Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Evergreen
Gate parts and welding in Evergreen, CO usually means one of three things: a hinge post that’s heaved out of plumb, a bottom rail bent by a bear, or a weld that finally gave out after twenty mountain winters. We handle all three, and we do it on site at your driveway, not in some shop down in the flats. Hal Gatewood started Gatewood Fence & Gate in 2001, and we’ve been welding gates back together in Evergreen ever since. If your gate is sagging, binding, or flat-out refusing to close, call (877) 610-2993 and you’ll get a live person who knows exactly what an Evergreen freeze-thaw cycle does to a steel post.
Why Gatewood Fence & Gate Is Evergreen’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, and Hal’s name is on the shop and on every invoice. That’s not a slogan. It means when we weld a hinge or set a post in Evergreen, the person who stands behind the work is the same person who answers the phone. Our crew works in Evergreen regularly, and we know the difference between a gate off Upper Bear Creek Road and one off Highway 74: the grade, the soil, the way snow piles against the operator box. A live person answers our calls 24/7, not a voicemail and not a call center three states away. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround. Evergreen homeowners have been burned by national outfits that quote one price on the phone and charge another at the door. We quote the price up front, we agree on it before any work starts, and we honor it.
We’re certified to service DoorKing, Elite, and Ghost Controls operators, among others, so when a weld repair involves re-setting an automated gate, we handle the mechanical and the welded parts in the same visit. Saves you a second trip and a second bill.
Our Gate Parts & Welding Services in Evergreen
This is the work we do most often in Evergreen. Each one starts with a real diagnosis, not a parts-cannon guess. Show us the gate closing on its own and we’ll show you where it’s failing. A gate sags in the hinge post, not in the middle, and that is where we start.
Hinge Replacement
On a sloped Evergreen driveway, a hinge takes more load than anyone expects. The gate wants to pull downhill constantly, and once a barrel hinge wears even slightly, the whole panel drops and drags. We replace hinges with hardware sized for the actual gate weight and the actual grade, and we weld them where the design calls for it. We see plenty of Evergreen gates where somebody bolted a new hinge onto a rotted or heaved post, and the hinge failed again within six months. That’s not a hinge problem. That’s a post problem, and we fix it at the root.
Post Replacement
Evergreen’s elevation means concrete footings heave several inches over a single winter. The freeze-thaw cycling in mountain soil doesn’t just crack concrete; it shifts it, taking the hinge post with it and throwing the whole gate panel out of square. We dig out the old footing, set the new post deeper and with proper drainage so water doesn’t sit against it, and weld or bolt the gate back to a plumb, solid post. If the post is steel and the base is still sound, we can often cut and sleeve the bad section and weld a new one in place without disturbing the driveway.
Rail Repair
A bent bottom rail on a swing gate in Evergreen is almost always bear work. Black bears push through gates leaning on the frame, and the bottom rail is the first thing to fold. We straighten rails when the metal allows it and weld in reinforcement when it doesn’t. On slide gates, the rack that runs along the bottom takes constant abuse from snowpack and freeze-thaw movement. We rebuild rack and pinion systems, re-torque the operator, and set the gate to run quietly on its rollers again.
Custom Welding
Evergreen has a lot of custom and semi-custom homes with ornamental steel gates that were never off-the-shelf to begin with. When a hand-forged scroll cracks or a custom hinge tears loose, you can’t just order a replacement part from a catalog. That’s where on-site welding earns its keep. We weld in your driveway, matching the existing metal as closely as the material allows, and we reinforce the weak point so it doesn’t fail again in the same spot. For gates that were built with lighter gauge steel than they should have been, we can add gussets and bracing that disappears into the original design.
This is a subset of our broader Gate Parts & Welding work. In Evergreen, custom welding, hinge replacement, and post replacement are the three we see the most, simply because the mountain conditions push gates harder than flat ground ever does.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Evergreen
We’re certified to service nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite. That matters in Evergreen because a lot of the automated driveway gates up here run on operators that were specified by the builder and installed by a crew that may not have been thinking about heavy wet snow and steep grades. We stock common parts for these brands and can get what we don’t have quickly. When a Ghost Controls arm binds because the post shifted out of plumb, the fix isn’t a new operator. It’s a welded post correction, and we do both.
Common Gate Parts & Welding Problems We See in Evergreen Homes
- Post heaving from freeze-thaw cycling. Evergreen’s elevation means the ground moves all winter. A post set in normal concrete without drainage will heave several inches, throwing the gate panel out of square and binding the operator. We see this on gates installed as recently as two years ago.
- Bear intrusion bending frames and shearing latches. Jefferson County’s bear conflict reports are concentrated in this corridor. A standard spring latch is essentially no latch at all once a bear decides the garbage is worth investigating. We replace bent bottom rails, rebuild the latch and lock with heavy-duty hardware, and re-square the gate.
