180-$400.
What moves the price on your job: gate weight, post condition after winter heave, length of the wiring run from house to gate, and whether the operator is a current model or something from the 1990s. You get the price in writing before we touch a tool. The number on the invoice matches the number on the estimate. Every time.
We also offer $40 off any repair over $200, a free second opinion on any written estimate from another company, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll quote your exact job over the phone or schedule a measure.
We Also Serve Cities Near Evergreen
Our Gate Motor & Opener in Evergreen service area covers the whole corridor, and our crews are also out in Ken Caryl, Golden, Columbine, and Applewood most weeks. If your gate is on the western edge of town or the back side of a canyon, call anyway. We know these roads, and the no-trip-charge policy applies inside the county. We’ll tell you straight if you’re in range.
Serving Evergreen, CO - Our Local Coverage Area
We’re based in the Evergreen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Evergreen
Your operator is fighting three things Denver doesn’t throw at it: heavy wet snow that piles against the gate leaf mid-cycle, a steeper grade that multiplies the operator’s load, and post footings that heave out of plumb every freeze-thaw winter. The factory force settings are calibrated for flat, dry, mild conditions. We adjust the force, re-level the post when needed, and often upgrade the gear from plastic to metal so the operator stops stalling. Call (877) 610-2993 and Hal can usually diagnose it over the phone before we even roll a truck.
Yes, and it happens all the time in Evergreen. A bear shoves through the gate, bends the bottom rail, shears the rack bolts, and twists the drive track. The motor doesn’t fail first. The frame fails, and the motor gets dragged into the damage. We’ve replaced bent LiftMaster slide operators off Buffalo Park Road after exactly this happened. The fix is not just a new motor. It’s straightening or replacing the rail, re-leveling the post, and recalibrating the loop detector so the gate runs true again. A gate that a bear bent once will fail again in the same place unless the frame is corrected.
Only if it’s sized for December, not June. Evergreen’s winter daylight is short, snow covers panels, and temperatures below freezing sap battery capacity. Most solar openers sold online are undersized for a 7,000-foot mountain driveway. We size the panel array and battery bank for your gate’s actual cycle count in the worst month of the year, not the best. If your solar operator keeps dying by January, the problem is almost always an undersized system, not a bad operator. We’ll tell you what it needs to work through an Evergreen winter without a tow from your neighbor’s truck.
The intercom is fine. The problem is between the intercom and the operator: usually a dead relay, a wiring run that’s taken water or rodent damage along a long Evergreen driveway, or a control board on the operator that stopped responding to the open command. We test the relay first, then ring the wire, then check the board. Most of these calls run $180-$400 and are fixed in one trip. Call (877) 610-2993 and we’ll walk through the symptoms before we head out.
You fix the post first. A gate sags in the hinge post, not in the middle, and on a sloped Evergreen lot that post has been fighting gravity and freeze-thaw for years. We dig, re-set, and brace the post with a deeper footing and often add a gusset or weld a reinforcing plate at the hinge point. Then we check the operator’s alignment. A motor pulling against a sagging gate burns itself out. Structural correction comes before any operator work, every time. Show me the gate closing on its own and I’ll show you where it’s failing.
Key Takeaways
- Gate motor repair in Evergreen runs $180-$680 for most jobs; full operator replacement runs $900-$1,800.
- We answer the phone live, 24/7. Not voicemail, not a call center.
- Bears, freeze-thaw heaving, and heavy snowpack are the three big gate motor killers in Evergreen. We engineer for all three.
- Every job carries the 90-Day Done Right Promise in writing.
- Upfront pricing, agreed before work starts. No surprises at the door.
- $40 off repairs over $200, free second opinions on written estimates, no trip charge inside the county, and 10% off for seniors and veterans.
Call Gatewood Fence & Gate for Gate Motor & Opener in Evergreen
If your gate motor is grinding, stalling, or dead entirely, call (877) 610-2993. You’ll talk to a person who knows Evergreen gates, knows what a bear does to a swing gate, and knows what winter does to a post footing. We’ll give you an honest price, schedule a time that works, and show up. The estimate is free. The work is guaranteed. The name on the shop is Hal Gatewood, and he’s been doing this since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Evergreen and the surrounding foothills since 2001.