- Heavy wet snowpack collapsing wood frames and killing solar batteries. Annual snowfall here often exceeds 100 inches, and the snow is wet and heavy at this elevation. Wood gate frames that were fine for years finally fold under the weight. Solar opener batteries that work fine in Denver get buried in shade and freeze, then die mid-winter.
- Worn hinges on steep driveways. A gate on a slope pulls downhill constantly. Every Evergreen swing gate we replace hinges on shows exactly the same wear pattern: the bottom hinge wears first, the panel drops, and the latch stops lining up. Anti-sag kits help, but they don’t fix a hinge that’s already ground itself out.
Pricing for Gate Parts & Welding in Evergreen, CO
Hinge replacement in Evergreen typically runs $180 to $340 depending on gate weight and whether we’re welding or bolting. Post replacement runs higher: $450 to $900 once you factor in digging out the old footing, setting the new post with proper drainage, and re-hanging the gate. Rail repair is usually $150 to $400, with custom welded reinforcement at the upper end. Custom welding work is quoted per job, but most Evergreen ornamental gate repairs land between $250 and $800. These are real numbers for this market, not a national average. We quote the full price and agree on it before any work starts, so the invoice matches the quote. We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate and we’ll give you a real number.
We Also Serve Cities Near Evergreen
Our Gate Parts & Welding in Evergreen crew also covers the surrounding foothills and the metro edge: Ken Caryl, Golden, Columbine, and Applewood. If you’re just down the hill and your gate has the same freeze-thaw damage we see every day in Evergreen, call us. The drive is short and the diagnosis is free.
Serving Evergreen, CO - Our Local Coverage Area
We’re based in the Evergreen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Evergreen
Freeze-thaw cycles heave concrete footings several inches over a single winter, which shifts hinge posts and racks the gate panel out of square. That movement stresses every weld and bolt on the gate, and over time it cracks welds, bends rails, and binds automated operators. In Evergreen, a gate that was perfectly square in October can be dragging by March. The fix is a properly set post with drainage and weld repairs that account for the movement, not just a quick patch that fails again next year. Call us for an exact quote and we’ll tell you straight what needs to happen.
Start by watching the gate close: if the photoelectric sensor is working, the gate should stop and reverse when anything breaks the beam. If it keeps closing after a bear bent the frame, the sensor may be misaligned from the impact or the wiring may have pulled loose. We check the beam alignment, the wiring to the operator, and the physical mounting brackets, because on an Evergreen gate a bear hit usually moves the post or the rail enough to knock the sensors out of line. If the gate closes hard against a bent rail instead of reversing, have a qualified tech check the entire system before using it again. Call us and we’ll run the full safety check while we’re there for the frame repair.
Yes, but the honest answer is that no gate is bear-proof if the bear is determined. What we can do is build and reinforce a gate so a bear leaning on it doesn’t fold the bottom rail or shear the latch bolts. That means heavier gauge steel on the lower frame, welded gussets at the corners, a heavy-duty latch and lock, and a properly set post that doesn’t move when the gate takes a hit. We’ve rebuilt gates in Evergreen after bear encounters and reinforced them to survive the next one with nothing worse than a scratch. Call (877) 610-2993 for a free estimate and we’ll spec it out.
An anti-sag kit is a band-aid. It adds a cable and turnbuckle to pull the gate back into square, but it doesn’t fix a hinge that’s already worn out or a post that’s heaved out of plumb. On a steep Evergreen driveway, the bottom hinge takes the load continuously, and once it’s worn, no amount of cable tension fixes the problem. Hinge replacement addresses the actual failure: we take the gate down, replace the worn hinge with properly sized hardware, and re-hang the gate so it swings true. If the post has moved, we fix that too. Fix the panel without the post and you’ll fix it twice. Call us for a straight answer on which fix your gate actually needs.
Evergreen gets over 100 inches of snow a year, and at 7,000 feet the snow is heavy and wet. Solar panels get buried, the days are short, and the battery sits in the cold for months. That combination drains a solar opener battery in a way Denver’s flatlands never sees. The fix is usually a larger panel, a battery sized for cold-weather draw, and a panel mounted where winter sun actually hits it. If the opener has been fighting a gate that’s out of square from frost heave, the motor draws more current and kills the battery faster. We diagnose the whole system, not just the battery. Call us and we’ll sort out whether it’s the panel, the battery, or the gate itself.
When you need gate parts and welding that actually hold up in Evergreen’s conditions, call (877) 610-2993. A live person answers, the estimate is free, and the work comes with the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Evergreen for over two decades.